journal article·2019-08-15

Controlling Particle/Metal Interactions in Metal Matrix Composites During Solidification: The Role of Melt Viscosity and Cooling Rate

Renhai Shi, Janet M. Meier, Alan A. Luo

Publisher page

Abstract

The homogenous dispersion of particles in a metal matrix is of critical importance to the design and manufacturing of particle-reinforced metal matrix composites (MMCs). This work studied the effects of increasing melt viscosity via microalloying and increasing cooling rate on the dispersion of particles in an aluminum-based MMC. A CALculation of PHAse Diagrams (CALPHAD)-based viscosity model was developed for the Al-Ni binary system. This viscosity model was coupled with a particle-capture model to explore particle/metal interactions during solidification. Three composites (Al + TiCp) with and without Ni were cast at different cooling rates. The first composite without Ni cast at a lower cooling rate showed macro-segregation and agglomeration of TiCp along the grain boundaries. The second composite without Ni cast at a higher cooling rate exhibited grain refinement and reduced macro-segregation of TiCp. The third composite alloyed with 1 wt pct Ni and cast at the same higher cooling rate had an improved distribution, and particles > 2 µm in size were captured in the grains. The composite with 1 wt pct Ni had a 45 pct higher melt viscosity and a 31 pct lower critical velocity for capture of TiCp, demonstrating a synergetic effect of increasing viscosity and cooling rate on improving particle dispersion in MMCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. T. M. Pollock, Science, 2010, vol. 328, pp. 986–987.10.1126/science.1182848 ↗
2. K. Lu, Science, 2010, vol. 328, pp. 319–320.10.1126/science.1185866 ↗
3. A.I. Taub, P.E. Krajewski, A.A. Luo, J.N. Owens, JOM, 2007, vol. 59 (2), pp. 48-57.10.1007/s11837-007-0022-7 ↗
4. A.I. Taub, A.A. Luo, MRS Bulletin, 2015, vol. 40(12), pp. 1045-1053.10.1557/mrs.2015.268 ↗
5. Z. Lu and L. Zhang, Mater. Des., 2017, vol. 116, pp. 427–437.10.1016/j.matdes.2016.12.034 ↗
6. X. Liu, Y. Zhang, B. Beausir, F. Liu, C. Esling, F. Yu, X. Zhao, L. Zuo, Acta Mater., 2015, vol. 97, pp. 338–347.10.1016/j.actamat.2015.06.041 ↗
7. X. Xia, W. Sun, A. A. Luo, and D. S. Stone, Acta Mater., 2016, vol. 111, pp. 335–347.10.1016/j.actamat.2016.03.068 ↗
8. A. A. Luo, R. K. Mishra, and A. K. Sachdev, Scr. Mater., 2011, vol. 64(5), pp. 410–413.10.1016/j.scriptamat.2010.10.045 ↗
9. R. Shi, A. A. Luo, CALPHAD, 2018, vol. 62, pp. 1-17.10.1016/j.calphad.2018.04.009 ↗
10. X. L. Zhong, W. L. E. Wong, and M. Gupta, Acta Mater., 2007, vol. 55(18), pp. 6338–6344.10.1016/j.actamat.2007.07.039 ↗
11. L. Jiang, H. Yang, J. K. Yee, X. Mo, T. Topping, E. J. Lavernia, J. M. Schoenung, Acta Mater., 2016, vol. 103, pp. 128–140.10.1016/j.actamat.2015.09.057 ↗
12. R. Daudin, S. Terzi, P. Lhuissier, J. Tamayo, M. Scheel, N. HariBabu, D.G. Eskin, L. Salvo, Acta Mater., 2017, vol. 125, pp. 303–310.10.1016/j.actamat.2016.12.005 ↗
13. W. Zhou, T. Yamaguchi, K. Kikuchi, N. Nomura, and A. Kawasaki, Acta Mater., 2017, vol. 125 pp. 369–376.10.1016/j.actamat.2016.12.022 ↗
14. H. Zhang, H. Springer, R. Aparicio-Fernandez, D. Raabe, Acta Mater., 2016, vol. 118, pp. 187-195.10.1016/j.actamat.2016.07.056 ↗
15. H. Springer, R. AparicioFernandez, M. J. Duarte, A. Kostka, and D. Raabe, Acta Mater., 2015, vol. 96, pp. 47–56.10.1016/j.actamat.2015.06.017 ↗
16. X. Zhang, T. Hu, J. F. Rufner, T. B. LaGrange, G. H. Campbell, E. J. Lavernia, J. M. Schoenung, K. van Benthem, Acta Mater., 2015, vol. 95. pp. 254–263.10.1016/j.actamat.2015.05.021 ↗
17. L. Y. Chen, J. Q. Xu, H. Choi, M. Pozuelo, X. Ma, S. Bhowmick, J. M. Yang, S. Mathaudhu, X. C. Li, Nature, 2015, vol. 528, pp. 539–543.10.1038/nature16445 ↗
18. X. Chen, K. E. Gonsalves, G. M Chow, and T. D. Xiao, Adv. Mater., 1994, vol. 6(6), pp. 481–484.10.1002/adma.19940060608 ↗
19. I. Kaldre, A. Bojarevics, I. Grants, T. Beinerts, M. Kalvans, M. Milgravis, G. Gerbeth, Acta Mater., 2016, vol. 118, pp. 253–259.10.1016/j.actamat.2016.07.045 ↗
20. D. Shangguan, S. Ahuja, and D. M. Stefanescu, Metall. Mater. Trans. A, 1992, vol. 23(2), pp. 669–680.10.1007/BF02801184 ↗
21. D. M. Stefanescu, F. R. Juretzko, B. K. Dhindaw, A. Catalina, S. Sen, and P. A. Curreri, Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1697–1706.10.1007/s11661-998-0092-3 ↗
22. J. Q. Xu, L. Y. Chen, H. Choi, and X. C. Li, J. Phys. Condens. Matter, 2012, vol. 24, pp. 255304.
23. L.Y. Kozlov, L.M. Romanov and N.N. Petrov, Izv. Vuzov. Chernaya. Met., 1983, vol. 3, pp. 7.
24. G. Kaptay, Proceedings of MicroCAD 2003 Conference, Section Metallurgy, University of Miskolc, pp. 23–28.
25. M. Hirai, ISIJ Int., 1993, vol. 33(2), pp. 251–258.10.2355/isijinternational.33.251 ↗
26. F. J. Cherne and P. A. Deymier, Scr. Mater., 1998, vol. 39(11), pp. 1613–1616.10.1016/S1359-6462(98)00339-X ↗
27. T. Ishikawa, P.-F. Paradis, J. T Okada and Y. Watanabe, Meas. Sci. Technol., 2012, vol. 23, pp. 1–9.
28. 28 T. Itami, “Condensed matter – liquid transition metals and alloys,” in Condensed Matter Disordered Solids, edited by S. K. Srivastava and N. H. March (World Scientific, Singapore, 1995), p. 123-25010.1142/9789812831576_0003 ↗
29. L. Battezzati and A. L. Greer, Acta Metall., 1989, vol. 37(7), pp. 1791–1802.10.1016/0001-6160(89)90064-3 ↗
30. Y. Sato, K. Sugisawa, D. Aoki, and T. Yamamura, Meas. Sci. Technol., 2005, vol. 16(2), pp. 363–371.10.1088/0957-0233/16/2/006 ↗
31. R. E. Rozas, A. D. Demirag, P. G. Toledo, and J. Horbach, J. Chem. Phys., 2016, vol. 145, pp. 064515;10.1063/1.4960771 ↗
32. N. Jakse and A. Pasturel, Appl. Phys. Lett., 2015, vol. 105, pp. 13.
33. M. Kehr, M. Schick, W. Hoyer, and I. Egry, High Temp. High Press., 2008, vol. 37(4), pp. 361–369.
34. I. Egry, R. Brooks, D. Holland-Moritz, R. Novakovic, T. Matsushita, Y. Plevachuk, E. Ricci, S. Seetharaman, V. Sklyarchuk, R. Wunderlich, High Temp., 2008, vol. 38, pp. 343–351.
35. R. K. Wunderlich and H. J. Fecht, Int. J. Mater. Res., 2011, vol. 102(9), pp. 1164–1173.10.3139/146.110572 ↗
36. T. Iida and R. I. L. Guthrie, The Physical Properties of Liquid Metals, Clarendon Press, Oxford, 1988, pp. 147.
37. Y. Sato, Jpn. J. Appl. Phys., 2011, vol. 50, pp. 1101.10.7567/JJAP.50.11RD01 ↗
38. J. Potschke and V. Rogge, J. Cryst. Growth, 1989, vol. 94, pp. 726-38;10.1016/0022-0248(89)90097-3 ↗
39. G. Lefever and A. Jolivet, Proceedings of International Conference on Heat Exchanger Fouling and Cleaning VIII, Schladming, Austria, 2009, pp. 120–124.
40. R.B. Bird, W.E. Stewart, and E.N. Lightfoot: Transport Phenomena, John Wiley & Sons, New York, NY, 1960.
41. D. Y. C. Chan and R. G. Horn, J. Chem. Phys., 1985, vol. 83, pp. 5311.10.1063/1.449693 ↗
42. R.J. Hunter, The Foundations of Colloid Science, second edition., Oxford University Press, Inc., New York, 2001.
43. F. Zhang, Y. Du, S. Liu, and W. Jie, CALPHAD, 2015, vol. 49, pp. 79–86.10.1016/j.calphad.2015.04.001 ↗
44. O. Redlich and A. T. Kister, Ind. Eng. Chem., 1948, vol. 40(2), pp. 345–348.10.1021/ie50458a036 ↗
45. M.C. Flemings: Solidification Processing, McGraw-Hill, Inc., New York, NY, 1974, pp. 148.
46. M. K. Premkumar and M. G. Chu, Metall. Mater. Trans. A, 1993, vol. 24A, pp. 2358-2362.10.1007/BF02648608 ↗
47. R.F. Egerton, Electron Energy-Loss Spectroscopy in the Electron Microscope. Springer, New York, 2011, pp. 135–15210.1007/978-1-4419-9583-4 ↗
48. X. J. Chen, A. C. Levi and E. Tosatti, Surf. Sci., 1991, vol. 251, pp. 641–644;10.1016/0039-6028(91)91070-E ↗
49. R.G. Lye and E.M. Logothetis, Phys. Rev., 1966, vol. 147, pp. 622.10.1103/PhysRev.147.622 ↗
50. J. F. Shackelford, W. Alexander, Materials Science and Engineering Handbook, third edition, CRC press, Boca Raton, 2001, pp. 430.
51. D.M. Stefanescu, B.K. Dhindaw, S.A. Kacar, and A. Moitra, Metall. Mater. Trans. A, vol. 19A, pp. 2847–55.10.1007/BF02645819 ↗
52. TCS Aluminium-Based Alloy Thermodynamic Databases TCAL, Version 5, S. Thermo-Calc Software, AB, Sweden (2015).
53. L. Zhang, Y. Du, I. Steinbach, Q. Chen, B. Huang, Acta Mater., 2010, vol. 58, pp. 3664–3675.10.1016/j.actamat.2010.03.002 ↗
54. A. Pasturel, N. Jakse, J. Non-Cryst. Solids, 2015, vol. 425, pp. 176–182.