Oxidation of Low-Carbon Steel in 17H2O-N2 at 900 °C
Source abstract
Abstract
The oxidation kinetics of two low-carbon steels in a flowing 17H2O-N2 gas mixture at 900 °C and the scale structures developed are examined. Similar linear and parabolic oxidation kinetics are observed for the two steels, although some differences are observed within the first 5 minutes of oxidation and in the linear-to-parabolic transition period. The oxidation behaviors observed in the linear kinetics stage are more consistent with published results, exhibiting typical surface-reaction-controlled patterns. However, the observed parabolic oxidation rates are two orders of magnitude smaller than those of iron and steel oxidation in air and oxygen as well as that predicted using Wagner’s parabolic oxidation theory. Similar oxide scale structures are observed on the two steels for the samples oxidized for more than 15 minutes. The surfaces of the scales exhibit pyramidal, faceted grain structures with growth ledges developed on some crystal faces and growth pits at the peaks of the pyramidal grains. In their cross sections, the scales have a columnar structure and appear two layered, with a thin, outer magnetite layer and an inner, growing wustite layer. The wustite grains coarsen with increased oxidation time and develop a growth texture with preferred (111) and (110) orientations in parallel to the sample surface after oxidation for longer than 60 minutes. Conventional oxidation theories cannot provide a satisfactory explanation of the apparently conflicting results observed during the parabolic oxidation stage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · High-Temperature Coating Behaviors · Magnetic Properties and Synthesis of Ferrites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. P. Campbell, W. Blejde, R. Mahapatra, R. Wechsler, and G. Gillen: Iron Steel Technol., 2005, vol. 2 (7), pp. 56–62.
2. R.I.L. Guthrie: Iron Steel Technol., 2006, vol. 3 (9), pp. 104–14.
3. R.Y. Chen and W.Y.D. Yuen: in Developments in High-Temperature Corrosion and Protection of Materials, Wei Gao and Zhengwei Li, eds., Woodhead Publishing Limited, Cambridge, United Kingdom, 2008, pp. 192–252.10.1533/9781845694258.1.192 ↗
4. H.-J. Selenz and F. Oeters: Arch. Eisenhüttenwes., 1984, vol. 55 (5), pp. 201–08.10.1002/srin.198405437 ↗
5. H.T. Abuluwefa, R.I.L. Guthrie, and F. Ajersch: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1633–41 and 1643–51.10.1007/s11661-997-0255-7 ↗
6. V.H.J. Lee, B. Gleeson, and D.J. Young: Oxid. Met., 2005, vol. 63, pp. 15–31.10.1007/s11085-005-1949-0 ↗
7. R.Y. Chen and W.Y.D. Yuen: Oxidation of Metals, 2009, in press.
8. R.Y. Chen and W.Y.D. Yuen: BlueScope Steel Research, Port Kembla, NSW, Australia, unpublished research, 2009.
9. R.Y. Chen and W.Y.D. Yuen: Oxid. Met., 2003, vol. 59, pp. 433–68.10.1023/A:1023685905159 ↗
10. R.Y. Chen and W.Y.D. Yuen: Mater. Sci. Forum, 2006, vol. 522–523, pp. 77–85.10.4028/www.scientific.net/MSF.522-523.77 ↗
11. D. R. Gaskell: Introduction to Metallurgical Thermodynamics, 2nd ed., Taylor & Francis, London, 1981.
12. N. Birks, G.H. Meier, and F.S. Pettit: Introduction to the High-Temperature Oxidation of Metals, 2nd ed., Cambridge University Press, Cambridge, United Kingdom, 2006.10.1017/CBO9781139163903 ↗
13. O. Kubaschewski and C.B. Alcock: Metallurgical Thermochemistry, 5th ed., Pergamon Press, Oxford, United Kingdom, 1979.
14. R.Y. Chen and W.Y.D. Yuen: Oxid. Met. 2008, vol. 70, pp. 39–68.10.1007/s11085-008-9111-4 ↗
15. F. Pettit, R. Yinger, and J.B. Wagner, Jr.: Acta Metall. 1960, vol. 8, pp. 617–23.10.1016/0001-6160(60)90016-X ↗
16. W.W. Smeltzer: Acta Metall., vol. 8, pp. 377–83.10.1016/0001-6160(60)90006-7 ↗
17. W.W. Smeltzer: Trans. TMS-AIME, 1960, vol. 218, pp. 674–81.
18. E.T. Turkdogan, W.M. McKewan, and L. Zwell: J. Phys. Chem., 1965, vol. 69, pp. 327–34.10.1021/j100885a052 ↗
19. H.J. Grabke and H. Viefhaus: Mater. Sci. Monographs (React. Solids), 1982, vol. 10, p. 410.
20. A. Galerie, Y. Wouters, and M. Caillet: Mater. Sci. Forum, 2001, vols. 369–372, pp. 231–38.10.4028/www.scientific.net/MSF.369-372.231 ↗
21. R. Bredesen and P. Kofstad: Oxid. Met., 1991, vol. 35, pp. 107–37.10.1007/BF00666503 ↗
22. F.A. Kröger and H.J. Vink: Solid State Phys., 1956, vol. 3, p. 307.10.1016/S0081-1947(08)60135-6 ↗
23. W.W. Smeltzer, L.A. Morris, and R.C. Logani: Can. Metall. Q., 1970, vol. 9, pp. 513–19.10.1179/cmq.1970.9.4.513 ↗
24. L.A. Morris and W.W. Smeltzer: Acta Metall., 1967, vol. 15, pp. 1591–96.10.1016/0001-6160(67)90132-0 ↗
25. H.-J. Grabke, K.J. Best, and A. Gala: Werkst. U. Korrosion, 1970, vol. 21, pp. 911–16.10.1002/maco.19700211106 ↗
26. F.S. Pettit and J.B. Wagner, Jr.: Acta Metall. 1964, vol. 12, pp. 35–40.10.1016/0001-6160(64)90051-3 ↗
27. M.H. Davies, M.T. Simnad, and C.E. Birchenall: Trans. AIME, 1951, vol. 191, pp. 889–96; 1953, vol. 193, p. 1250.
28. N.G. Schmahl, H. Baumann, and H. Schenck: Arch. Eisenhüttenwes, 1958, vol. 29, pp. 83–88.10.1002/srin.195802678 ↗
29. R. Bredesen and P. Kofstad: Oxid. Met., 1991, vol. 36, pp. 27–56.10.1007/BF00938455 ↗
30. R. Bredesen and P. Kofstad: Oxid. Met., 1990, vol. 34, pp. 361–79.10.1007/BF00664422 ↗
31. R.Y. Chen and W.Y.D. Yuen: BlueScope Steel Research, Port Kembla, NSW, Australia, unpublished research, 2009.
32. C. Wagner: Atom Movements, ASM, Cleveland, OH, 1951, pp. 153–73.
33. D.J. Young: High Temperature Oxidation and Corrosion of Metals, Elsevier Corrosion Series, 1st ed., Elsevier, Amsterdam, 2008, pp. 93–104.
34. W.W. Smeltzer and D.J. Young: Prog. Solid State Chem., 1975, vol. 10, pp. 17–54.10.1016/0079-6786(75)90003-5 ↗
35. L. Himmel, R.F. Mehl, and C.E. Birchenall: Trans. AIME, 1953, vol. 5, pp. 827–43.
36. W.K. Chen and N.L. Peterson: J. Phys. Chem. Solids, 1975, vol. 36, p. 1097.10.1016/0022-3697(75)90052-9 ↗
37. R.D. Shaw and R. Rolls: Corros. Sci., 1974, vol. 14, pp. 443–50.10.1016/0010-938X(74)90004-3 ↗
38. G. Garnaud and R.A. Rapp: Oxid. Met., 1977, vol. 11, pp. 193–98.10.1007/BF00606543 ↗
39. S. Mrowec: Defects and Diffusion in Solids—An Introduction, Elsevier Scientific Publishing Company, Amsterdam, The Netherlands, 1980, pp. 229–35 and 241–44.
40. B. Schmid, N. Aas, Ø. Grong, and R. Ødegård: Oxid. Met., 2002, vol. 57, pp. 115–30.10.1023/A:1013346813454 ↗
41. R.A. Rapp: Metall. Trans. A, 1984, vol. 15A, pp. 765–82.10.1007/BF02644552 ↗
42. T.L. Jungling and R.A. Rapp: Metall. Trans. A, 1984, vol. 15A, pp. 2231–40.10.1007/BF02647106 ↗
43. L.E. Matson, H. Erhart, M. Lee, and R.A. Rapp: Metall. Trans. A, 1984, vol. 15A, pp. 2241–46.10.1007/BF02647107 ↗
44. M. Lee and R.A. Rapp: Oxid. Met., 1987, vol. 27, pp. 187–95.10.1007/BF00667058 ↗
45. M. Lee and R.A. Rapp: Oxid. Met., 1988, vol. 30, pp. 125–38.10.1007/BF00656648 ↗
46. R.Y. Chen and W.Y.D. Yuen: Mater. Sci. Forum, 2006, vols. 522–523, pp. 451–59.10.4028/www.scientific.net/MSF.522-523.451 ↗