journal article·2013-07

Influence of Solute Content and Solidification Parameters on Grain Refinement of Aluminum Weld Metal

Philipp Schempp, Carl Edward Cross, Andreas Pittner, Michael Rethmeier

Publisher page

Abstract

Grain refinement provides an important possibility to enhance the mechanical properties (e.g., strength and ductility) and the weldability (susceptibility to solidification cracking) of aluminum weld metal. In the current study, a filler metal consisting of aluminum base metal and different amounts of commercial grain refiner Al Ti5B1 was produced. The filler metal was then deposited in the base metal and fused in a GTA welding process. Additions of titanium and boron reduced the weld metal mean grain size considerably and resulted in a transition from columnar to equiaxed grain shape (CET). In commercial pure aluminum (Alloy 1050A), the grain-refining efficiency was higher than that in the Al alloys 6082 and 5083. Different welding and solidification parameters influenced the grain size response only slightly. Furthermore, the observed grain-size reduction was analyzed by means of the undercooling parameter P and the growth restriction parameter Q, which revealed the influence of solute elements and nucleant particles on grain size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. F. Matsuda, K. Nakata, K. Tsukamoto and K. Arai: Trans. JWRI, 1983 vol. 12, pp. 253-62.
2. M.J. Dvornak, R.H. Frost and D.L. Olson: Weld. J., 1989, vol. 68, pp. 327-s–35-s.
3. M.G. Mousavi, C.E. Cross and Ø. Grong: Sci. Technol. Weld. Join., 1999, vol. 4, pp. 381-88.10.1179/136217199101538030 ↗
4. P. Schempp, C.E. Cross, C. Schwenk and M. Rethmeier: Weld. World, 2012, vol. 56, pp. 95-104.10.1007/BF03321385 ↗
5. J.A. Spittle and A.A. Cushway: Met. Technol., 1983, vol. 10, pp. 6-13.10.1179/030716983803291226 ↗
6. Y. Arata, F. Matsuda, S. Mukae and M. Katoh: Trans. JWRI, 1973, vol. 2, pp. 55-61.
7. G.D. Janaki Ram, T.K. Mitra, V. Shankar and S. Sundaresan: J. Mater. Proc. Technol., 2003, vol. 142, pp. 174–81.10.1016/S0924-0136(03)00574-0 ↗
8. P.C. Seshagiri, B.S. Nair, G.M. Reddy, K.S. Rao, S.S. Bhattacharya and K.P. Rao: Sci. Technol. Weld. Join., 2008, vol. 13, pp. 146-58.10.1179/174329308X283866 ↗
9. P. Schempp, C.E. Cross, A. Pittner, and M. Rethmeier: IIW-Doc. IX-2401-12, 65th Ann. Ass. Int. Conference IIW, Denver, CO, July 8–13, 2012.
10. AWS A5.10/A5.10M 1999(R2007).10.1201/9781420080636.bmatt4 ↗
11. M.A. Easton and D.H. StJohn: Acta Mater., 2001, vol. 49, pp. 1867-78.10.1016/S1359-6454(00)00368-2 ↗
12. F.A. Crossley and L.F. Mondolfo: Met. Trans. AIME, 1951, vol. 191, pp. 1143-48.
13. A. Cibula: J. Inst. Met., 1949, vol. 76, pp. 321 et seqq.
14. P.S. Mohanty and J.E. Gruzleski: Acta Metall. Mater., 1995, vol. 43, pp. 2001-12.10.1016/0956-7151(94)00405-7 ↗
15. A.M. Bunn, P.V. Evans, D.J. Bristow, and A.L. Greer: in Proc. 128th TMS Annual Meeting, San Diego, CA, Feb. 28–March 4, 1998, B.J. Welch, ed., TMS, Warrendale, PA, 1998, pp. 963–68.
16. W.A. Schneider, T.E. Quested, A.L. Greer, and P.S. Cooper: in Proc. 132nd TMS Annual Meeting, San Diego, CA, Mar. 2–6, 2003, P.N. Crepeau, ed., TMS, Warrendale, PA, 2003, pp. 953–59.
17. L.F. Mondolfo, S. Farooq, and C. Tse, ed.: Proc. 3rd Int. Conf. on Solid. Proc., Sheffield, July 1987, pp. 133–36.
18. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, 1974.10.1007/BF02643923 ↗
19. E. Scheil: Z. Metallk., 1942, vol. 34, pp. 70-72.
20. L. Bäckerud, E. Król, and J. Tamminen: Solidification Characteristics of Aluminium Alloys—Vol. 1: Wrought Alloys, Skanaluminium Universitetsforlaget AS, Oslo, 1986.
21. W.C. Winegard and B. Chalmers: Trans. Am. Soc. Met., 1954, vol. 46, pp. 1214-24.
22. D.G. McCartney: Int. Mater. Rev., 1989, vol. 34, pp. 247-60.10.1179/imr.1989.34.1.247 ↗
23. D. Altenpohl: Aluminium von innen betrachtet, 2nd ed., Aluminium-Verlag, Düsseldorf, Germany,1970.
24. M. Kato, F. Matsuda and T. Senda: Trans. Jpn. Weld. Soc., 1972, vol. 3, pp. 26-33.
25. Y. Arata, F. Matsuda and A. Matsui: Trans. JWRI, 1974, vol. 3, pp. 89-97.
26. J.W. Rutter and B. Chalmers: Can. J. Phys., 1953, vol. 31, pp. 15-39.10.1139/p53-003 ↗
27. L.A. Tarshis, J.L. Walker and J.W. Rutter: Metall. Trans., 1971, vol. 2, pp. 2589-97.10.1007/BF02814899 ↗
28. J.A. Spittle and S. Sadli: Mater. Sci. Technol., 1995, vol. 11, pp. 533-37.10.1179/026708395790165273 ↗
29. J. Moriceau: Rev. Alum., 1972, vol. 12, pp. 977-88.
30. I. Maxwell and A. Hellawell: Acta Metall., 1975, vol. 23, pp. 229-37.10.1016/0001-6160(75)90188-1 ↗
31. M. Easton and D. StJohn: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1613-23.10.1007/s11661-999-0098-5 ↗
32. L. Bäckerud and M. Johnsson: Proc. 125th TMS Annual Meeting, Anaheim, CA, Feb. 04–08, 1996, W. Hale, ed., TMS, Warrendale, PA, 1996, pp. 679–85.
33. J.D. Hunt: Mater. Sci. Eng., 1984, vol. 65, pp. 75-83.10.1016/0025-5416(84)90201-5 ↗
34. M. Rappaz and P. Thévoz: Acta metall., 1987, vol. 35, pp. 1487-97.10.1016/0001-6160(87)90094-0 ↗
35. G. Chai, L. Bäckerud and L. Arnberg: Mater. Sci. Technol., 1995, vol. 11, pp. 1099-103.10.1179/026708395790164535 ↗
36. M. Johnsson: Z. Metallkd., 1994, vol. 85, pp. 781-85.
37. M. Johnsson: Thermochim. Acta, 1995, vol. 256, pp. 107-21.10.1016/0040-6031(94)02167-M ↗
38. P. Desnain, Y. Fautrelle, J.-L. Meyer, J.-P. Riquet and F. Durand: Acta Metall. Mater., 1990, vol. 38, pp. 1513-23.10.1016/0956-7151(90)90119-2 ↗
39. M. Easton and D. StJohn: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1625-33.10.1007/s11661-999-0099-4 ↗
40. A.L. Greer, A.M. Bunn, A. Tronche, P.V. Evans and D.J. Bristow: Acta Mater., 2000, vol. 48, pp. 2823-35.10.1016/S1359-6454(00)00094-X ↗
41. M.A. Easton and D.H. StJohn: Proc. 130th TMS Annual Meeting, New Orleans, LA, Feb. 11–15, 2000, J.L. Anjier, ed., TMS, Warrendale, PA, 2001, pp. 927–33.
42. M. Easton and D. StJohn: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1911-20.10.1007/s11661-005-0054-y ↗
43. D.H. StJohn, M.A. Easton, P. Cao, and M. Qian: Proc. 5th Int. Conf. on Solid. Proc., Sheffield, July 2007, pp. 99–103.
44. W. Schneider, D.H. StJohn, and A.L. Greer: Proc. 11th Int. Conf. Alum. Alloys, Aachen, Germany, Sep. 22–26, 2008, vol. 1, pp. 383–92.
45. Y.C. Lee, A.K. Dahle, D.H. StJohn and J.E.C. Hutt: Mater. Sci. Eng., 1999, vol. 259, pp. 43-52.10.1016/S0921-5093(98)00884-3 ↗
46. M.A. Easton and D.H. StJohn: Mater. Sci. Eng. A, 2008, vol. 486A, pp. 8-13.10.1016/j.msea.2007.11.009 ↗
47. G.J. Davies and J.G. Garland: Int. Metall. Rev., 1975, vol. 20, pp. 83-106.10.1179/095066075790136943 ↗
48. W.A. Tiller and J.W. Rutter: Can. J. Phys., 1956, vol. 34, pp. 96-121.10.1139/p56-011 ↗
49. W.A. Tiller, K.A. Jackson, J.W. Rutter and B. Chalmers: Acta Metall., 1953, vol. 1, pp. 428-37.10.1016/0001-6160(53)90126-6 ↗
50. W.F. Savage, C.D. Lundin, and R.J. Hrubec: Weld. J., 1968, vol. 47, pp. 420-s–25-s.10.1016/0013-4694(68)90188-0 ↗
51. W.F. Savage: Weld. World, 1980, vol. 18, pp. 89-113.
52. S. Kou and Y. Le: Weld. J., 1986, vol. 65, pp. 305-s–13-s.
53. Ø. Grong and C.E. Cross: Proc. Mater. Res. Soc. Fall meeting, Boston, MA, 1999, vol. 578, pp. 431–38.10.1557/PROC-578-431 ↗
54. C.E. Cross, Ø. Grong and M. Mousavi: Scripta Mater., 1999, vol. 40, pp. 1139-44.10.1016/S1359-6462(99)00023-8 ↗
55. A. Gutierrez, J.C. Lippold: Weld. J., 1998, vol. 77, pp. 123-s - 132-s.
56. A. Kostrivas and J.C. Lippold: Weld. World, 2006, vol. 50, pp. 24-34.10.1007/BF03263458 ↗
57. P. Schempp, C.E. Cross, C. Schwenk and M. Rethmeier: Mater. Test., 2011, vol. 53, pp. 604-09.10.3139/120.110265 ↗
58. W. Hesse: Aluminium-Schlüssel, 2nd ed., Aluminium-Verlag, Düsseldorf, 2008 (in German).
59. ASTM E 112-96, 2004.
60. M.J. Dvornak, R.H. Frost, and D.L. Olson: Proc. Mater. Weldability Symp., Detroit, MI, Oct. 8–12, 1990, R.A. Patterson, ed., ASM International, Materials Park, OH, pp. 289–95.
61. S. Dev, A. Archibald Stuart, R.C. Ravi Dev Kumaar, B.S. Murty, and K. Prasad Rao: Mater. Sci. Eng. A, 2007, vol. 467A, pp. 132–38.10.1016/j.msea.2007.02.080 ↗
62. J.D. Schloz: Light Metal Age, 2010, vol. 4, pp. 30-37.
63. M. Johnsson and L. Bäckerud: Z. Metallkd., 1992, vol. 83, pp. 774-80.
64. A.L. Greer: Philos. Trans. R. Soc. Lond. A, 2003, vol. 361, pp. 479-95.10.1098/rsta.2002.1147 ↗
65. A.N. Turchin, M. Zuijderwijk, J. Pool, D.G. Eskin and L. Katgerman: Acta Mater., 2007, vol. 55, pp. 3795-801.10.1016/j.actamat.2007.02.030 ↗
66. S. Kou: Welding Metallurgy, 2nd ed., Wiley, Hoboken, NJ, 2003.10.1002/0471434027 ↗
67. W.F. Savage and A.H. Aronson: Weld. J., 1966, vol. 45, pp. 85-s - 89-s.
68. P. Schempp, Z. Tang, C.E. Cross, A. Pittner, T. Seefeld, and M. Rethmeier: Proc. 9th Int. Trends in Weld. Res. Conf., Chicago, IL, Jun. 4–8, 2012.
69. T. Ganaha, B.P. Pearce and H.W. Kerr: Metall. Trans. A, 1980, vol. 11A, pp. 1351-59.10.1007/BF02653489 ↗
70. S. Kou and Y. Le: Metall. Trans. A, 1988, vol. 19A, pp. 1075-82.10.1007/BF02628392 ↗
71. T.B. Massalski: Binary Phase Diagrams, 2nd ed., vol. 1, ASM International, Materials Park, OH, 1990.
72. L. Arnberg, L. Bäckerud and H. Klang: Met. Technol., 1982, vol. 9, pp. 7–13.10.1179/030716982803286368 ↗
73. P.A. Tøndel: Ph.D. Thesis, Norwegian Institute of Technology, Trondheim, Norway, 1994.
74. A.E. Karantzalis and A.R. Kennedy: Mater. Sci. Technol., 1998, vol. 14, pp. 1092-96.10.1179/026708398790708790 ↗
75. A. Tronche and A.L. Greer: Proc. 129th TMS Annual Meeting, Nashville, TN, Mar. 12–15, 2000, R.D. Peterson, ed., TMS, Warrendale, PA, 2000, pp. 827–32.
76. D.H. StJohn, M. Qian, M.A. Easton, P. Cao and Z. Hildebrand: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1669-79.10.1007/s11661-005-0030-6 ↗