journal article·2004-09

Shear localization-martensitic transformation interactions in Fe-Cr-Ni monocrystal

M. A. Meyers, V. F. Nesterenko, D. J. Benson, B. Y. Cao, Y. B. Xu

Publisher page

Abstract

A Fe-15 wt pet Cr-15 wt pet Ni alloy monocrystal was deformed dynamically (strain rate similar to10(4) s(-1)) by the collapse of an explosively driven thick-walled cylinder under prescribed initial temperature and strain conditions. The experiments were carried out under the following conditions: (a) alloy in austenitic state, temperature above transformation temperature; (b) alloy in transformed state; and (c) alloy at temperature slightly above g,, propitiating concurrent shear-band propagation and martensitic transformation. The alloy exhibited profuse shear-band formation, which was a sensitive function of the deformation condition. Stress-assisted and strain-induced martensitic transformation competes with shear localization. The alloy deformed at a temperature slightly above g, shows a significantly reduced number of shear bands. The anisotropy of plastic deformation determines the evolution of strains and distribution of shear bands. The different conditions showed significant differences that are interpreted in terms of the microstructural anisotropy. Calculated shear-band spacings based on the Grady-Kipp (GK) and Wright-Ockendon (WO) theories are compared with the observed values. The microstructure within the shear bands was characterized by transmission electron microscopy. Regions of sub-micron grain sizes exhibiting evidence of recrystallization were observed, as well as amorphous regions possibly resulting from melting and rapid resolidification.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. D. Peirce, R.J. Asaro, and A. Needleman: Acta Metall., 1983, vol. 31, pp. 1951–76.10.1016/0001-6160(83)90014-7 ↗
2. C.J. Shih, M.A. Meyers, and V.F. Nesterenko: Acta Mater., 1998, vol. 11, pp. 4037–65.10.1016/S1359-6454(98)00040-8 ↗
3. C.J. Shih, V.F. Nesterenko, and M.A. Meyers: J. Appl. Phys., 1998, vol. 83, pp. 4660–71.10.1063/1.367252 ↗
4. M.A. Meyers: Encyclopedia of Materials: Science and Technology, Elsevier, New York, NY, 2001, pp. 7093–103.10.1016/B0-08-043152-6/01257-2 ↗
5. V.F. Nesterenko, M.A. Meyers, and H.C. Chen: Acta Mater., 1996, vol. 44, pp. 2017–26.10.1016/1359-6454(95)00304-5 ↗
6. V.F. Nesterenko: Dynamics of Heterogeneous Materials, Springer-Verlag, New York, NY, 2001.10.1007/978-1-4757-3524-6 ↗
7. J.W. Rudinicki and J.R. Rice: J. Mech. Phys. Solids, 1975, vol. 23, pp. 371–94.10.1016/0022-5096(75)90001-0 ↗
8. H.C. Rogers: Ann. Rev. Mater. Sci. 1979, vol. 2, pp. 283–311.10.1146/annurev.ms.09.080179.001435 ↗
9. R.W. Armstrong, R. Batra, M.A. Meyers, and T.W. Wright: Mech. Mater., 1994, vol. 17, pp. 83–328.10.1016/0167-6636(94)90069-8 ↗
10. Y. Bai and B. Dodd: Adiabatic Shear Localization, Pergamon, Oxford, United Kingdom, 1992.
11. M.A. Meyers: Dynamic Behavior of Materials, Wiley, New York, NY, 1994.10.1002/9780470172278 ↗
12. T.W. Wright: The Physics and Mathematics of Adiabatic Shear Bands, Cambridge University Press, Cambridge, United Kingdom, 2002.
13. V.F. Nesterenko, M.A. Meyers, H.C. Chen, and J.C. LaSalvia: Appl. Phys. Lett., 1994, vol. 65, pp. 3069–71.10.1063/1.112509 ↗
14. V.F. Nesterenko, M.A. Meyers, J.C. LaSalvia, M.P. Bondar, Y.J. Chen, and Y.L. Lukyanov: Mater. Sci. Eng. A, 1997, vol. 229, pp. 23–41.10.1016/S0921-5093(96)10847-9 ↗
15. V.F. Nesterenko, M.A. Meyers, and T.W. Wright: Acta Mater., 1998, vol. 46, pp. 327–40.10.1016/S1359-6454(97)00151-1 ↗
16. G. Stone and G. Thomas: Metall. Trans., 1974, vol. 5, pp. 2095–2102.10.1007/BF02644503 ↗
17. J.R.C. Guimaraes, J.C. Gomes, and M.A. Meyers: Proc. 1st JIM Int. Symp., Kobe, Japan, May 1976, Suppl. Trans. JIM, 1976, vol. 17, pp. 411–17.
18. J.R. Patel and M. Cohen: Acta Metall., 1953, vol. 1, pp. 531–38.10.1016/0001-6160(53)90083-2 ↗
19. J.D. Eshelby: Proc. R. Soc., 1957, vol. A241, pp. 376–95.
20. J.D. Eshelby: Proc. R. Soc., 1959, vol. A252, pp. 561–69.
21. T. Mura: Micromechanics of Solids, Martinus Nijhoff, The Hague, 1982.10.1007/978-94-011-9306-1 ↗
22. L. Kaufman and M. Cohen: Progr. Met. Phys., 1958, vol. 7, pp. 165–200.10.1016/0502-8205(58)90005-4 ↗
23. Q. Xue, V.F. Nesterenko, and M.A. Meyers: Int. J. Impact Eng., 2003, vol. 28, pp. 257–80.10.1016/S0734-743X(02)00103-3 ↗
24. V.F. Nesterenko and M.P. Bondar: DYMAT J., 1994, vol. 1, p. 245.
25. D.A. Shockey: in Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena, L.E. Murr, K.P. Staudhammer, and M.A. Meyers, eds., 1986, pp. 633–56.
26. V.F. Nesterenko, M.A. Meyers, and T.W. Wright: Metallurgical and Materials Applications of Shock-Wave and High-Strain-Rate Phenomena, L.E. Murr, K.P. Staudhammer, and M.A. Meyers, eds., Elsevier Science, Oxford, United Kingdom, 1995, pp. 397–404.
27. V.F. Nesterenko, M.P. Bondar, and I.V. Ershov: High-Pressure Science and Technology, AIP Conf. Proc., 1993, S.C. Schmidt, ed., AIP Press, New York, NY, 1994, vol. 309, p. 1173.
28. M.A. Meyers and S.L. Wang: Acta Metall., 1988, vol. 36, pp. 925–36.10.1016/0001-6160(88)90147-2 ↗
29. J.E. Kennedy: Behavior and Utilization of Explosives in Engineering Design, 12th Ann. Symp., ASME, Albuquerque, NM, 1972.
30. D.E. Grady and M.E. Kipp: J. Mech. Phys. Solids, 1987, vol. 35, pp. 95–119.10.1016/0022-5096(87)90030-5 ↗
31. T.W. Wright and H. Ockendon: Int. J. Plasticity, 1996, vol. 12, pp. 927–34.10.1016/S0749-6419(96)00034-4 ↗
32. A. Molinari: J. Mech. Phys. Solids, 1997, vol. 45, pp. 1551–75.10.1016/S0022-5096(97)00012-4 ↗
33. S. Nemat-Nasser, T. Okinada, V. F. Nesterenko, and M. Liu: Phil. Mag., 1998, vol. 78, pp. 1151–74.10.1080/014186198253174 ↗
34. M.A. Meyers, Y.B. Xu, Q. Xue, M.T. Perez-Prado, and T.R. McNelley: Acta Mater., 2003, vol. 51, pp. 1307–25.10.1016/S1359-6454(02)00526-8 ↗
35. T.J. Barbee, B.E. Jacobsen, and D.L. Keith: Thin Solid Films, 1979, vol. 63, pp. 143–50.10.1016/0040-6090(79)90115-9 ↗
36. B.Y. Cao, M.A. Meyers, V.F. Nesterenko, D. Benson, and Y.B. Xu: 13th Am. Physical Society Topical Conf. on Shock Compression of Condensed Matter, 2003.
37. G.R. Johnson and W.H. Cook: Paper presented at the 7th Int. Symp. on Ballistics, The Hague, 1983.
38. D.J. Benson: RAVEN: User’s Manual ver 2000.
39. D.J. Benson: Comp. Meth. Appl. Mech. Eng., 1992, vol. 99, p. 235.10.1016/0045-7825(92)90042-I ↗
40. M.A. Meyers, D.J. Benson, and E.A. Olevsky: Acta Mater., 1999, vol. 47 (7), pp. 2089–2108.10.1016/S1359-6454(99)00083-X ↗
41. B.M. Dobratz: Explosives Handbook: Properties of Chemical Explosives and Explosives Simulants. UCRL-52997, Livermore National Laboratory, Livermore, CA, 1981.10.2172/6530310 ↗