journal article·2002-08

Why do dislocations assemble into interfaces in epitaxy as well as in crystal plasticity? To minimize free energy

D. Kuhlmann-Wilsdorf

Publisher page

Abstract

Dislocations commonly form planar arrays that minimize the free interfacial energy between relatively mismatched crystal volumes. In epitaxy and phase transformations, the causative misfit is that between differences in lattice structure and/or orientations of different phases. In deformed homogeneous crystalline materials, the planar dislocation arrays are grain and mosaic block boundaries that accommodate relative misorientations within the same crystal structure. Thus, overwhelmingly, planar dislocation arrays have a basically common origin, namely minimization of interfacial energies. Consequently, they are all subject to the low-energy dislocation structures (LEDS) hypothesis. While the specific applications of the underlying general theory are well advanced in terms of epitaxy, phase, and grain boundaries, in connection with plastic deformation that very basis is widely overlooked, if not denied. The present article aims to (a) document the fact that, while being formed, dislocation structures due to plastic deformation are in thermodynamical equilibrium, (b) firmly establish the outlined connection between planar dislocation arrays of all types, and, thereby, (c) establish the kinship between epitaxy and plastic deformation of crystalline materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (89)

Show source-provided references
1. F.C. Frank and J.H. van der Merwe: Proc. R. Soc. (London) A, 1949, vol. 198, pp. 205–216; pp. 216–25.
2. F.C. Frank and J.H. van der Merwe: Proc. R. Soc. (London) A, 1949, vol. 198, pp. 205, 216; vol. 200, pp. 125–34.10.1098/rspa.1949.0095 ↗
3. J.H. van der Merwe and F.C. Frank: Proc. R. Soc. (London) A, 1949, vol. 62, pp. 315–16.10.1088/0370-1298/62/5/108 ↗
4. J.H. van der Merwe: Proc. Phys. Soc. (London) A, 1950, vol. 63, pp. 616–37.10.1088/0370-1298/63/6/310 ↗
5. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng. A, 2001, vol. A315, pp. 211–16.10.1016/S0921-5093(01)01204-7 ↗
6. D. Kuhlmann-Wilsdorf: Phys. Status Solidi A, 1987, vol. 104, pp. 121–44.10.1002/pssa.2211040109 ↗
7. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng. A, 1989, vol. 113, pp. 1–41.10.1016/0921-5093(89)90290-6 ↗
8. D. Kuhlmann-Wilsdorf: Phys. Status Solidi A, 1995, vol. 149, pp. 131–53.10.1002/pssa.2211490110 ↗
9. D. Kuhlmann-Wilsdorf: Mater. Res. Innovations, 1998, vol. 1, pp. 265–97.10.1007/s100190050051 ↗
10. D. Kuhlmann-Wilsdorf: Phil. Mag. A, 1999, vol. 79, pp. 955–1008.10.1080/014186199252453 ↗
11. D. Kuhlmann-Wilsdorf, S.S. Kulkarni, J.T. Moore, and E.A. Starke: Metall. Mater. Trans. A, 1999, vol. 30, pp. 2491–2501.10.1007/s11661-999-0258-7 ↗
12. D. Kuhlmann-Wilsdorf: Metall. Mater. Trans. A, 1999, vol. 30, pp. 2391–2401.10.1007/s11661-999-0247-x ↗
13. D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1999, vol. 47, pp. 1697–1712.10.1016/S1359-6454(98)00413-3 ↗
14. D. Kuhlmann-Wilsdorf: in Dislocations in Solids, F.R.N. Nabarro, ed., North Holland Publ. Co., Amsterdam, submitted July 31st, 1999, vol. 11, in press.
15. H.-J. Kestenbach, W. Krause, and T.L. da Silveira: Acta Metall., 1978, vol. 26, pp. 661–70.10.1016/0001-6160(78)90016-0 ↗
16. C. Laird, Z. Wang, B.-T. Ma, and H.-F. Chai: Mater. Sci. Eng. A, 1989, vol. 113, pp. 245–57.10.1016/0921-5093(89)90313-4 ↗
17. L. Llanes and C. Laird: Mater. Sci. Eng. A, 1993, vol. 161, pp. 1–12.10.1016/0921-5093(93)90469-U ↗
18. D. Kuhlmann-Wilsdorf and K.I. Winey: J. Appl. Phys., 1999, vol. 85, p. 6393–99.10.1063/1.370142 ↗
19. P.S. Pinheiro and K.I. Winey: Macromolecules, 1998, vol. 31, pp. 4447–56.10.1021/ma980186a ↗
20. R. Becker: Phys. Z., 1925, vol. 26, pp. 919–25.
21. R. Becker: Z. Phys., 1925, vol. 33, p. 185.10.1007/BF01328304 ↗
22. R. Becker: Z. Technol. Phys., 1926, vol. 7, p. 547.
23. R. Becker and W. Boas: Metallwirtschaft, 1929, vol. 8, pp. 317–21.
24. R. Becker and E. Orowan: Z. Phys., 1932, vol. 79, pp. 566–72.10.1007/BF01330508 ↗
25. D. Kuhlmann and G. Masing: Z. Metallkd., 1948, vol. 39, pp. 361–75.
26. P. Haasen and G. Leibfried: Z. Metallkd., 1952, vol. 43, pp. 317–21.
27. F.C. Frank: Pittsburgh Symp. on the Plastic Deformation of Crystalline Solids, Report NAVEXOS-P-834, Office of Naval Research, Washington, DC, 1950, p. 150.
28. J. Meissner: Z. Metallkd., 1959, vol. 50, p. 207.
29. H. Neuhäuser: in Dislocations in Solids, Applications and Recent Advances, F.R.N. Nabarro, ed., North Holland Publ. Co., Amsterdam, 1983, vol. 6, pp. 319–440.
30. G.I. Taylor: Proc. R. Soc. (London), 1934, vol. 145, pp. 362–387 and pp. 388–404.
31. J.W. Mitchell, J.C. Chevrier, B.J. Hockey, and J.P. Monaghan: Can. J. Phys., 1967, vol. 45, pp. 453–79.10.1139/p67-041 ↗
32. B.J. Hockey and J.W. Mitchell: Phil. Mag., 1972, vol. 26, pp. 409–23.10.1080/14786437208227438 ↗
33. R.B. Schwarz and J.W. Mitchell: Phys. Rev. B, 1974, vol. 9, pp. 3292–99.10.1103/PhysRevB.9.3292 ↗
34. D.A. Taliaferro, L.F. Henry, and J.W. Mitchell: J. Appl. Phys., 1974, vol. 45, pp. 519–22.10.1063/1.1663275 ↗
35. D.A. Taliaferro and J.W. Mitchell: J. Appl. Phys., 1974, vol. 45, pp. 523–27.10.1063/1.1663276 ↗
36. J.W. Mitchell: Phys. Status Solidi A, 1993, vol. 135, pp. 455–66.10.1002/pssa.2211350211 ↗
37. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng., 1979, vol. 39, pp. 231–45.10.1016/0025-5416(79)90062-4 ↗
38. P. Müllner, C. Solenthaler, P. Uggowitzer, and M.O. Speidel: Mater. Sci. Eng. A, 1993, vol. 164, pp. 164–69.10.1016/0921-5093(93)90655-X ↗
39. R.L. Patterson and H.G.F. Wilsdorf: in Fracture H. Liebowitz, ed., Academic Press, NY, 1969, vol. 1, pp. 183–240.
40. H.G.F. Wilsdorf and D. Kuhlmann-Wilsdorf: Phys. Rev. Lett., 1959, vol. 4, pp. 170–72.10.1103/PhysRevLett.3.170 ↗
41. D. Kuhlmann-Wilsdorf: in Aluminum Alloys: Their Physical and Mechanical Properties, Proc. 7th Int. Conf. ICAA7, Charlottesville, VA, Apr. 2000, E.A. Starke, Jr., T.H. Sanders, Jr. and W.A. Cassada, Trans Tech Publ., Aedermannsdorf, Switzerland, Materials Science Forum, 2000, vols. 331–337, pp. 689–702.
42. D. Kuhlmann-Wilsdorf and H.G.F. Wilsdorf: Acta Metall., 1962, vol. 10, pp. 584–86.10.1016/0001-6160(62)90210-9 ↗
43. D. Kuhlmann-Wilsdorf, R. Maddin, and H.G.F. Wilsdorf: in Strengthening Mechanisms in Solids, J.J. Harwood, ed., ASM, Metals Park, OH, 1962, pp. 137–78.
44. D. Kuhlmann-Wilsdorf and H.G.F. Wilsdorf: in Electron Microscopy and Strength of Crystals, G. Thomas and J. Washburn, eds., Interscience, New York, NY, 1963, pp. 575–604.
45. R.H. Geiss, D. Kuhlmann-Wilsdorf, W.J. Tropf, and H.G.F. Wilsdorf: 31st Ann. Electron Microscopy Soc. Am., New Orleans, LA, 1973, C.J. Arceneaux, ed.10.1017/S0424820100071235 ↗
46. J.E. Bailey and P.B. Hirsch: Phil. Mag., 1960, vol. 5, pp. 485–97.10.1080/14786436008238300 ↗
47. J.B. Bilde-Sørensen: Mater. Sci. Eng., 1986, vol. 81, pp. 211–16.10.1016/0025-5416(86)90264-8 ↗
48. G.I. Taylor: Trans. Faraday Soc., 1928, vol. 24, pp. 121–25.10.1039/tf9282400121 ↗
49. K. Yamaguchi: Sci. Pap. Inst. Phys. Chem. Res. (Jpn.), 1929, vol. 11, pp. 151–69.
50. D. Kuhlmann-Wilsdorf and N. Comins: Mater Sci. Eng., 1983, vol. 60, pp. 7–24.10.1016/0025-5416(83)90073-3 ↗
51. D.A. Hughes and Y.L. Liu: in Hot Deformation of Aluminum Alloys, T.G. Langdon, H.D. Merchant, J.G. Morris, and M.A. Zaidi, eds., TMS, Warrendale, PA, 1991, pp. 21–30.
52. D.A. Hughes: Acta Metall. Mater., 1993, vol. 41, pp. 1421–30.10.1016/0956-7151(93)90251-M ↗
53. N. Hansen and D. Kuhlmann-Wilsdorf: Mater. Sci. Eng., 1986, vol. 81, pp. 141–61.10.1016/0025-5416(86)90258-2 ↗
54. C.Y. Barlow, B. Bay, and N. Hansen: Phil. Mag., 1985, vol. 51, pp. 253–75.10.1080/01418610.1985.12069161 ↗
55. P.J. Jackson and D. Kuhlmann-Wilsdorf: Scripta Metall., 1982, vol. 16, pp. 105–07.10.1016/0036-9748(82)90412-4 ↗
56. R.A. Foxall, M.S. Duesbery, and P.B. Hirsch: Can. J. Phys., 1967, vol. 45, pp. 607–29.10.1139/p67-052 ↗
57. D. Kuhlmann-Wilsdorf: Phys. Status Solidi (a), 1995, vol. 149, pp. 131–53.10.1002/pssa.2211490110 ↗
58. C.G. Darwin: Phil. Mag., 1914, vol. 27, pp. 315 and 675.10.1080/14786440208635093 ↗
59. E.E. Laufer and W.N. Roberts: Phil. Mag., 1966, vol. 14, pp. 65–78.10.1080/14786436608218989 ↗
60. D. Kuhlmann-Wilsdorf, E.E. Laufer, and H. Nine: J. Appl. Phys., 1967, vol. 38, pp. 896–98.10.1063/1.1709444 ↗
61. Proc. Int. Conf. Dislocations 2000, L. Levine, L.P. Kubin and R. Becker, eds., NIST, Gaithersburg, MD, June 19–22, 2000; Mater. Sci. Eng. A, Special Issue, 2001, vols. 309–10, pp. (i) to 567.
62. M.N. Bassim and D. Kuhlmann-Wilsdorf: Phys. Status Solidi (a), 1973, vol. 17, pp. 379–93.10.1002/pssa.2210170202 ↗
63. S.V. Raj and G.M. Phan: Mater. Sci. Eng., 1986, vol. 81, pp. 217–37.10.1016/0025-5416(86)90265-X ↗
64. D. Kuhlmann-Wilsdorf: Scripta Mater., 1996, vol. 34, pp. 641–50.10.1016/1359-6462(95)00567-6 ↗
65. D. Kuhlmann-Wilsdorf: Trans. TMS, AIME, 1962, vol. 224, pp. 1047–61.
66. D. Kuhlmann-Wilsdorf: Acta Metall., 1989, vol. 37, pp. 3217–23.10.1016/0001-6160(89)90193-4 ↗
67. D. Kuhlmann-Wilsdorf: in Wokhardening, J.P. Hirth and J. Weertman, eds., Gordon and Breach, New York, NY, 1968, pp. 97–132.
68. P. Lin, S.S. Lee, and A.J. Ardell: Acta Metall., 1989, vol. 37, pp. 739–48.10.1016/0001-6160(89)90257-5 ↗
69. D.A. Hughes, D.C. Chrzan, Q. Liu, and N. Hansen: Phys. Rev. Lett., 1998, vol. 81, pp. 4664–67.10.1103/PhysRevLett.81.4664 ↗
70. H. Wilsdorf and D. Kuhlmann-Wilsdorf: Z. Ang. Phys., 1952, vol. 4, pp. 361–370; pp. 409–418; pp. 418–24.
71. R. von Mises: Z. Ang. Math. Mech., 1928, vol. 8, pp. 161–85.10.1002/zamm.19280080302 ↗
72. G.I. Taylor: J. Inst. Metals (London), 1938, vol. 62, pp. 307–24; S. Timoshenko Anniversary Volume, MacMillan Co, New York, NY, 1938, pp. 218–35.
73. B. Bay, N. Hansen, and D. Kuhlmann-Wilsdorf: Mater. Sci. Eng., 1989, vol. A113, pp. 385–97.10.1016/0921-5093(89)90325-0 ↗
74. B. Bay, N. Hansen, and D. Kuhlmann-Wilsdorf: Mater. Sci. Eng., 1992, vol. A158, pp. 139–46.10.1016/0921-5093(92)90002-I ↗
75. B. Bay, N. Hansen, D.A. Hughes, and D. Kuhlmann-Wisdorf: Acta Metall. Mater., 1992, vol. 40, pp. 205–19.10.1016/0956-7151(92)90296-Q ↗
76. S.S. Kulkarni, E.A. Starke, Jr., and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1998, vol. 46, pp. 5283–5301.10.1016/S1359-6454(98)00225-0 ↗
77. D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1999, vol. 47, pp. 1697–1712.10.1016/S1359-6454(98)00413-3 ↗
78. D. Kuhlmann-Wilsdorf, S.S. Kulkarni, J.T. Moore, and E.A. Starke: Metall. Mater. Trans., 1999, vol. 30A, pp. 2491–2501.10.1007/s11661-999-0258-7 ↗
79. D. Kuhlmann-Wilsdorf: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2391–2401.10.1007/s11661-999-0247-x ↗
80. D.L. Polis and K.I. Winey: Macromolecules, 1996, vol. 29, pp. 8180–87.10.1021/ma960831i ↗
81. T. Hasegawa and U. Kocks: Acta Metall., 1979, vol. 27, pp. 1705–16.10.1016/0001-6160(79)90085-3 ↗
82. D. Kuhlmann: Z. Phys., 1947, vol. 124, pp. 468–81.10.1007/BF01668885 ↗
83. D. Kuhlmann, G. Masing, and J. Raffelsieper: Z. Metallkd., 1949 vol. 40, pp. 241–46.
84. E. Nes: Acta Metall. Mater., 1995, vol. 43, pp. 2189–2207.10.1016/0956-7151(94)00409-9 ↗
85. C.T. Young, T.J. Headley, and J.L. Lytton: Mater. Sci. Eng., 1986, vol. 81, pp. 391–407.10.1016/0025-5416(86)90278-8 ↗
86. E.H. Dix, W.A. Anderson, and M. Byron Shumaker: Corrosion, 1959, vol. 15, p. 19.10.5006/0010-9312-15.2.19 ↗
87. R.E. Sanders, S.F. Baumann, and H.C. Stumpf: in Aluminum Alloys, Their Physical and Mechanical Properties, Proc. Int. Conf. UVA, Charlottesville, VA, 1986, E.A. Starke and R.E. Sanders; also J.E. Hatch: Aluminum, Properties and Physical Metallurgy, ASM, Metals Park, OH, 1984.
88. D. Kuhlmann-Wilsdorf, H.G.F. Wilsdorf, and J.A. Wert: Scripta Metall. Mater., 1994, vol. 31, pp. 729–34.10.1016/0956-716X(94)90218-6 ↗
89. E.C. Ellwood: J. Inst. Met., 1951, vol. 80, pp. 605–08.