Er and Gd Co-Doped Ceria-Based Electrolyte Materials for IT-SOFCs Prepared by the Cellulose-Templating Method
Source abstract
Abstract
Ce0.9−x Gd0.1Er x O1.9−x/2 (0 ≤ x ≤ 0.1) (EGDC) powders were successfully synthesized with a fast and facile cellulose-templating method for the first time and characterized by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The samples were calcined at a relatively low calcination temperature of 773 K (500 °C). The sintering behavior of the calcined EGDC powders was also investigated at 1673 K (1400 °C) for 6 hours. Calcined Ce0.9−x Gd0.1Er x O1.9−x/2 (0 ≤ x ≤ 0.1) powders and sintered Ce0.9−x Gd0.1Er x O1.9−x/2 (0 ≤ x ≤ 0.1) pellets crystallized in the cubic fluorite structure. It was found that the relative densities of the sintered EGDC pellets were over 95 pct for all the Er contents studied. Moreover, the effect of Er content on the ionic conductivity of the gadolinium-doped ceria (GDC, Ce0.9Gd0.1O1.90) was investigated. The highest ionic conductivity value was found to be 3.57 × 10−2 S cm−1 at 1073 K (800 °C) for the sintered Ce0.82Gd0.1Er0.08O1.91 at 1673 K (1400 °C) for 6 hours.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. J.P.P. Huijsmans, F.P.F. van Berkel and G.M. Christie: J. Power Sources, 1998, vol 71, pp. 107–10.10.1016/S0378-7753(97)02789-4 ↗
2. H.Yoshida, K. Miura, T. Fukui, S. Ohara and T. Inagaki: J. Power Sources, 2002, vol. 106, pp. 136–41.10.1016/S0378-7753(01)01038-2 ↗
3. X. Guan, H. Zhou, Y. Wang and J. Zhang: J. Alloys Compd., 2008, vol. 464, pp. 310–6.10.1016/j.jallcom.2007.09.116 ↗
4. S. Kuharuangrong, J. Power Sources, 2007, vol. 171, pp. 506–10.10.1016/j.jpowsour.2007.05.104 ↗
5. D.H. Prasad, J.W. Son, B.K. Kim, H.W. Lee, and J.H. Lee: J. Eur. Ceram. Soc., 2008, vol. 28, pp. 3107–112.10.1016/j.jeurceramsoc.2008.05.021 ↗
6. L.D. Jadhav, S.H.Pawar, M.G. Chourashiya: Bull. Mater. Sci., 2007, 30 (2) 97–100.10.1007/s12034-007-0017-6 ↗
7. S.Wang, T. Kobayashi, M.Dokiya, T. Hashimoto: J. Electrochem. Soc., 2000, Vol.147 (10), pp. 3606–09.10.1149/1.1393946 ↗
8. M. Jamshidijam, R.V. Mangalaraja, A. Akbari-Fakhrabadi, S. Ananthakumar, S.H. Chan: Powder Technol., 2014, vol. 253, pp. 304–310.10.1016/j.powtec.2013.10.032 ↗
9. F.Wang, S. Chen, Q. Wang, S. Yu, and S. Cheng: Catal. Today, 2004, vol. 97, pp. 189–94.10.1016/j.cattod.2004.04.059 ↗
10. F.Y. Wang, S.Y. Chen, and S. Cheng: Electrochem. Commun., 2004, vol.6, pp. 743–46.10.1016/j.elecom.2004.05.017 ↗
11. S. Lubke and H.D. Wiemhofer: Solid State Ionics, 1999, vol.117, pp. 229–243.10.1016/S0167-2738(98)00408-1 ↗
12. X.Q. Sha, Z. Lu, X.Q. Huang, J.P. Miao and L. Jia: J. Alloys Compd., 2006, vol. 424, pp. 315–21.10.1016/j.jallcom.2005.12.061 ↗
13. T. Mori, J. Drennan, J.H. Lee, J.G. Li, and T. Ikegami: Solid State Ionics, 2002, vol. 154–155, pp. 461–66.10.1016/S0167-2738(02)00483-6 ↗
14. H. Yoshida, H. Deguchi, K.Miura and M. Horiuchi: Solid State Ionics, 2001, vol. 140, pp. 191–99.10.1016/S0167-2738(01)00854-2 ↗
15. G.S. Wu, T. Xie, X.Y.Yuan, B.C.Cheng, L.D. Zhang: Mater. Res. Bull., 2004, vol. 39, pp. 1023–28.10.1016/j.materresbull.2004.03.006 ↗
16. M. Hirano, E. Kato: J. Am. Ceram. Soc., 1996, vol. 79 (3), pp. 777–780.10.1111/j.1151-2916.1996.tb07943.x ↗
17. Y.C. Zhou, M.N. Rahman: J. Mater. Res., 1993, vol. 8, pp. 1680–86.10.1557/JMR.1993.1680 ↗
18. N. Uekewa, M. Ueta, Y.J. Wu, K. Kakewa: Chem. Lett., 2002, vol. 8, pp. 854.10.1246/cl.2002.854 ↗
19. H.I. Chen, H.Y. Chang: Colloids Surf. A, 2004, vol. 242, pp. 61–69.10.1016/j.colsurfa.2004.04.056 ↗
20. C.R. Xia, M.L. Liu: Solid State Ionics, 2002, 423 pp. 152–53.
21. M.M.A. Sekar, S.S. Manoharan, K.C. Patil: J. Mater. Sci. Lett., 1990, vol. 9, pp. 1205–06.10.1007/BF00721893 ↗
22. J. Chandradass, B. Nam, K.H. Kim: Colloids Surf. A, 2009, vol. 348, pp. 130–36.10.1016/j.colsurfa.2009.07.012 ↗
23. R.A. Rocha, E.N.S. Muccillo: Mater. Res. Bull., 2003, vol. 38 pp. 1979–86.10.1016/j.materresbull.2003.09.025 ↗
24. B. Matovic, Z. Dohcevic-Mitrovic, M. Radovic, Z. Brankovic, G. Brankovic, S. Boskovic, and Z.V. Popovic: J. Power Sources, 2009, vol.193 (1), pp. 146–49.10.1016/j.jpowsour.2009.03.053 ↗
25. A.N. Shigapov, G.W. Graham, R.W. McCabe, Jr H.K. Plummer: Appl. Catal. A, 2001, vol. 210, pp. 287–300.10.1016/S0926-860X(00)00820-6 ↗
26. K. Langfeld, R. Marschner, B. Frank, R.Schomaker: ChemCatChem, 2011; vol. 3(8), pp. 1354–58.10.1002/cctc.201100033 ↗
27. B. Uslu, A. Aytimur, M.K. Ozturk, S. Kocyigit: Ceram. Int., 2012, vol. 38, pp. 4943–51.10.1016/j.ceramint.2012.02.087 ↗
28. S. Zha, C. Xia, G. Meng: J. Power Sources, 2003, vol.115, pp. 44–48.10.1016/S0378-7753(02)00625-0 ↗
29. V. Sarıboğa, H.Özdemir, M.A.F. Öksüzömer: J. Eur. Ceram. Soc., 2013, vol.33, pp. 1435–46.10.1016/j.jeurceramsoc.2013.01.016 ↗
30. R.O. Fuentes, R.T. Baker: J. Power Sources, 2009, vol. 86, pp. 268–277.10.1016/j.jpowsour.2008.09.119 ↗
31. M.A.F. Öksüzömer, G. Dönmez, V. Saribooğa, T.G. Altinçekiç: Ceram. Int., 2013, vol. 39, pp. 7305–315.10.1016/j.ceramint.2013.02.069 ↗
32. J. Li, T. Ikegami, T.Mori: Acta Mater., 2004, vol.52, pp. 2221–28.10.1016/j.actamat.2004.01.014 ↗
33. X.Guan, H.Zhou, Z.Liu, Y.Wang, J.Zhang: Mater. Res. Bull., 2008, vol. 43 pp. 1046–1054.10.1016/j.materresbull.2007.04.027 ↗
34. S.J. Hong and A.V. Virkar: J. Am. Ceram. Soc., 1995, vol. 78, pp. 433–39.10.1111/j.1151-2916.1995.tb08820.x ↗
35. A. Gondolini, E. Mercadelli, A. Sanson, S. Albonetti, L. Doubova, S. Boldrini: Ceram. Int., 2011, vol. 37, pp. 1423–6.10.1016/j.ceramint.2011.01.010 ↗
36. C. Veranitisagul, A. Kaewvilai, W. Wattanathana, N. Koonsaeng, E. Traversa, A. Laobuthee: Ceram. Int., 2012, vol.38, pp. 2403–9.10.1016/j.ceramint.2011.11.006 ↗
37. E. Barsoukov, J.R. MacDonald: Impedance Spectroscopy Theory, Experiment, and Applications, 2nd Edition, Wiley, Hoboken, 2005.10.1002/0471716243 ↗
38. J.E. Bauerle: J. Phys. Chem. Solids, 1969, vol.30 (12), pp. 2657–70.10.1016/0022-3697(69)90039-0 ↗
39. J. Luo, R.J. Ball, R. Stevens: J. Mater. Sci., 2004, vol. 39, pp. 235–40.10.1023/B:JMSC.0000007749.72739.bb ↗
40. J.G. Cheng, S.W. Zha, J. Huang, X.Q. Liu, G.Y. Meng: Mater. Chem. Phys., 2003, vol. 78, pp. 791–95.10.1016/S0254-0584(02)00384-X ↗
41. M.G. Chourashiya, J.Y. Patil, S.H. Pawar, L.D. Jadhav: Mater. Chem. Phys., 2008, vol. 109, pp. 39–44.10.1016/j.matchemphys.2007.10.028 ↗
42. S. Ramesh and C.V. Reddy: Acta Phys. Pol. A, 2009, vol.115, pp. 909–13.10.12693/APhysPolA.115.909 ↗
43. F.Y. Wang, B.Z. Wan, S. Cheng : J. Solid State Electrochem., 2005, vol.9, pp. 168–173.10.1007/s10008-004-0575-0 ↗
44. J.Kim, and D.Lee: Korean J. Chem. Eng., 2002, vol.19(3), pp. 421–424.10.1007/BF02697150 ↗
45. J.A. Kilner and B.C.H. Steele: in Nonstoichiometric Oxides O.T.Sorensen, ed., New York: Academic Press, pp. 233–269, 1981.10.1016/B978-0-12-655280-5.50010-9 ↗
46. S.C. Singhal, K. Kendall, High Temperature Solid Oxide Fuel Cells: Fundamentals, Design, and Applications, Elsevier, Oxford, 2003.