Achieving Superior Strength and Ductility in Ti-6Al-4V Recycled from Machining Chips by Equal Channel Angular Pressing
Source abstract
Abstract
Ti-6Al-4V machining chips were recycled using equal channel angular pressing. The as-recycled material was fully dense and well bonded, but contained chip boundaries decorated by entrapped surface oxide, giving rise to brittleness in tensile loading. Annealing at high temperatures was effective in removing the oxide. The times required for completely dissolving the oxide layers were calculated using models based on oxygen diffusion in alpha- and beta-Ti, respectively. It is shown that the oxide dissolution is rapid, taking from several minutes to less than one second at temperatures between 973 K and 1323 K (700 A degrees C and 1050 A degrees C) for thicknesses of up to 1 mu m. In addition, bands of grains finer than those in the matrix occurred in the vicinity of the prior chip boundaries, caused by the enhanced level of oxygen diffusing away from the dissolving oxide which hindered local grain growth. It would take hours of annealing to homogenize the grain size and composition. The as-recycled material was subjected to conventional mill-annealing, leading to a finer microstructure with superior yield strength (similar to 1150 MPa) and equivalent tensile ductility (similar to 25 pct), compared to a commercial mill-annealed Ti-6Al-4V.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. T. Aizawa, K. Halada and T.G. Gutowski, Mater. Trans., JIM, 2002, vol. 43, pp. 390-96.10.2320/matertrans.43.390 ↗
2. Y. Chino, T. Hoshika, J.S. Lee and M. Mabuchi, J. Mater. Res., 2006, vol. 21, pp. 754-60.10.1557/jmr.2006.0090 ↗
3. M. Mabuchi, K. Kubota and K. Higashi, Mater. Trans. JIM, 1995, vol. 36, pp. 1249-54.10.2320/matertrans1989.36.1249 ↗
4. Y. Chino, M. Mabuchi, S. Otsuka, K. Shimojima, H. Hosokawa, Y. Yamada, C. Wen and H. Iwasaki, Mater. Trans. JIM, 2003, vol. 44, pp. 1284-89.10.2320/matertrans.44.1284 ↗
5. J. Gronostajski, H. Marciniak and A. Matuszak, J. Mater. Process. Technol., 2000, vol. 106, pp. 34-39.10.1016/S0924-0136(00)00634-8 ↗
6. Y. Chino, H. Iwasaki and M. Mabuchi, J. Mater. Res., 2004, vol. 19, pp. 1524-30.10.1557/JMR.2004.0204 ↗
7. P. Luo, H. Xie, M. Paladugu, S. Palanisamy, M.S. Dargusch and K. Xia, J. Mater. Sci., 2010, vol. 45, pp. 4606-12.10.1007/s10853-010-4443-2 ↗
8. P. Luo, D.T. McDonald, W. Xu, S. Palanisamy, M.S. Dargusch and K. Xia, Scripta Mater., 2012, vol. 66, pp. 785-88.10.1016/j.scriptamat.2012.02.008 ↗
9. P. Luo, D.T. McDonald, S.M. Zhu, S. Palanisamy, M.S. Dargusch and K. Xia, Mater. Sci. Eng. A, 2012, vol. 538, pp. 252-58.10.1016/j.msea.2012.01.039 ↗
10. D.T. McDonald, P. Luo, S. Palanisamy, M.S. Dargusch and K. Xia, Key Eng. Mater., 2012, vol. 520, pp. 295-300.10.4028/www.scientific.net/KEM.520.295 ↗
11. P. Luo, D.T. McDonald, S. Palanisamy, M.S. Dargusch and K. Xia, J. Mater. Process. Technol., 2013, vol. 213, pp. 469-76.10.1016/j.jmatprotec.2012.10.016 ↗
12. T. Watanabe and Y. Horikoshi, Int. J. Powder Metall., 1976, vol. 12, pp. 209-14.
13. D. Velten, V. Biehl, F. Aubertin, B. Valeske, W. Possart and J. Breme, J. Biomed. Mater. Res., 2002, vol. 59, pp. 18-28.10.1002/jbm.1212 ↗
14. A.E. Jenkins, J. Inst. Met., 1954, vol. 82, pp. 213-21.
15. H. Dong and X.Y. Li, Mater. Sci. Eng. A, 2000, vol. 280, pp. 303-10.10.1016/S0921-5093(99)00697-8 ↗
16. I. Vaquila, M.C.G. Passeggi and J. Ferron, Appl. Surf. Sci., 1996, vol. 93, pp. 247-53.10.1016/0169-4332(95)00334-7 ↗
17. Y. Mizuno, F.K. King, Y. Yamauchi, T. Homma, A. Tanaka, Y. Takakuwa and T. Momose, J. Vac. Sci. Technol. A, 2002, vol. 20, pp. 1716-21.10.1116/1.1500746 ↗
18. P. Kofstad, K. Hauffe and H. Kjollesdal, Acta Chem. Scand., 1958, vol. 12, pp. 239-66.10.3891/acta.chem.scand.12-0239 ↗
19. J.L. Murray and H.A. Wriedt, J. Phase Equilib., 1987, vol. 8, pp. 148-65.10.1007/BF02873201 ↗
20. Y. Takahashi, T. Nakamura and K. Nishiguchi, J. Mater. Sci., 1992, vol. 27, pp. 485-98.10.1007/BF00543942 ↗
21. G. Lütjering and J.C. Williams: Titanium, 2 nd ed., Springer, Berlin, 2007, pp. 203-58.
22. C. Leyens and M. Peters: Titanium and Titanium Alloys, Wiley-VCH: Weinheim, 2003, pp 1-36.10.1002/3527602119 ↗
23. K. Xia and J. Wang, Metall. Mater. Trans. A, 2001, vol. 32, pp. 2639-47.10.1007/s11661-001-0054-5 ↗
24. K. Xia, Adv. Eng. Mater., 2010, vol. 12, pp. 724-29.10.1002/adem.200900332 ↗
25. Z. Liu and G. Welsch, Metall. Trans. A, 1988, vol. 19, pp. 1121-24.10.1007/BF02628396 ↗
26. F.J. Gil, C. Aparicio and J.A. Planell, J. Mater. Synth. Process, 2002, vol. 10, pp. 263-66.10.1023/A:1023094126132 ↗
27. J.W. Cahn, Acta Metall., 1962, vol. 10, pp. 789-98.10.1016/0001-6160(62)90092-5 ↗
28. H. Mehrer: Diffusion in Solids: Fundamentals, Methods, Materials, Diffusion-Controlled Processes, Springer, Berlin, 2007, pp. 37–53.10.1007/978-3-540-71488-0 ↗
29. I. Weiss, F.H. Froes, D. Eylon and G.E. Welsch, Metall. Trans. A, 1986, vol. 17, pp. 1935-47.10.1007/BF02644991 ↗
30. S.L. Semiatin, V. Seetharaman and I. Weiss, Mater. Sci. Eng. A, 1999, vol. 263, pp. 257-71.10.1016/S0921-5093(98)01156-3 ↗
31. N. Stefansson and S.L. Semiatin, Metall. Mater. Trans. A, 2003, vol. 34A, pp. 691-98.10.1007/s11661-003-0103-3 ↗
32. S. Zherebtsov, M. Murzinova, G. Salishchev and S.L. Semiatin, Acta Mater., 2011, vol. 59, pp. 4138-50.10.1016/j.actamat.2011.03.037 ↗
33. S.M. Kim, J. Kim, D.H. Shin, Y.G. Ko, C.S. Lee and S.L. Semiatin, Scripta Mater., 2004, vol. 50, pp. 927-30.10.1016/j.scriptamat.2004.01.020 ↗
34. D.M. Dimiduk, P.M. Hazzledine, T.A. Parthasarathy, S. Seshagiri and M.G. Mendiratta, Metall. Mater. Trans. A, 1998, vol. 29A, pp. 37-47.10.1007/s11661-998-0157-3 ↗
35. M.A. Meyers, A. Mishra and D.J. Benson, Prog. Mater. Sci., 2006, vol. 51, pp. 427-556.10.1016/j.pmatsci.2005.08.003 ↗
36. J.M. Oh, B.G. Lee, S.W. Cho, S.W. Lee, G.S. Choi and J.W. Lim, Met. Mater. Int., 2011, vol. 17, pp. 733-36.10.1007/s12540-011-1006-2 ↗