journal article·2007-05

Effects of Strain Rate of Prior Deformation on Corrosion and Corrosive Wear of AISI 1045 Steel in a 3.5 Pct NaCl Solution

SONGBO YIN, D.Y. LI, R. BOUCHARD

Publisher page

Abstract

Wear of materials in corrosive environments has received considerable interest in recent years. It has been demonstrated that the wear-corrosion synergy can be markedly affected by the strain rate. In this study, effects of strain rate of prior deformation on corrosion and corrosive wear of AISI 1045 steel in a 3.5 pct NaCl solution were investigated using an electrochemical test, scanning Kelvin probing, and corrosive sliding wear tests, respectively. Six strain rates of prior deformation, from 7.5 × 10−4 s−1 to 2 s−1, were employed for this study. In order to understand the mechanism responsible for the effects of the strain rate on corrosion and corrosive wear, worn surfaces, subsurface microstructure, microcracks, and residual strain were examined with scanning electron microscopy (SEM) X-ray line profile analysis. Microhardness tests were also carried out to investigate corresponding changes in mechanical properties of surface layers with respect to the strain rate. Based on the effects of prior strain at different rates on surface microstructure and resultant changes in electrochemical and mechanical properties, the corresponding wear behavior of the steel in the 3.5 pct NaCl solution is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Mechanical stress and fatigue analysis · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. D.J. Dunn: in Wear of Materials, K.C. Ludema, ed., ASME, New York, NY, 1985, pp. 501–08
2. D.L. Olson and C.E. Cross: ASM Handbook, vol. 18, Friction, Lubrication and Wear Technology, ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 942–1021
3. W.J. Schumacher: Mater. Perform., 1993, vol. 23, pp. 50–53
4. P.A. Engel: Impact Wear of Materials, Elsevier, The Netherlands, 1978, pp. 339–76
5. H.A. Kader, S.M. El-Raghy: Corr. Sci., 1986, vol. 26, pp. 647–5810.1016/0010-938X(86)90029-6 ↗
6. A.W. Bachelor, G.W. Stachowiak: Wear, 1988, vol. 123, pp. 281–8810.1016/0043-1648(88)90144-5 ↗
7. D. Kotlyar, C.H. Pitt, M.E. Wadsworth: Corrosion, 1988, vol. 44, pp. 221–3410.5006/1.3583929 ↗
8. A.K. Gangopadhyay, J.J. Moore: SME-AIME Fall Meeting, AIME, New York, NY, 1984, pp. 120–31
9. S.W. Watson, F.J. Friedersdorf, B.W. Madsen, S.D. Cramer: Wear, 1995, vols. 181–183, pp. 476–8410.1016/0043-1648(94)07108-X ↗
10. M.M. Stack, N. Pungwiwat: Wear, 2004, vol. 256, pp. 565–7610.1016/S0043-1648(03)00566-0 ↗
11. M.M. Stack, K. Chi: Wear, 2003, vol. 255, pp. 456–6510.1016/S0043-1648(03)00203-5 ↗
12. J. Jiang, M.M. Stack, A. Neville: Tribol. Int., 2002, vol. 35, pp. 669–7910.1016/S0301-679X(02)00058-0 ↗
13. S. Mischler, S. Debaud, and D. Landolt: J. Electrochem. Soc., vol. 145, pp. 750–6410.1149/1.1838341 ↗
14. P. Jemmely, S. Mischler, D. Landolt: Wear, 2000, vol. 237, pp. 63–7210.1016/S0043-1648(99)00314-2 ↗
15. C.-O.A. Olsson, M. Stemp: Electrochim. Acta, 2004, vol. 49, pp. 2145–5410.1016/j.electacta.2003.12.041 ↗
16. Songbo Yin, D.Y. Li: Mater. Sci. Eng. A, 2005, vol. 394, pp. 266–7610.1016/j.msea.2004.11.054 ↗
17. W.S. Lee, H.F. Lam: J. Mater. Processing Technol., 1996, vol. 57, pp. 233–4010.1016/0924-0136(95)02068-3 ↗
18. K.P. Staudhammer, L.E. Murr: Mater. Sci. Eng., 1980, vol. 44, pp. 97–11310.1016/0025-5416(80)90235-9 ↗
19. C.Y. Chiem, J. Duffy: Mater. Sci. Eng., 1983, vol. 57, pp. 233–4710.1016/0025-5416(83)90213-6 ↗
20. S.B. Yin, D.Y. Li: Wear, 2005, vol. 259, pp. 383–9010.1016/j.wear.2005.02.042 ↗
21. H.P. Klug, L.E. Alexander: X-Ray Diffraction Procedures For Polycrystalline and Amorphous Materials, 2nd ed., John Wiley & Sons, New York, NY, 1974, pp. 276–310
22. I.D. Baikie, P.J. Estrup: Rev. Sci. Instrum., 1998, vol. 69, pp. 3902–0510.1063/1.1149197 ↗
23. F.C. Frank: Proc. Phys. Soc., London, 1949, vol. A62, pp. 131–3810.1088/0370-1298/62/2/307 ↗
24. J.D. Eshelby: Proc. Phys. Soc., London, 1949, vol. A62, pp. 307–1210.1088/0370-1298/62/5/307 ↗
25. G. Leibfried, H.D. Dietz: Z. Phys., 1949, vol. 126, pp. 790–80410.1007/BF01368757 ↗
26. J.D. Eshelby: in Solid State Physics, F. Seitz and D. Turnbull, eds., Academic Press, New York, 1956, vol. 3, pp. 79–9110.1016/S0081-1947(08)60132-0 ↗
27. M.A. Meyers: Dynamic Behaviour of Materials, John Wiley & Sons, New York, NY, 1994, pp. 1–65010.1002/9780470172278 ↗
28. T.Z. Blazynski: Materials at High Strain Rates, Elsevier, New York, NY, 1987, pp. 243–89
29. N.W. Ashcroft, N.D. Mermin: Solid State Physics, Holt, Rinehart, and Winston, New York, NY, 1976, pp. 112–50
30. W. Li, D.Y. Li: J. Chem. Phys., 2005, vol. 6, pp. 122–29
31. D.Y. Li: Phys. Status Solidi, A, 2002, vol. 191, pp. 427–3410.1002/1521-396X(200206)191:2<427::AID-PSSA427>3.0.CO;2-H ↗
32. W. Li, D.Y. Li: Mater. Sci. Technol., 2002, vol. 18, pp. 1057–6210.1179/026708302225005918 ↗
33. W. Li, D.Y. Li: Appl. Surf. Sci., 2005, vol. 240, pp. 388–9210.1016/j.apsusc.2004.07.017 ↗
34. I.M. Hutchings: Tribology: Friction and Wear of Engineering Materials, Edward Arnold, London, 1992, pp. 89–90
35. H.H. Uhlig: in Physical Metallurgy of Stress Corrosion Fracture, T.N. Rhodin, ed., Interscience Publishers, New York, NY, 1959, pp. 67–98
36. H.L. Logan: J. Res. Nat. Bur. Stand., 1952, vol. 48, pp. 99–10510.6028/jres.048.013 ↗
37. E.N. Pugh: Corrosion, 1985, vol. 41, pp. 517–2310.5006/1.3583022 ↗
38. J.J. Harwood: Stress Corrosion Cracking and Embrittlement, W.D. Robertson, ed., John Wiley & Sons, New York, NY, 1956, pp. 25–85
39. P.R. Swann, J.D. Embury: High Strength Materials, John Wiley & Sons, New York, NY, 1965, pp. 327–64