Mechanical Properties and Fracture Behavior of Directionally Solidified NiAl-V Eutectic Composites
Source abstract
Abstract
Directional solidification of eutectic alloys has been recognized as promising technique for producing in situ composite materials exhibiting balance of properties. Therefore, an in situ NiAl-V eutectic composite has been successfully directionally solidified using Bridgman technique. The mechanical behavior of the composite including fracture resistance, microhardness, and compressive properties at room and elevated temperatures was investigated. Damage evolution and fracture characteristics were also discussed. The obtained results indicate that the NiAl-V eutectic retains high yield strength up to 1073 K (800 °C), above which there is a rapid decrease in strength. Its yield strength is higher than that of binary NiAl and most of the NiAl-based eutectics. The exhibited fracture toughness of 28.5 MPa√m is the highest of all other NiAl-based systems investigated so far. The material exhibited brittle fracture behavior of transgranular type and all observations pointed out that the main fracture micromechanism was cleavage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. D.B. Miracle: Acta Metall. Mater., 1993, Vol. 41, pp. 649–84.10.1016/0956-7151(93)90001-9 ↗
2. R.D. Noebe, R.R. Bowman, M. Nathal: Int. Mater. Rev., 1993, Vol. 38, pp.193–231.10.1179/imr.1993.38.4.193 ↗
3. A. Misra and R. Gibala: Metall Mater. Trans. A, 1997, Vol. 28A, pp. 795–807.
4. M.G. Mendiratta, J.J. Levandowski, D.M. Dimiduk: Metall. Trans. A, 1991, Vol. 22A, pp. 1573–83.10.1007/BF02667370 ↗
5. G. Frommeyer, R. Rosenkranz, C. Ludecke: Zeit. Metallkd., 1991, Vol. 81, pp. 307–13.
6. J.D. Whittenberger, R.D. Noebe, D.R. Johnson, B.F. Oliver: Intermetallics, 1997, Vol. 5, pp. 173–83.10.1016/S0966-9795(96)00078-7 ↗
7. D.T. Jiang and J.T. Guo. Mater. Sci. Eng. A 225 (1998), p. 154.10.1016/S0921-5093(98)00671-6 ↗
8. J.T. Guo, C.Y. Cui, Y.X. Chen, D.X. Li and H.Q. Ye. Intermetallics, 2001, Vol. 9, pp. 287–97.10.1016/S0966-9795(01)00009-7 ↗
9. F.E. Heredia, M.Y. He, G.E. Lucas, A.G. Evans and H.E. Dève. Acta Metall. Mater., 1993, Vol. 41, pp. 505–11.10.1016/0956-7151(93)90079-8 ↗
10. P.R. Subramanian, M.G. Mendiratta and D.B. Miracle. Metall. Mater. Trans. A 25A (1994), p. 2769-81.10.1007/BF02649228 ↗
11. A. Misra, R. Gibala and R.D. Noebe: Intermetallics, 2001, Vol. 9, pp. 971–8.10.1016/S0966-9795(01)00098-X ↗
12. C.Y. Cui, J.T. Guo, Y.H. Qi, H.Q. Ye. Mater. Sci. Eng. A, 2004, Vol. 385, pp. 359–66.10.1016/j.msea.2004.06.065 ↗
13. H. Bei and E.P. George. Acta Mater., 2005, Vol. 53, pp. 69–77.10.1016/j.actamat.2004.09.003 ↗
14. B. Zeumert, G. Sauthoff. Intermetallics, 1997, Vol. 5, pp. 563–77.10.1016/S0966-9795(97)00031-9 ↗
15. P.L. Ferrandini, F.L.G.U. Araujo, W.W. Batista, R. Caram. J. Cryst. Growth, 2005, Vol. 275, pp. 147–52.10.1016/j.jcrysgro.2004.10.101 ↗
16. P.W. Pellegrini, J.J. Huta., J. Cryst. Growth, 1977, Vol. 42, pp. 536–39.10.1016/0022-0248(77)90242-1 ↗
17. J.D. Cotton, M.J. Kaufman: Scripta Metall. Mater., 1991, Vol. 25, pp. 1827–36.10.1016/0956-716X(91)90312-O ↗
18. S.M. Joslin, X.F. Chen, B.F. Oliver, R.D. Noebe: Mater. Sci. Eng. A, 1995, Vol. 196, pp. 9–18.10.1016/0921-5093(94)09683-X ↗
19. S. Milenkovic, A.A. Coelho, R. Caram: J. Cryst. Growth, 2000, Vol. 211, pp. 485–90.10.1016/S0022-0248(99)00783-6 ↗
20. S. Milenkovic, R. Caram: Mater. Lett., 2002, Vol. 55, pp. 126–31.10.1016/S0167-577X(01)00634-6 ↗
21. S. Milenkovic, R. Caram: J. Mater. Proc. Technol., 2003, Vol. 143–144, pp. 629–35.10.1016/S0924-0136(03)00449-7 ↗
22. J.D. Hunt, K.A. Jackson, Trans. Met. Soc. AIME, 1966, Vol. 236, pp. 843–52.
23. J.D. Hunt, J.P. Chilton, J. Inst. Met., 1962, Vol. 91, pp. 338–45.
24. R. Darolia, J. Met., 1991, Vol.43, pp.44–49.
25. J.L. Walter and H.E. Cline: Metall. Trans., 1970, vol. 1, pp. 1221–29.10.1007/BF02900234 ↗
26. G. Frommeyer and R. Rablbauer, MRS Proc., 2002, vol. 753, BB4.6.10.1557/PROC-753-BB4.6 ↗
27. D.R. Johnson, S.M. Joslin, B.F. Oliver, R.D. Noebe, J.D. Whittenberger, Intermetallics, Vol. 3, pp. 99–113, 1995.10.1016/0966-9795(95)92674-O ↗
28. P.R. Subramanian, M.G. Mendiratta, D.B. Miracle, and D.M. Dimiduk: in MRS Symposium on Intermetallic Matrix Composites II, 1990, vol. 194, pp. 147–54.10.1557/PROC-194-147 ↗
29. Annual Book of ASTM Standards: “Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials”: E-399-90, ASTM, Philadelphia, PA, 1991, vol. 03.01, p. 485.
30. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Solids, 4th ed. New York: Wiley, 1996, pp. 164-201.