Fracture Properties of SPS Tungsten Copper Powder Composites
Source abstract
Abstract
Tungsten-copper composites with various copper nano-particles volume fractions were manufactured and examined. Tungsten-copper composites with 20 pct, 25 pct, and 30 pct volume fractions were mechanically mixed and sintered. spark plasma sintering (SPS) method was used for samples preparation at two different sintered temperatures 1273 K and 1373 K (1000 °C and 1100 °C). The effect of copper nano-particles on the bulk density, hardness, the coefficient of thermal expansion (CTE), electrical conductivity, and stress-strain behavior of the produced composites were studied. The hardness was found to decrease with the increase of the copper volume fraction in the composites. Conversely, the CTE and electrical conductivity increases with the increase of the copper volume fraction in the composites. Furthermore, the elastic modulus were extracted from tensile stress-strain behavior were found to increase with the increase of the copper volume fraction in the composites. Finally, the fracture surface roughness was studied using high resolution optical investigations and was noticeably higher with the increase of the copper volume fraction in the composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. J.L. Johnson and R.M. German: J. Adv. Powder Metall., 1991, vol. 6, pp. 391–405.
2. Y.D. Kim, N.L. Oh, S.T. Oh, and I.H. Moon: Mater. Lett., 2001, vol. 51(5), pp. 420–24. Doi:10.1016/S0167-577X(01)00330-5.10.1016/S0167-577X(01)00330-5 ↗
3. E. Uhlmann, S. Piltz, and K. Schauer: J. Mater. Process. Technol., 2005, vol. 167, pp. 402–07. doi:10.1016/j.jmatprotec.2005.05.022.10.1016/j.jmatprotec.2005.05.022 ↗
4. E.S. Yoon, J.S. Lee, S.T. Oh, and B.K. Kim: Int. J. Refract Metal Hard Mater., 2002, vol. 20(3), pp. 201–06. doi:10.1016/S0263-4368(02)00003-3.10.1016/S0263-4368(02)00003-3 ↗
5. S.H. Hong and B.K. Kim: Mater. Lett., 2003, vol. 57(18), pp. 2761–67. doi:10.1016/S0167-577X(03)00071-5.10.1016/S0167-577X(03)00071-5 ↗
6. F. Doré, S. Lay, N. Eustathopoulos, and C.H. Allibert: Scripta Mater., 2003, vol. 49(3), pp. 237–42. doi:10.1016/S1359-6462(03)00244-6.10.1016/S1359-6462(03)00244-6 ↗
7. S. Bera, Z. Zúberová, R.J. Hellmig, Y. Estrin, and I. Manna: Philos. Mag., 2010, vol. 90(11), pp. 1465–83. doi:10.1080/14786430903365286.10.1080/14786430903365286 ↗
8. S. Bera, W. Lojkowsky, and I. Manna: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 3276–83. doi:10.1007/s11661-009-0019-7.10.1007/s11661-009-0019-7 ↗
9. M.A. El-Hadek and S. Kaytbay: Strain, 2009, vol. 45(6), pp. 506–15. doi:10.1111/j.1475-1305.2008.00552.x.10.1111/j.1475-1305.2008.00552.x ↗
10. J. Cheng, P. Song, Y. Gong, Y. Cai, and Y. Xia: Mater. Sci. Eng., 2008, vol. 488, pp. 453–57. doi:10.1016/j.msea.2007.11.022.10.1016/j.msea.2007.11.022 ↗
11. A. K. Basu and F.R. Sale: J. Mater. Sci., 1978, vol. 13, pp. 2703–11.10.1007/BF02402759 ↗
12. M.B. Naseri, A.R. Kamali, and S.M. Hadavi: Russ. J. Inorg. Chem., 2010, vol. 55(2), pp. 167–73. doi:10.1134/S0036023610020051.10.1134/S0036023610020051 ↗
13. Z.A. Munir, U. Anselmi-Tamburini, and M. Ohyanagi: J. Mater. Sci., 2006, vol. 41, pp. 763–77. doi:10.1007/s10853-006-6555-2.10.1007/s10853-006-6555-2 ↗
14. G.G. Lee, G.H. Ha, and B.K. Kim: Powder Metall., 2000, vol. 43(1), pp. 79–82.10.1179/003258900665736 ↗
15. M. Omori: Mater. Sci. Eng. A, 2000, vol. 287(2), pp. 183–88. doi:10.1016/S0921-5093(00)00773-5.10.1016/S0921-5093(00)00773-5 ↗
16. J.R. Groza: Powder Metall. Met. Handb., 1998, vol. 7, pp. 583–89.
17. J.R. Groza, M. Garcia, and J.A. Schneider: J. Mater. Res., 2001, vol. 16, pp. 286–92. doi:10.1557/JMR.2001.0043.10.1557/JMR.2001.0043 ↗
18. M. Tokita: Mater. Sci. Forum, 1999, vols. 308–311, pp. 83–88. doi:10.4028/www.scientific.net/MSF.308-311.83.10.4028/www.scientific.net/MSF.308-311.83 ↗
19. U. Anselmi-Tamburini, J.E. Garay, and Z.A. Munir: Mater. Sci. Eng. A, 2005, vol. 407, pp. 24–30. doi:10.1016/j.msea.2005.06.066.10.1016/j.msea.2005.06.066 ↗
20. T.B. Holland, J.F. Loffler, and Z.A. Munira: J. Appl. Phys., 2004, vol. 95(5), pp. 2896–99. doi:10.1063/1.1642280.10.1063/1.1642280 ↗
21. P. Asoka-Kumar, K. O’Brien, K.G. Lynn, P.J. Simpson, and K.P. Rodbell: Appl. Phys. Lett., 1996, vol. 68, pp. 406–08. doi:10.1063/1.116700.10.1063/1.116700 ↗
22. M.H. Maneshian and A. Simchi: J. Compos. Compd., 2008, vol. 463, pp. 153–59. doi:10.1016/j.jallcom.2007.08.080.10.1016/j.jallcom.2007.08.080 ↗
23. Keithely: Low-Level Measurements Handbook. Anablog-Blog on EDN, New York Publications, 1991.
24. IACS: Electrical properties. International Annealed Copper Standard by the International Electro Technical Commission (IACS) in terms of the following properties at 20 °C, 1913.
25. G. Weng: Int. J. Eng. Sci., 1984, vol. 229(7), pp. 845–856. doi:10.1016/0020-7225(84)90033-8.10.1016/0020-7225(84)90033-8 ↗
26. S.-Y. Chang, C.-F. Chen, S.-J. Lin, and T.Z. Kattamis: Acta Mater., 2003, vol. 51(20), pp. 6291–302. doi:10.1016/S1359-6454(03)00462-2.10.1016/S1359-6454(03)00462-2 ↗
27. D. Janković Ilić, J. Fiscina, C.J.R. González-Oliver, N. Ilić, and F. Mücklich: J. Mater. Sci., 2008, vol. 43(20), pp. 6777–83. doi:10.1007/s10853-008-2941-2.10.1007/s10853-008-2941-2 ↗
28. S. Raymond: Physics for Scientists and Engineers with Modern Physics, 3rd ed., Saunders College Publishing, Forth Worth.
29. A. Abousree Hegazy, M. Abdallah, A. Ibrahim, and S.F. Mostafa: Res. Bull. Aust. Inst. High Energ. Mater. This manuscript has been reviewed and accepted for publication in the 2010, ISBN: 978-0-9806811-8-5, http://bulletins.ausihem.org/.
30. X. Shi, S. Wang, X. Yang, Q. Zhang, and Y. Wang: J. Wuhan Univ. Technol. (Mater. Sci. Ed.), 2010, vol. 25(6), pp. 909–13. doi:10.1007/s11595-010-0118-8.10.1007/s11595-010-0118-8 ↗