journal article·2019-07-15Open access

Using In Situ Neutron Diffraction to Isolate Specific Features of Additively Manufactured Microstructures in 304L Stainless Steel and Identify Their Effects on Macroscopic Strength

D. W. Brown, D. P. Adams, L. Balogh, J. S. Carpenter, B. Clausen, V. Livescu, R. M. Martinez, B. M. Morrow, T. A. Palmer, R. Pokharel, M. Strantza, S. C. Vogel

Abstract

Additive manufacturing of metal components results in unique microstructures with, necessarily, mechanical properties that are distinct from conventionally produced components. In this work, four distinct microstructural features associated with directed energy deposition of 304L stainless steels, their stability, and their influences on flow strength were examined. These were (1) high dislocation density comparable with deformed materials, (2) increased ferrite content, (3) local chemical heterogeneity, and (4) tortuous grain morphology. In situ neutron diffraction measurements were used to monitor the evolution of the as-built microstructure during post-build heat treatment and relate the specific microstructural features to the strength behavior of the material following the heat treatment. The increased flow strength of the additively manufactured material relative to wrought counterparts is found to be due primarily to an increased dislocation density in the as-built material. However, the increased dislocation density does not completely account for the increased strength and it is hypothesized that some of the additional strength is related to the unique AM grain structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. DD Gu, W Meiners, K Wissenbach, R Poprawe (2012) Int. Mater. Rev., 2012, 57:133-164.10.1179/1743280411Y.0000000014 ↗
2. B. Berman (2012) Business Horizons, 5:155-162.10.1016/j.bushor.2011.11.003 ↗
3. D. Herzog, V. Seyda, E. Wycisk, C. Emmelmann, Acta Mater., 2016, vol. 117, pp. 371-392.10.1016/j.actamat.2016.07.019 ↗
4. HK Rafi, NV Karthik, H Gong, TL Starr, BE Stucker (2013) J. Mater. Eng. Perform. 22:3872-3883.10.1007/s11665-013-0658-0 ↗
5. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, W. Zhang, Prog. Mater. Sci., 2018, vol. 92, pp. 112-224.10.1016/j.pmatsci.2017.10.001 ↗
6. YM Wang, T Voisin, JT McKeown, J Ye, NP Calta, Z Li, Z Zeng, Y Zhang, W Chen, TT Roehling, RT Ott, MK Santala, PJ Depond, MJ Matthews, AV Hamza, T Zhu (2017) Nat. Mater. 17:63-71.10.1038/nmat5021 ↗
7. BM Morrow, TJ Lienert, CM Knapp, JO Sutton, MJ Brand, RM Pacheco, V Livescu, JS Carpenter, GT Gray (2018) Metall. Mater. Trans. A 49A: 3637-50.10.1007/s11661-018-4661-9 ↗
8. Z. Wang, T.A. Palmer, A.M. Beese, Acta Mater., 2016, vol. 110, pp. 226-235.10.1016/j.actamat.2016.03.019 ↗
9. B.E. Carroll, T.A. Palmer, A.M. Beese, Acta Mater., 2015, vol. 87, pp. 309-320.10.1016/j.actamat.2014.12.054 ↗
10. P Akerfeldt, M-L Antti, R Pederson (2016) Mater. Sci. Eng. A 674: 428-437.10.1016/j.msea.2016.07.038 ↗
11. E. Nishida, B. Song, M. Maguire, D. Adams, J. Carroll, J. Wise, J. Bishop, and T. Palmer: Dynamic compressive response of wrought and additive manufactured 304L stainless steels, in: Dymat 2015—11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, E. Cadoni, ed., 2015.10.1051/epjconf/20159401001 ↗
12. G.T. Gray, III, V. Livescu, P.A. Rigg, C.P. Trujillo, C.M. Cady, S.R. Chen, J.S. Carpenter, T.J. Lienert, and S. Fensin: Structure/property (constitutive and dynamic strength/damage) characterization of additively manufactured 316L SS, in: Dymat 2015—11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, E. Cadoni, ed., 2015.10.1051/epjconf/20159402006 ↗
13. M. Strantza, R. Vafadari, D. de Baere, B. Vrancken, W. van Paepegem, I. Vandendael, H. Terryn, P. Guillaume, D. van Hemelrijck (2016) Materials 9:15.10.3390/ma9020106 ↗
14. J.J. Lewandowski and M. Seifi: Metal Additive Manufacturing: A Review of Mechanical Properties, in: Annual Review of Materials Research, D.R. Clarke, ed., 2016, vol. 46, pp. 151–8610.1146/annurev-matsci-070115-032024 ↗
15. B. Vrancken, L. Thijs, J.-P. Kruth, J. Van Humbeeck, J. Alloy Compd., 2012, vol. 541, pp. 177-185.10.1016/j.jallcom.2012.07.022 ↗
16. W.E. Luecke, J.A. Slotwinski, Journal of Research of the National Institute of Standards and Technology, 2014, vol. 119, pp. 398-418.10.6028/jres.119.015 ↗
17. N.T. Aboulkhair, I. Maskery, C. Tuck, I. Ashcroft, N.M. Everitt, Mater. Des., 2016, vol. 104, pp. 174-182.10.1016/j.matdes.2016.05.041 ↗
18. M.E. Aydinoez, F. Brenne, M. Schaper, C. Schaak, W. Tillmann, J. Nellesen, T. Niendorf (2016) Mater. Sci. Eng. A 669: 246-258.10.1016/j.msea.2016.05.089 ↗
19. Y. Zhai, D.A. Lados, E.J. Brown, G.N. Vigilante, International Journal of Fatigue, 2016, vol. 93, pp. 51-63.10.1016/j.ijfatigue.2016.08.009 ↗
20. T.R. Smith, J.D. Sugar, J.M. Schoenung, C. SanMarchi (2018) JOM 70: 358-363.10.1007/s11837-017-2711-1 ↗
21. D.W. Brown, D.P. Adams, L. Balogh, J.S. Carpenter, B. Clausen, G. King, B. Reedlunn, T.A. Palmer, M.C. Maguire, S.C. Vogel (2017) Metall. Mater. Trans. A 48: 6055-6069.10.1007/s11661-017-4330-4 ↗
22. S.C. Vogel, M.A.M. Bourke, A.S. Losko, R. Pokharel, T.L. Ickes, J.F. Hunter, D.W. Brown, S.L. Voit, K.J. McClellan, and A. Tremsin, Los Alamos National Laboratory, 2016, pp. 125.
23. B. Clausen, PhD. Technical University of Denmark, 1997.
24. M. Gharghouri, G. Weatherly, J. Embury, and J. Root, Philos. Mag. A, 1999, vol. 79, pp. 1671–95.10.1080/01418619908210386 ↗
25. M.R. Daymond, C.N. Tome, M.A.M. Bourke (2000) Acta Mater. 48: 553-564.10.1016/S1359-6454(99)00354-7 ↗
26. L. Balogh, D. Brown, P. Mosbrucker, F. Long, M. Daymond (2012) Acta Mater. 60:5567-5577.10.1016/j.actamat.2012.06.062 ↗
27. I. Lonardelli, N. Gey, H.R. Wenk, M. Humbert, S.C. Vogel, L. Lutterotti (2007) Acta Mater. 55:5718-5727.10.1016/j.actamat.2007.06.017 ↗
28. H.M. Reiche, S.C. Vogel, P. Mosbrucker, E.J. Larson, and M.R. Daymond, Rev. Sci. Instrum., 2012, vol. 83, p. 053901.10.1063/1.4708619 ↗
29. F.J. Humphreys, M. Hatherly, Recrystallization and Related Annealing Phenomena. Elsevier Science, Amsterdam. 2004.
30. D.W. Brown, T.A. Sisneros, B. Clausen, S. Abeln, M.A.M. Bourke, B.G. Smith, M.L. Steinzig, C.N. Tome, S.C. Vogel (2008) Acta Mater. 57: 972-979.10.1016/j.actamat.2008.09.044 ↗
31. G.C. Kaschner, C.N. Tome, R.J. McCabe, A. Misra, S.C. Vogel, D.W. Brown (2007) Mater. Sci. Eng. A 463: 122-127.10.1016/j.msea.2006.09.115 ↗
32. C. Donadille, R. Valle, P. Dervin, R. Penelle (1989) Acta Metall. 37: 1547-1571.10.1016/0001-6160(89)90123-5 ↗
33. U.F. Kocks, C.N. Tome, H.R. Wenk, Texture and Anisotropy, Cambridge University Press, Cambridge, 1998.
34. R. Pokharel, L. Balogh, D.W. Brown, B. Clausen, G.T. Gray III, V. Livescu, S.C. Vogel, and S. Takajo, Scripta. Mater., 2018.
35. R. Tandon, T. Wilks, M. Gieseke, C. Noelke, S. Kaierle, and T.A. Palmer, Euro Powder Metallurgy Association (EPMA): AM—Special Processes and Materials Reims, Fr, 2015.
36. D.W. Brown, A. Jain, S.R. Agnew, and B. Clausen: in Twinning and detwinning during cyclic deformation of Mg alloy AZ31B, T. Chandra, K. Tsuzaki, M. Militzer, and C. Ravindran, eds., Thermec 2006, Pts 1-5, 2007, pp. 3407-+.10.4028/0-87849-428-6.3407 ↗
37. M.A.M. Bourke, D.C. Dunand, E. Ustundag, Appl. Phys. A, 2002, vol. A74, pp. S1707-S1709.10.1007/s003390201747 ↗
38. D.W. Brown, M.A.M. Bourke, B. Clausen, D.R. Korzekwa, R.C. Korzekwa, R.J. McCabe, T.A. Sisneros, D.F. Teter (2009) Mater. Sci. Eng. A 512: 67-75.10.1016/j.msea.2009.02.004 ↗
39. Y.S. Touloukian, R.K. Kirby, R.E. Taylor, P.D. Desai, Thermal Expansion: Metallic Elements and Alloys, Plenum Publishing Company, New York, 1975.10.1007/978-1-4757-1622-1 ↗
40. R.B. Vondreele, J.D. Jorgensen, C.G. Windsor, J. App. Crys., 1982, vol. 15, pp. 581-589.10.1107/S0021889882012722 ↗
41. M.R. Daymond, M.A.M. Bourke, R.B. Von Dreele, B. Clausen, T. Lorentzen (1997) J. App. Phys. 82: 1554-62.10.1063/1.365956 ↗
42. M.R. Daymond (2004) J. App. Phys. 96: 4263-4272.10.1063/1.1794896 ↗
43. I.C. Noyan, J.B. Cohen, Residual Stress-Measurement by Diffraction and Interpretation, Springer-Verlag, New York., 1987.
44. G. Ribarik, J. Gubicza, T. Ungar (2004) Mater. Sci. Eng. A 387:343-347.10.1016/j.msea.2004.01.089 ↗
45. T. Ungar, J. Gubicza, G. Ribarik, A. Borbely (2001) J. App. Crys. 34:298-310.10.1107/S0021889801003715 ↗
46. M. Wilkens (1970) Phys. Status Solidi A 2: 359-370.10.1002/pssa.19700020224 ↗
47. E.A. Owen, E.L. Yates, A.H. Sully, Proc. Phys. Soc, 1937, vol. 49, pp. 315.10.1088/0959-5309/49/3/313 ↗
48. I.S. Smirnov, I.S. Monakhov, E.G. Novoselova, A.L. Udovskii, V.P. Kolotushkin (2013) Metally 2014:18-24.
49. S.L. Lu, H.P. Tang, Y.P. Ning, N. Liu, D.H. Stjohn, M. Qian (2015) Metall. Mater. Trans. A 46A:3824-3834.10.1007/s11661-015-2976-3 ↗
50. G.I. Taylor, J. Inst. Met., 1938, vol. 62, pp. 307-324.
51. R.E. Stoller, S.J. Zinkle, J. Nuc. Matl., 2000, vol. 283, pp. 349-352.10.1016/S0022-3115(00)00378-0 ↗
52. MatWeb Material Property Data, http://www.matweb.com, 11-08-16
53. H.J. Frost, M.F. Ashby, Deformation Mechanism Maps, Pergamon Press, Oxford, UK, 1982.
54. A. Cottrell (2009) Philos. Mag. Lett. 89, pp. 19-22.10.1080/09500830802448569 ↗
55. T.A. Saleh, B. Clausen, D.W. Brown, H. Choo, P.K. Liaw, M.A.M. Bourke, S.C. Vogel, R.A. Buchanan, D.L. Klarstrom, MRS Proceedings, 2011, vol. 840, pp. Q7.3.
56. N. Shi, M.A.M. Bourke, J.A. Roberts, J.E. Allison (1997) Metall. Mater. Trans. A 28A:2741-2753.10.1007/s11661-997-0031-8 ↗
57. M.M. Francois, A. Sun, W.E. King, N. Henson, D. Tourret, C.A. Bronkhorst, N.N. Carlson, C.K. Newman, T. Haut, J. Bakosi, J.W. Gibbs, V. Livescu, S.A. Vander Wiel, A. Clarke, M.W. Schraad, T. Blacker, H. Lim, T. Rodgers, S. Owen, F. Abdeljawad, J. Madison, A.T. Anderson, J.L. Fattebert, R.M. Ferencz, N.E. Hodge, S.A. Khairallah, O. Walton (2017) Curr. Opin. Solid State Mater. Sci. 21: 198-206.10.1016/j.cossms.2016.12.001 ↗
58. C.A. Bronkhorst, J.R. Mayeur, V. Livescu, D.W. Brown, G.T.I. Gray, S.A. Vander Wiel, Int. J. Plas., 2018.
59. A. Yadollahi, N. Shamsaei, Y. Hammi, M.F. Horstemeyer (2016) Mater. Sci. Eng. A 657:399-405.10.1016/j.msea.2016.01.067 ↗
60. W.J. Poole, M.F. Ashby, N.A. Fleck (1996) Scripta. Mater. 34:559-564.10.1016/1359-6462(95)00524-2 ↗
61. S.H. Williams, D.W. Brown, B. Clausen, A. Russell, K.A. Gschneidner, Acta Mater., 2014, vol. 70, pp. 307-315.10.1016/j.actamat.2014.01.044 ↗
62. A.F. Padilha, R.L. Plaut, P.R. Rios (2003) ISIJ Int. 43:135-143.10.2355/isijinternational.43.135 ↗
63. WebElements, https://www.webelements.com/iron/physics.html, 6-13-18
64. M.R. Daymond, M. Preuss, B. Clausen (2007) Acta Mater. 55:3089-3102.10.1016/j.actamat.2007.01.013 ↗
65. B. Clausen, M.A.M. Bourke, D.W. Brown, E. Ustundag (2006) Mater. Sci. Eng. A 421:9-14.10.1016/j.msea.2005.10.004 ↗
66. B. Clausen, S.Y. Lee, E. Ustundag, C.P. Kim, D.W. Brown, M.A.M. Bourke, Mater. Sci. Forum, 2002, vol. 404-7, pp. 553-558.10.4028/www.scientific.net/MSF.404-407.553 ↗