Effect of Bonding Time on Interfacial Reaction and Mechanical Properties of Diffusion-Bonded Joint Between Ti-6Al-4V and 304 Stainless Steel Using Nickel as an Intermediate Material
Source abstract
Abstract
In the current study, solid-state diffusion bonding between Ti-6Al-4V (TiA) and 304 stainless steel (SS) using pure nickel (Ni) of 200-μm thickness as an intermediate material was carried out in vacuum. Uniaxial compressive pressure and temperature were kept at 4 MPa and 1023 K (750 °C), respectively, and the bonding time was varied from 30 to 120 minutes in steps of 15 minutes. Scanning electron microscopy images, in backscattered electron mode, revealed the layerwise Ti-Ni-based intermetallics like either Ni3Ti or both Ni3Ti and NiTi at titanium alloy-nickel (TiA/Ni) interface, whereas nickel-stainless steel (Ni/SS) interface was free from intermetallic phases for all the joints. Chemical composition of the reaction layers was determined by energy dispersive spectroscopy (SEM–EDS) and confirmed by X-ray diffraction study. Maximum tensile strength of ~382 MPa along with ~3.7 pct ductility was observed for the joints processed for 60 minutes. It was found that the extent of diffusion zone at Ni/SS interface was greater than that of TiA/Ni interface. From the microhardness profile, fractured surfaces, and fracture path, it was demonstrated that the failure of the joints was initiated and propagated apparently at TiA/Ni interface near Ni3Ti intermetallic for bonding time less than 90 minutes, and through Ni for bonding time 90 minutes and greater.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. N.F. Kazakov: Diffusion Bonding of Materials, 1st Edition, Mir Publishers, Moscow, 1985, pp. 11-12.
2. P.A. Thornton, and V.J. Colangelo: Fundamentals of Engineering Materials,Prentice-Hall, Englewood Cliffs, N.J., 1985, p. 106.
3. J.M. Gómez de Salazar, A. Ureña, and J.G. Carrión: Scripta Mater., 1996, vol. 35, pp. 479–84.10.1016/1359-6462(96)00177-7 ↗
4. M. Holmquist, V. Recina, J. Ockborn, B. Pettersson, and E. Zumalde: Scripta Mater., 1998, vol. 39, pp. 1101–06.10.1016/S1359-6462(98)00274-7 ↗
5. M.S. Yeh and T.H. Chuang: Scripta Metall. Mater., 1995, vol. 33, pp. 1277–81.10.1016/0956-716X(95)00364-2 ↗
6. S. Fukumoto, A. Hirose, and K.F. Kobayashi: Compos. Eng., 1995, vol. 5, pp. 1081–89.10.1016/0961-9526(95)00060-Z ↗
7. N. Kahraman, B. Gulenc, and F. Findik: Int.. J. Impact Eng., 2007, vol. 34, pp. 1423–32.10.1016/j.ijimpeng.2006.08.003 ↗
8. Z. Sun, I. Annergren, D. Pan, and T.A. Mai: Mater. Sci. Eng. A, 2003, vol. 345, pp. 293–300.10.1016/S0921-5093(02)00477-X ↗
9. G. Thomas and V. Ramachandra: Internal Report, Vikram Sarabhai Space Center, Trivandrum, 1981, pp. 1–14.
10. C. Xia and Z. Jin: J. Less Common Met., 1990, vol. 162, pp. 315–22.10.1016/0022-5088(90)90347-M ↗
11. A. Fuji, K. Ameyama, and T.H. North: J. Mater. Sci., 1996, vol. 31, pp. 819–27.10.1007/BF00367903 ↗
12. K. Bhanumurthy and G.B. Kale: J. Mater. Sci. Lett., 1993, vol. 12, pp. 1879–81.10.1007/BF00540018 ↗
13. B. Alemán, L. Gutiérrez, and J.J. Urcola: Mater. Sci. Technol., 1993, vol. 9, pp. 633–41.10.1179/mst.1993.9.8.633 ↗
14. G. Cam and M. Kocak: Int. Mater. Rev., 1998, vol. 43, pp. 1–44.10.1179/imr.1998.43.1.1 ↗
15. S. Hinotani and Y. Ohmori: Trans. Jpn. Inst. Met., 1988, vol. 29, pp. 116–24.10.2320/matertrans1960.29.116 ↗
16. P. He, J. Zhang, R. Zhou, and X. Li: Mater. Charact., 1999, vol. 43, pp. 287–92.10.1016/S1044-5803(99)00008-X ↗
17. S. Kundu, S. Chatterjee, D. Olson, and B. Mishra: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2053–60.10.1007/s11661-007-9273-8 ↗
18. M. Ghosh, S. Kundu, S. Chatterjee, and B. Mishra: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1891–99.10.1007/s11661-005-0052-0 ↗
19. H. Kato, S. Abe, and T. Tomizawa: J. Mater. Sci., 1997, vol. 32, pp. 5225–32.10.1023/A:1018694106588 ↗
20. T. Vigraman, D. Ravindran, and R. Narayanasamy: Mater. Des., 2012, vol. 36, pp. 714–27.10.1016/j.matdes.2011.12.024 ↗
21. T. Vigraman, R. Narayanasamy, and D. Ravindran: Mater. Des., 2012, vol. 35, pp. 156–69.10.1016/j.matdes.2011.09.063 ↗
22. M. Ghosh, S. Chatterjee, and B. Mishra: Mater. Sci. Eng. A, 2003, vol. 363, pp. 268–74.10.1016/S0921-5093(03)00649-X ↗
23. N.F. Kazakov: Diffusion Bonding of Materials, 1st Edition, Mir Publishers, Moscow, 1985, p. 166.
24. N. Sevryukov: Nonferrous Metallurgy, 1st Edition, Mir Publishers, Moscow, 1975, p. 191.
25. S. Kundu and S. Chatterjee: Mater. Sci. Eng. A, 2006, vol. 425, pp. 107–13.10.1016/j.msea.2006.03.034 ↗
26. S. Kundu, G. Anand, and S. Chatterjee: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2196–211.10.1007/s11661-012-1553-2 ↗
27. T. Vigraman, D. Ravindran, and R. Narayanasamy: Mater. Des., 2012, vol. 34, pp. 594–602.10.1016/j.matdes.2011.05.012 ↗
28. M.I. Barrena, J.M. Gómez de Salazar, N. Merino, L. Matesanz: Mater. Charact., 2008, vol. 59, pp. 1407–11.10.1016/j.matchar.2007.12.008 ↗
29. M.I. Barrena, L. Matesanz, J.M.Gómez de Salazar: Mater. Charact., 2009, vol. 60, pp. 1263–67.10.1016/j.matchar.2009.05.007 ↗
30. G. Thirunavukarasu, S. Kundu, B. Mishra, and S. Chatterjee: Metall. Mater. Trans. A, 2013, DOI:10.1007/s11661-013-1940-3.10.1007/s11661-013-1940-3 ↗
31. Annual Book of ASTM E8M-11 Standard, vol. 03.01, ASTM, Philadelphia, PA, 2012.
32. M. Ghosh and S. Chatterjee: Mater. Sci. Eng. A, 2003, vol. 358, pp. 152–58.10.1016/S0921-5093(03)00298-3 ↗
33. B. Alemán, I. Gutiérrez, and J. J. Urcola: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 437–46.10.1007/BF02664680 ↗
34. T. Fischer: Materials Science for Engineering Students, 1st Indian Reprint, Academic Press, San Diego, 2009, pp. 97, 112–115.
35. R.W. Messler, Jr.: The Essence of Materials for Engineers, 1st Indian ed., Jones & Bartlett, Sudbury, MA, 2011, pp. 307–08.
36. D.A. Porter, K.E. Easterling and M.Y. Sherif: Phase Transformations in Metals and Alloys, 3rd ed., CRC, Boca Raton, 2009, pp. 100–04.