journal article·2014-07

Powder-Route Synthesis and Mechanical Testing of Ultrafine Grain Tungsten Alloys

Zachary C. Cordero, Emily L. Huskins, Mansoo Park, Steven Livers, Megan Frary, Brian E. Schuster, Christopher A. Schuh

Publisher page

Abstract

We report a W-rich alloy (W-7Cr-9Fe, at. pct) produced by high-energy ball milling, with alloying additions that both lower the densification temperature and retard grain growth. The alloy’s consolidation behavior and the resultant compacts’ microstructure and mechanical properties are explored. Under one condition, a 98 pct dense compact with a mean grain size of 130 nm was achieved, and exhibited a hardness of 13.5 GPa, a dynamic uniaxial yield strength of 4.14 GPa in Kolsky bar experiments, and signs of structural shear localization during deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. B.E. Schuster, J.P. Ligda, Z.L. Pan, and Q. Wei: JOM, 2011, vol. 63, pp. 27–31.10.1007/s11837-011-0202-3 ↗
2. Q. Wei, K.T. Ramesh, B.E. Schuster, L.J. Kecskes, and R.J. Dowding: JOM, 2006, vol. 58, pp. 40–44.10.1007/s11837-006-0081-1 ↗
3. D.B. Snow: Metall. Trans. A, 1976, vol. 7, pp. 783–94.10.1007/BF02644074 ↗
4. D.B. Snow: Metall. Trans. A, 1979, vol. 10, pp. 815–21.10.1007/BF02658299 ↗
5. E.S. Meieran and D.A. Thomas: Trans Met Soc AIME, 1965, vol. 233, pp. 937–43.
6. L.J. Kecskes, K.C. Cho, R.J. Dowding, B.E. Schuster, R.Z. Valiev, and Q. Wei: Mater. Sci. Eng. A, 2007, vol. 467, pp. 33–43.10.1016/j.msea.2007.02.099 ↗
7. Q. Wei, H.T. Zhang, B.E. Schuster, K.T. Ramesh, R.Z. Valiev, L.J. Kecskes, R.J. Dowding, L.S. Magness Jr., and K. Cho: Acta Mater., 2006, vol. 54, pp. 4079–89.10.1016/j.actamat.2006.05.005 ↗
8. A.P. Zhilyaev and T.G. Langdon: Prog. Mater. Sci., 2008, vol. 53, pp. 893–979.10.1016/j.pmatsci.2008.03.002 ↗
9. L.S. Magness Jr.: Mech. Mater., 1994, vol. 17, pp. 147–54.10.1016/0167-6636(94)90055-8 ↗
10. Q. Wei, L.J. Kecskes, and K.T. Ramesh: Mater. Sci. Eng. A, 2013, vol. 578, pp. 394–401.10.1016/j.msea.2013.04.109 ↗
11. Q. Wei, T. Jiao, K.T. Ramesh, E. Ma, L.J. Kecskes, L.S. Magness, R.J. Dowding, V.U. Kazykhanov, and R.Z. Valiev: Acta Mater., 2006, vol. 54, pp. 77–87.
12. A.K. Srivastav and B.S. Murty: J. Alloys Compd., 2012, vol. 536, Supplement 1, pp. S41–S44.10.1016/j.jallcom.2011.12.067 ↗
13. E. Oda, K. Ameyama, and S. Yamaguchi: Mater. Sci. Forum, 2006, vol. 503-504, pp. 573–78.10.4028/www.scientific.net/MSF.503-504.573 ↗
14. H. Wang, Z.Z. Fang, K.S. Hwang, H. Zhang, and D. Siddle: Int. J. Refract. Met. Hard Mater., 2010, vol. 28, pp. 312–16.10.1016/j.ijrmhm.2009.11.003 ↗
15. R. Sarkar, P. Ghosal, M. Premkumar, A.K. Singh, K. Muraleedharan, A. Chakraborti, T.P. Bagchi, and B. Sarma: Powder Metall., 2008, vol. 51, pp. 166–70.10.1179/174329008X284787 ↗
16. T.S. Srivatsan, K. Manigandan, M. Petraroli, R.M. Trejo, and T.S. Sudarshan: Adv. Powder Technol., 2013, vol. 24, pp. 190–99.10.1016/j.apt.2012.05.008 ↗
17. B.R. Klotz, F.R. Kellogg, E.M. Klier, R.J. Dowding, and K.C. Cho: Characterization, Processing, and Consolidation of Nanoscale Tungsten Powder, Army Research Laboratory, 2009.10.21236/ADA538261 ↗
18. K.C. Cho, R.H. Woodman, B.R. Klotz, and R.J. Dowding: Mater. Manuf. Process., 2004, vol. 19, pp. 619–30.10.1081/AMP-200028077 ↗
19. O. El-Atwani, D.V. Quach, M. Efe, P.R. Cantwell, B. Heim, B. Schultz, E.A. Stach, J.R. Groza, and J.P. Allain: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5670–77.10.1016/j.msea.2011.04.015 ↗
20. U.K. Vashi, R.W. Armstrong, and G.E. Zima: Metall. Trans., 1970, vol. 1, pp. 1769–71.10.1007/BF02642027 ↗
21. C. Agte and J. Vacek: Tungsten and Molybdenum, NASA Trans., 1963.
22. H.H. Tian and M. Atzmon: Philos. Mag. A, 1999, vol. 79, pp. 1769–86.10.1080/01418619908210391 ↗
23. ASTM Standard E562-11: Test Method for Determining Volume Fraction by Systematic Manual Point Count, vol. 03.01, Annual Book of ASTM Standards, ASTM International, Materials Park, OH, 2011.
24. ASTM Standard E1245-03: Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis, vol. 03.01, Annual Book of ASTM Standards, ASTM International, Materials Park, OH, 2008.
25. ASTM Standard E112-12: Test Methods for Determining Average Grain Size, vol. 03.01, Annual Book of ASTM Standards, ASTM International, Materials Park, OH, 2012.
26. W.C. Oliver and G.M. Pharr: J. Mater. Res., 2004, vol. 19, pp. 3–20.10.1557/jmr.2004.19.1.3 ↗
27. ASM Handbook: Properties and Selection: Nonferrous Alloys and Special Purpose Materials, Vol. 2, ASM International, Metals Park, OH, 1990.10.31399/asm.hb.v02.9781627081627 ↗
28. M.D. Uchic, D.M. Dimiduk, J.N. Florando, and W.D. Nix: Science, 2004, vol. 305, pp. 986–89.10.1126/science.1098993 ↗
29. W.W. Chen and B. Song: Split Hopkinson (Kolsky) Bar Design, Testing and Applications, Springer, New York, NY, 2011.10.1007/978-1-4419-7982-7 ↗
30. T.H. Courtney and Z. Wang: Scr. Metall. Mater., 1992, vol. 27, pp. 777–82.10.1016/0956-716X(92)90505-9 ↗
31. P. Gustafson: Metall. Trans. A, 1988, vol. 19, pp. 2531–46.10.1007/BF02645481 ↗
32. S. Telu, A. Patra, M. Sankaranarayana, R. Mitra, and S.K. Pabi: Int. J. Refract. Met. Hard Mater., 2013, vol. 36, pp. 191–203.10.1016/j.ijrmhm.2012.08.015 ↗
33. M.S. El-Eskandarany, K. Sumiyama, and K. Suzuki: Acta Mater., 1997, vol. 45, pp. 1175–87.10.1016/S1359-6454(96)00205-4 ↗
34. C.N.J. Wagner, E. Yang, and M.S. Boldrick: Nanostructured Mater., 1996, vol. 7, pp. 1–11.10.1016/0965-9773(95)00296-0 ↗
35. H.J. Fecht, E. Hellstern, Z. Fu, and W.L. Johnson: Metall. Trans. A, 1990, vol. 21, pp. 2333–37.10.1007/BF02646980 ↗
36. R. Malewar, K.S. Kumar, B.S. Murty, B. Sarma, and S.K. Pabi: J. Mater. Res., 2007, vol. 22, pp. 1200–06.10.1557/jmr.2007.0166 ↗
37. A.O. Aning, Z. Wang, and T.H. Courtney: Acta Metall. Mater., 1993, vol. 41, pp. 165–74.10.1016/0956-7151(93)90348-V ↗
38. D. Oleszak and P.H. Shingu: J. Appl. Phys., 1996, vol. 79, pp. 2975–80.10.1063/1.361294 ↗
39. D.P. Xiang, L. Ding, Y.Y. Li, J.B. Li, X.Q. Li, and C. Li: Mater. Sci. Eng. A, 2012, vol. 551, pp. 95–99.10.1016/j.msea.2012.04.099 ↗
40. U. Herr and K. Samwer: Nanostructured Mater., 1992, vol. 1, pp. 515–21.10.1016/0965-9773(92)90084-B ↗
41. J.O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: CALPHAD, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
42. T. Chookajorn, H.A. Murdoch, and C.A. Schuh: Science, 2012, vol. 337, pp. 951–54.10.1126/science.1224737 ↗
43. D. Peckner: The Strengthening of Metals, Reinhold, New York, 1964, pp. 93–139.
44. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 3rd ed., Wiley, New York, NY, 1996, pp. 8.
45. C.S. Barrett and T.B. Massalski: Structure of Metals, 3rd ed., McGraw-Hill, New York, NY, 1966, pp. 626–31.
46. T.J. Rupert, J.C. Trenkle, and C.A. Schuh: Acta Mater., 2011, vol. 59, pp. 1619–31.10.1016/j.actamat.2010.11.026 ↗
47. H.C. Lee and J. Gurland: Mater. Sci. Eng., 1978, vol. 33, pp. 125–33.10.1016/0025-5416(78)90163-5 ↗
48. E. Underwood: Quantitative Stereology, Addison-Wesley Publishing Co., Reading, MA, 1970, pp. 99-103.
49. Z. Fan, A. P. Miodownik, and P. Tsakiropoulos: Mater. Sci. Technol., 1993, vol. 9, pp. 1094–1100.10.1179/mst.1993.9.12.1094 ↗
50. H. Zhang, B.E. Schuster, Q. Wei, and K.T. Ramesh: Scr. Mater., 2006, vol. 54, pp. 181–86.10.1016/j.scriptamat.2005.06.043 ↗
51. B. Butler, E. Klier, D. Casem, A. Dwivedi, M. Gallagher, and J. Hays: Demonstration of Shear Localization in Ultrafine Grained Tungsten Alloys via Powder Metallurgy Processing Route, Army Research Laboratory, 2012.
52. A.M. Lennon and K.T. Ramesh: Mater. Sci. Eng. A, 2000, vol. 276, pp. 9–21.10.1016/S0921-5093(99)00517-1 ↗
53. Q. Wei, K.T. Ramesh, E. Ma, L.J. Kesckes, R.J. Dowding, V.U. Kazykhanov, and R.Z. Valiev: Appl. Phys. Lett., 2005, vol. 86, pp. 101907–101909.10.1063/1.1875754 ↗
54. D. Jia, K.T. Ramesh, and E. Ma: Acta Mater., 2003, vol. 51, pp. 3495–3509.10.1016/S1359-6454(03)00169-1 ↗
55. J.P. Ligda, B.E. Schuster, and Q. Wei: Scr. Mater., 2012, vol. 67, pp. 253–56.10.1016/j.scriptamat.2012.04.031 ↗
56. J.E. Carsley, A. Fisher, W.W. Milligan, and E.C. Aifantis: Metall. Mater. Trans. A, 1998, vol. 29, pp. 2261–71.10.1007/s11661-998-0104-3 ↗
57. S.P. Joshi and K.T. Ramesh: Acta Mater., 2008, vol. 56, pp. 282–91.10.1016/j.actamat.2007.09.031 ↗
58. S.P. Joshi and K.T. Ramesh: Mater. Sci. Eng. A, 2008, vol. 493, pp. 65–70.10.1016/j.msea.2007.06.094 ↗