journal article·2011-08

Microstructural Evolution in Ti-5111 Friction Stir Welds

K. E. Knipling, R. W. Fonda

Publisher page

Abstract

The microstructural evolution occurring during friction stir welding of a near-α titanium alloy, Ti-5111, has been examined by backscattered electron imaging and electron backscatter diffraction. The unaffected baseplate (BP) microstructure consists of millimeter-scale prior β grains containing ~100 μm large colonies of aligned α laths, related to each other by a strain-accommodating Burgers orientation relationship. The α laths are separated by fine, 100 to 150-nm-thick, interlath β ribs. A heat-affected zone (HAZ) is observed ~1.5 to 2.5 mm from the tool surface, characterized by a thickening of the β ribs and the formation of secondary α platelets within them closer to the tool. There is a narrow thermomechanically affected zone (TMAZ), comprised of outer and inner regions, observed ~1.0 to 1.5 mm from the tool surface. Deformation is first observed in a ~200-μm-wide outer TMAZ, where the microstructure is refined through an increase in fine secondary (α laths) α laths and the lattice orientations rotate to align the close-packed \(\langle{11\bar{2}0}\rangle\) directions with the shear direction (SD). Continued deformation closer to the tool produces periodic shear bands within a ~300-μm-wide inner TMAZ, resulting in alternating regions of material that are deformed below and above the β transus. Material in the stir zone (SZ) within ~1 mm of the tool surface consists of fine (~10 to 20-μm diameter) equiaxed prior β grains that are delineated by ~500-nm-thick α and contain 150-500-nm thick α laths. The texture exhibits both \(D_1({\bar{1}\bar{1}{2}})[111]\) bcc and \({P_1({1}\bar{1}00)}[11\bar{2}0]\) hcp shear texture components, indicating that this material exceeded the β transus during welding.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Titanium Alloys Microstructure and Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Temple-Smith, and C.J. Dawes: G.B. Patent Application No. 9,125,978.8, 1991
2. U.S. Patent No. 5,460,317, 1995.
3. K.V. Jata, S.L. Semiatin Scripta Mater. 43,743–49 (2000)10.1016/S1359-6462(00)00480-2 ↗
4. J.Q. Su, T.W. Nelson, R.Mishra, M. Mahoney, Acta Mater., 51. 713–29 (2003)10.1016/S1359-6454(02)00449-4 ↗
5. R.W. Fonda, J.F. Bingert, K.J. Colligan, Scripta Mater., 51, 243–48 (2004)10.1016/j.scriptamat.2004.04.017 ↗
6. R.W. Fonda, J.F. Bingert, Metall. Mater. Trans. A, 35A, 1487–99 (2004)10.1007/s11661-004-0257-7 ↗
7. J.A. Schneider, A.C. Nunes, Metall. Mater. Trans. B, 35B, 777–83 (2004)10.1007/s11663-004-0018-4 ↗
8. J.Q. Su, T.W. Nelson, C.J. Sterling, Mater. Sci. Eng. A, 405A, 277–86 (2005)
9. P.B. Prangnell, C.P. Heason, Acta Mater., 53, 3179–92 (2005)10.1016/j.actamat.2005.03.044 ↗
10. R.W. Fonda, J.F. Bingert, Scripta Mater., 57, 1052–55 (2007)10.1016/j.scriptamat.2007.06.068 ↗
11. R.W. Fonda, K.E. Knipling, J.F. Bingert, Scripta Mater., 58, 343–48 (2008)10.1016/j.scriptamat.2007.09.063 ↗
12. Y.S. Sato, T.W. Nelson, C.J. Sterling, Acta Mater., 53, 637–45 (2005)10.1016/j.actamat.2004.10.017 ↗
13. Y.S. Sato, T.W. Nelson, C.J. Sterling, R.J. Steel, C.O. Pettersson, Mater. Sci. Eng. A, 397, 376–84 (2005)10.1016/j.msea.2005.02.054 ↗
14. S. Mironov, Y.S. Sato, H. Kokawa, Acta Mater., 56, 2602–14 (2008)10.1016/j.actamat.2008.01.040 ↗
15. A.J. Ramirez, M.C. Juhas, Mater. Sci. Forum, 426-432, 2999–3004 (2003)10.4028/www.scientific.net/MSF.426-432.2999 ↗
16. A.P. Reynolds, E. Hood, W. Tang, Scripta Mater., 52, 491–94 (2005)10.1016/j.scriptamat.2004.11.009 ↗
17. W.B. Lee, C.Y. Lee, W.S. Chang, Y.M. Yeon, S.B. Jung, Mater. Lett., 59, 3315–18 (2005)10.1016/j.matlet.2005.05.064 ↗
18. R.W. Fonda and K.E. Knipling: Friction Stir Welding and Processing V, R.S. Mishra, M.W. Mahoney, and T.J. Lienert, eds., TMS, Warrendale, PA, 2009, pp. 11–19
19. K.E. Knipling, R.W. Fonda, Scripta Mater., 60, 1097–100 (2009)10.1016/j.scriptamat.2009.02.050 ↗
20. P.G. Partridge, Metall. Rev., 12, 169–94 (1967)10.1179/imr.1967.12.1.169 ↗
21. M.H. Yoo, Metall. Trans. A, 12A, 409–18 (1981)10.1007/BF02648537 ↗
22. H. Numakura, M. Koiwa, Metall. Sci. Technol., 16, 4–19 (1998)
23. G. Lutjering and J.C. Williams: Titanium, 2nd ed., Springer, New York, NY, 2007, pp. 19–21
24. N.E. Paton, W.A. Backofen, Metall. Trans., 1, 2839–47 (1970)10.1007/BF03037822 ↗
25. T. Xiaoli, G. Haicheng, Z. Shufen, C. Laird, Mater. Sci. Eng. A, 189, 77–84 (1994)10.1016/0921-5093(94)90403-0 ↗
26. J.W. Christian, S. Mahajan, Progr. Mater. Sci., 39, 1–157 (1995)10.1016/0079-6425(94)00007-7 ↗
27. S. Zaefferer, Mater. Sci. Eng. A, 344, 20–30 (2003)10.1016/S0921-5093(02)00421-5 ↗
28. J. Been, K. Faller, JOM, 51, 21–24 (1999)10.1007/s11837-999-0088-5 ↗
29. R.W. Fonda, K.E. Knipling, C.R. Feng, and D.W. Moon: in Friction Stir Welding IV, R.S. Mishra, M.W. Mahoney, T.J. Lienert, and K.V. Jata, eds., TMS, Warrendale, PA, 2007, pp. 295–302
30. N.E. Paton, W.A. Backofen, Trans. TMS-AIME, 245, 1369–70 (1969)
31. I. Kim,W. S. Jeong, J. Kim, K. T. Park, and D. H. Shin, Scripta Mater., 2001, vol. 45, pp. 575–80.10.1016/S1359-6462(01)01065-X ↗
32. D.H. Shin, I.Kim, J.Kim, Y.T. Zhu, Mater. Sci. Eng. A, 334, 239–45 (2002)10.1016/S0921-5093(01)01813-5 ↗
33. D.H. Shin, I.Kim, J.Kim, Y.S. Kim, S.L. Semiatin, Acta Mater., 51, 983–96 (2003)10.1016/S1359-6454(02)00501-3 ↗
34. I. Kim, J. Kim, D. H. Shin, X. Z. Laio, Y.T. Zhu, Scripta Mater., 48, 813–17 (2003)10.1016/S1359-6462(02)00513-4 ↗
35. G.G. Yapici, I.Karaman, Z.P. Luo, Acta Mater., 54, 3755–71 (2006)10.1016/j.actamat.2006.04.007 ↗
36. G. Lutjering and J.C. Williams: Titanium, 2nd ed., Springer, New York, NY, 2007, pp. 29–33
37. W.G. Burgers, Physica, 1, 561–86 (1934)10.1016/S0031-8914(34)80244-3 ↗
38. S. Wang, M. Aindow, M. Starink, Acta Mater., 51, 2485–2503 (2003)10.1016/S1359-6454(03)00035-1 ↗
39. G. Wegmann, J. Albrecht, G. Lutjering, K. Folkers, C. Liesner, Z. Metallkd., 88, 764–73 (1997)
40. G. Lutjering, Mater. Sci. Eng. A, 243, 32–45 (1998)10.1016/S0921-5093(97)00778-8 ↗
41. G. Lutjering and J.C. Williams: Titanium, 2nd ed., Springer, New York, NY, 2007, pp. 243–45
42. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier, Oxford, 1995, pp. 369–8210.1016/B978-0-08-041884-1.50017-9 ↗
43. Y. Zhang, Y.S. Sato, H. Kokawa, S.H.C. Park, S. Hirano, Mater. Sci. Eng. A, 488, 25–30 (2008)10.1016/j.msea.2007.10.062 ↗
44. M.J. Rubal, J.C. Lippold, and M.C. Juhas: Joining of Advanced and Specialty Materials X, Materials Science and Technology 2008, TMS, Warrendale, PA, 2008, pp. 1–8
45. M. Rubal, J. Lippold, and M.C. Juhas: Friction Stir Welding and Processing V, R.S. Mishra, M.W. Mahoney, and T.J. Lienert, eds., TMS, Warrendale, PA, 2009, pp. 21–28
46. M.J. Rubal, M.C. Juhas, and J.C. Lippold: Proc. 8th Int. Symp. on Friction Stir Welding, TWI, Timmendorfer Strand, Germany, 2010, pp. 1–14
47. M.C. Juhas, G.B. Viswanathan, and H.L. Fraser: Proc. Lightweight Alloys for Aerospace Applications, K.V. Jata, E.W. Lee, W.G. Frazier, and N.J. Kim, eds., TMS, Warrendale, PA, 2001, pp. 209–17
48. A.L. Pilchak, M.C. Juhas, J.C. Williams, Metall. Mater. Trans. A, 38A, 401–08 (2007)10.1007/s11661-006-9061-x ↗
49. Y.Zhang, Y.S. Sato, H.Kokawa, S.H.C. Park, S. Hirano, Mater. Sci. Eng. A. 485, 448–55 (2008)10.1016/j.msea.2007.08.051 ↗
50. L. Zhou, H.J. Liu, Q.W. Liu, J. Mater. Sci. 45, 39–45 (2010)10.1007/s10853-009-3881-1 ↗
51. L. Zhou, H.J. Liu, Q.W. Liu, Mater. Des., 31, 2631–36 (2010)10.1016/j.matdes.2009.12.014 ↗
52. A.L. Pilchak, J.C. Williams, Metall. Mater. Trans. A, 42A, 773–94 (2011)10.1007/s11661-010-0434-9 ↗
53. A.L. Pilchak, W. Tang, H. Sahiner, A.P. Reynolds, J.C. Williams, Metall. Mater. Trans. A, 42A, 745–62 (2011)10.1007/s11661-010-0439-4 ↗
54. D.P. Field, T.W. Nelson, Y. Hovanski, K.V. Jata, Metall. Mater. Trans. A, 32A, 2869–77 (2001)10.1007/s11661-001-1037-2 ↗
55. R.W. Fonda, K.E. Knipling, Acta Mater, 58, 6452–63 (2010)10.1016/j.actamat.2010.08.007 ↗
56. R.W. Fonda, J.F. Bingert, Metall. Mater. Trans. A, 37A, 3593–3604 (2006)10.1007/s11661-006-1054-2 ↗
57. R.W. Fonda, J.A. Wert, A.P. Reynolds, W. Tang, Sci. Technol. Weld. Join., 12, 304–10 (2007)10.1179/174329307X197557 ↗
58. Timetal 5111, Technical Report, Timet, Henderson, NV, 2000.
59. M.Döner, H. Conrad, Metall. Trans., 4, 2809–17 (1973)10.1007/BF02644581 ↗
60. C. Yin, M.Döner, H. Conrad, Metall. Trans. A, 6A, 1901–08 (1975)10.1007/BF02646854 ↗
61. H. Oikawa: J. Iron Steel Inst. Jpn., 1986, vol. 72, pp. 271–75.10.2355/tetsutohagane1955.72.2_271 ↗
62. I. Weiss, S. Semiatin, Mater. Sci. Eng. A, 263, 243–56 (1999)10.1016/S0921-5093(98)01155-1 ↗
63. R.S. Mishra, Z.Y. Ma, Mater. Sci. Eng. R, 50, 1–78 (2005)10.1016/j.mser.2005.07.001 ↗
64. P.R. Dawson, personal communication, Sibley School of Mechanical and Aerospace Engineering at Cornell University.