journal article·2010-03Open access

Connectivity of Phases and Growth Mechanisms in Peritectic Alloys Solidified at Low Speed: an X-Ray Tomography Study of Cu-Sn

M. Rappaz, F. Kohler, J. Valloton, A.B. Phillion, M. Stampanoni

Abstract

The variety of microstructures that form at low solidification speed in peritectic alloys, bands, and islands, or even coupled (or cooperative) growth of the primary α and peritectic β phases, have been previously explained by nucleation-growth mechanisms. In a recent investigation on Cu-Sn, a new growth mechanism was conjectured on the basis of two-dimensional (2-D) optical microscopy and electron backscattered diffraction (EBSD) observations made in longitudinal sections. In the present contribution, synchrotron-based tomographic microscopy has been used to confirm this mechanism: α and β phases totally interconnected in three dimensions and bands (or islands) can result from an overlay mechanism, rather than from a nucleation events sequence. When the lateral growth of a new layer is too fast, an instability can lead to the formation of a lamellar structure as for eutectic alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. H.W. Kerr and W. Kurz: Int. Met. Rev., 1996, vol. 41, pp. 129–64.10.1179/imr.1996.41.4.129 ↗
2. W.J. Boettinger, S.R. Coriell, A.L. Greer, A. Karma, W. Kurz, M. Rappaz, and R. Trivedi: Acta Mater., 2000, vol. 48, pp. 43–70.10.1016/S1359-6454(99)00287-6 ↗
3. R. Trivedi: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1583–90.10.1007/BF02647608 ↗
4. R. Trivedi, H. Miyahara, P. Mazumder, E. Simsek, and S.N. Tewari: J. Cryst. Growth, 2001, vol. 222, pp. 365–79.10.1016/S0022-0248(00)00761-2 ↗
5. R. Trivedi and J.S. Park: J. Cryst. Growth, 2002, vol. 235, pp. 572–88.10.1016/S0022-0248(01)01803-6 ↗
6. S. Dobler, T.S. Lo, M. Plapp, A. Karma, and W. Kurz: Acta Mater., 2004, vol. 52, pp. 2795–2808.10.1016/j.actamat.2004.02.026 ↗
7. F. Kohler, L. Germond, J.-D. Wagnière, and M. Rappaz: Acta Mater., 2008, vol. 57, pp. 56–68.10.1016/j.actamat.2008.08.058 ↗
8. O. Hunziker, M. Vandyoussefi, and W. Kurz: Acta Mater., 1998, vol. 46, pp. 6325–36.10.1016/S1359-6454(98)00336-X ↗
9. R. Trivedi, A. Karma, T.S. Lo, J.S. Park, and M. Plapp: Solidification Microstructures, Proc. 2nd Workshop, Zermatt, Switzerland, 1998.
10. T.S. Lo, S. Dobler, M. Plapp, A. Karma, and W. Kurz: Acta Mater., 2003, vol. 51, pp. 599–611.10.1016/S1359-6454(02)00440-8 ↗
11. P. Mazumder, T. Trivedi, and A. Karma: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1233–46.10.1007/s11661-000-0119-x ↗
12. B. Chalmers: Physical Metallurgy, Wiley, New York, NY, 1959.
13. J.H. Lee and J.D. Verhoeven: J. Cryst. Growth, 1994, vol. 144, pp. 353–66.10.1016/0022-0248(94)90477-4 ↗
14. M. Vandyoussefi, H.W. Kerr, and W. Kurz: Acta Mater., 2000, vol. 48, pp. 2297–2306.10.1016/S1359-6454(00)00034-3 ↗
15. S. Dobler: PhD Thesis 2409, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland, 2001, http://library.epfl.ch/theses/?nr=2409.
16. S. Dobler and W. Kurz: Z. Metallkd., vol. 95, pp. 592–95.10.1515/ijmr-2004-0114 ↗
17. T.S. Lo, A. Karma, and M. Plapp: Phys. Rev. E, 2001, vol. 63, pp. 031504-1–031504-15.
18. F. Kohler: PhD Thesis 4027, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland, 2008, http://library.epfl.ch/theses/?nr=4037.
19. S. Akamatsu, S. Moulinet, and G. Faivre: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2039–48.10.1007/s11661-001-0016-y ↗
20. J.A. Dantzig and M. Rappaz: Solidification, EPFL Press, Lausanne, Switzerland, 2009.10.1201/9781439808030 ↗
21. M. Stampanoni, A. Groso, A. Isenegger, G. Mikuljan, Q. Chen, A. Bertrand, S. Henein, R. Betemps, U. Frommherz, P. Böhler, D. Meister, M. Lange, and R. Abela: Developments in X-Ray Tomography V, Proc. SPIE, U. Bonse, ed., vol. 6318, 63180M, (2006) 1605-7422/06, DOI:10.1117/12.679497.10.1117/12.679497 ↗