Atomic Species Associated with the Portevin–Le Chatelier Effect in Superalloy 718 Studied by Mechanical Spectroscopy
Source abstract
Abstract
In many Ni-based superalloys, dynamic strain aging (DSA) generates an inhomogeneous plastic deformation resulting in jerky flow known as the Portevin--Le Chatelier (PLC) effect. This phenomenon has a deleterious effect on the mechanical properties and, at high temperature, is related to the diffusion of substitutional solute atoms toward the core of dislocations. However, the question about the nature of the atomic species responsible for the PLC effect at high temperature still remains open. The goal of the present work is to answer this important question; to this purpose, three different 718-type and a 625 superalloy were studied through a nonconventional approach by mechanical spectroscopy. The internal friction (IF) spectra of all the studied alloys show a relaxation peak P718 (at 885 K for 0.1 Hz) in the same temperature range, 700 K to 950 K, as the observed PLC effect. The activation parameters of this relaxation peak have been measured, Ea(P718){\thinspace}={\thinspace}2.68{\thinspace}{\textpm}{\thinspace}0.05 eV, $\tau$0{\thinspace}={\thinspace}2{\textperiodcentered}10-15 {\textpm} 1 s as well as its broadening factor $\beta${\thinspace}={\thinspace}1.1. Experiments on different alloys and the dependence of the relaxation strength on the amount of Mo attribute this relaxation to the stress-induced reorientation of Mo-Mo dipoles due to the short distance diffusion of one Mo atom by exchange with a vacancy. Then, it is concluded that Mo is the atomic species responsible for the high-temperature PLC effect in 718 superalloy
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. A.H. Cottrell: Rep. Conf. Strength Solids, Bristol, 1947, pp. 30–36.
2. A.H. Cottrell and M.A. Jaswon: Proc. R. Soc. A, 1949, vol. 199, pp. 104–14.10.1098/rspa.1949.0128 ↗
3. R.W. Hayes and W.C. Hayes: Acta Metall.,1982, vol. 30, pp. 1295–1301.10.1016/0001-6160(82)90148-1 ↗
4. R.W. Hayes: Acta Metall., 1983, vol. 31, pp. 365–71.10.1016/0001-6160(83)90213-4 ↗
5. M.C. Chaturvedi and I.S. Kim: Trans. Jpn. Ins. Met., 1987, vol. 28, pp. 205–12.10.2320/matertrans1960.28.205 ↗
6. V. Shankar, M. Valsan, K. Bhanu Sankara Rao, and S.L. Mannan: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3129–39.10.1007/s11661-004-0057-0 ↗
7. A. Chatterjee, G. Sharma, R. Tewari, and J. Chakravartty: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 1097–1107.10.1007/s11661-014-2717-z ↗
8. K. Gopinath, A.K. Gogia, S.V. Kamat, and U. Ramamurty: Acta Mater., 2009, vol. 57, pp. 1243–53.10.1016/j.actamat.2008.11.005 ↗
9. M. Mazière, J. Besson, S. Forest, B. Tanguy, H. Chalons, and F. Vogel: Eur. J. Comput. Mech., 2008, vol. 17, pp. 761–72.10.3166/remn.17.761-772 ↗
10. R. Sharghi-Moshtaghin and S. Asgari: Mater. Sci. Eng. A, 2008, vol. 486, pp. 376–80.10.1016/j.msea.2007.09.061 ↗
11. H. Dybiec: Arch. Metal. Pol., 1991, vol. 36, pp. 341–52.
12. W. Chen and M.C. Chaturvedi: Mater. Sci. Eng. A, 1997, vol. 229, pp. 163–68.10.1016/S0921-5093(97)00005-1 ↗
13. C.L. Hale, W.S. Rollings, and M.L. Weaver: Mater. Sci. Eng. A, 2001, vol. 300, pp. 153–64.10.1016/S0921-5093(00)01470-2 ↗
14. M.L. Weaver and C.L. Hale: Miner. Met. Mater. Soc., 2001, pp. 421–32.10.7449/2001/Superalloys_2001_421_432 ↗
15. L. Fournier, D. Delafosse, and T. Magnin: Mater. Sci. Eng. A, 2001, vol. 316, pp. 166–73.10.1016/S0921-5093(01)01224-2 ↗
16. V. Garat, J.-M. Cloué, D. Poquillon, and E. Andrieu: J. Nucl. Mater., 2008, vol. 375, pp. 95–101.10.1016/j.jnucmat.2007.10.009 ↗
17. B. Ter-Ovanessian, J. Deleume, J.-M. Cloué, and E. Andrieu: Mater. Sci. Forum, 2008, vols. 595–598, pp. 951–58.10.4028/www.scientific.net/MSF.595-598.951 ↗
18. S.A. Nalawade, M. Sundararaman, R. Kishore, and J.G. Shah: Scripta Mater., 2008, vol. 59, pp. 991–94.10.1016/j.scriptamat.2008.07.004 ↗
19. S. Nalawade, S. Mahadevan, J.B. Singh, K. Ramaswamy, and A. Verma: Miner. Met. Mater. Soc., 2010, pp. 808–23.10.1002/9781118495223.ch62 ↗
20. B. Max, B. Viguier, E. Andrieu, and J.M. Cloue: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5431–41.10.1007/s11661-014-2508-6 ↗
21. Y. Nakada and S. Keh: Acta Metall., 1970, vol. 18, pp. 437–43.10.1016/0001-6160(70)90129-X ↗
22. S. Venkadesan, C. Phaniraj, P.V. Sivaprasad, and P. Rodriguez: Acta Metall., 1992, vol. 40, pp. 569–80.10.1016/0956-7151(92)90406-5 ↗
23. E. Pink: Scripta Metall., 1983, vol. 17, pp. 847–52.10.1016/0036-9748(83)90247-8 ↗
24. A. Nowick and B. Berry: Anelastic Relaxation in Crystalline Solids, Academic Press, New York, NY, 1972.
25. R. Schaller, G. Fantozzi, and G. Gremaud, eds., Mechanical Spectroscopy Q −1. Trans Tech Publications, Uetikon-Zurich, 2001.
26. J. San Juan: Mater. Sci. Forum, 2001, vol. 366, pp. 32–73.10.4028/www.scientific.net/MSF.366-368.32 ↗
27. I. Gutierrez-Urrutia, M.L. Nó, E. Carreño-Morelli, B. Guisolan, R. Schaller, and J. San Juan: Mater. Sci. Eng. A, 2004, vol. 370, pp. 435–39.10.1016/j.msea.2003.07.023 ↗
28. P. Simas, J. SanJuan, and M. Nó: Mater. Sci. Eng. A, 2009, vol. 521, pp. 73–76.10.1016/j.msea.2008.10.063 ↗
29. J. San Juan, P. Simas, T. Schmoelzer, H. Clemens, S. Mayer, and M. Nó: Acta Mater., 2014, vol. 65, pp. 338–50.10.1016/j.actamat.2013.10.075 ↗
30. M. Castillo-Rodríguez, M. Nó, J. Jiménez, O. Ruano, and J. San Juan: Acta Mater., 2016, vol. 103, pp. 46–56.10.1016/j.actamat.2015.09.052 ↗
31. J.W. Brooks and P.J. Bridge: Superalloys. TMS Publisher, Warrendale, PA, 1988, pp. 33–42.10.7449/1988/Superalloys_1988_33_42 ↗
32. A. Oradei-Basile and J.F. Radavich: Superalloys 718, 625 and Various Derivatives, TMS, Warrendale, PA, 1991, pp. 325–35.10.7449/1991/Superalloys_1991_325_335 ↗
33. R. Swalin and A. Martin: J. Met., 1956, vol. 8, pp. 567–72.
34. N. Matan, H. Winand, P. Carter, M. Karunaratne, P. Bogdanoff, and R. Reed: Acta Mater., 1998, vol. 46, pp. 4587–4600.10.1016/S1359-6454(98)00142-6 ↗
35. A. Engström and J. Agren: Z. Met., 1996, vol. 87, pp. 92–97.
36. M. Karunaratne, P. Carter, and R. Reed: Acta Mater., 2001, vol. 49, pp. 861–75.10.1016/S1359-6454(00)00390-6 ↗
37. R.V. Patil: J. Nucl. Mater., 1996, vol. 230, pp. 57–60.10.1016/0022-3115(96)80010-9 ↗
38. M.S.A. Karunaratne and R.C. Reed: Def. Diffus. Forum, 2005, vols. 237–240, pp. 420–25.10.4028/www.scientific.net/DDF.237-240.420 ↗
39. J.R. MacEwan, J.U. MacEwan, and L.Yaffe: Can. J. Chem., 1959, vol. 37, pp. 1629–36.10.1139/v59-237 ↗
40. S. Rothman, L. Nowicki, and G. Murch: J. Phys. F: Met. Phys., 1980, vol. 10, pp. 383–90.10.1088/0305-4608/10/3/009 ↗
41. C.J. Smithels: Metal Reference Book, Metal Powder Industry Federation, Princeton, NJ, 1994.
42. D. Pruthi, M. Anand, and R. Agarwala: J. Nucl. Mater., 1977, vol. 64, pp. 206–10.10.1016/0022-3115(77)90026-5 ↗
43. C. Campbell, W. Boettinger, and U. Kattner: Acta Mater., 2002, vol. 50, pp. 775–92.10.1016/S1359-6454(01)00383-4 ↗
44. Y. Minamino, H. Yoshida, S.B. Jung, K. Hirao, and T. Yamane: Def. Diff. Forum, 1997, vols. 143–147, pp. 257–62.10.4028/www.scientific.net/DDF.143-147.257 ↗
45. V. Divya, S. Balam, U. Ramamurty, and A. Paul: Scripta Mater., 2010, vol. 62, pp. 621–24.10.1016/j.scriptamat.2010.01.008 ↗
46. D. Batist: Internal Friction of Structural Defect in Crystalline Solids, North-Holland Publishing Co., Amsterdam, 1972.
47. M. Weller: Mater. Sci. Forum, 2001, vols. 366–368, pp. 95–140.10.4028/www.scientific.net/MSF.366-368.95 ↗
48. M.S. Blanter, I.S. Golovin, H. Neuhäuser, and H.-R. Sinning: Internal Friction in Metallic Materials: A Handbook, Springer-Verlag, Berlin, 2007.10.1007/978-3-540-68758-0 ↗
49. M.K. Miller, S.S. Babu, and M.G. Burke: Mater. Sci. Eng. A, 2002, vol. 327, pp. 84–88.10.1016/S0921-5093(01)01881-0 ↗
50. P. Gadaud and K. Chakib: Mater. Sci. Forum, 1993, vols. 119–121, pp. 397–400.10.4028/www.scientific.net/MSF.119-121.397 ↗
51. A. Mourisco, N. Baluc, J. Boneville, and R. Schaller: Mater. Sci. Eng. A, 1997, vols. 239–240, pp. 281–86.10.1016/S0921-5093(97)00594-7 ↗
52. H. Numakura, N. Nurita, M. Koiwa, and P. Gadaud: Philos. Mag. A, 1999, vol. 79, pp. 943–53.10.1080/01418619908210341 ↗
53. H. Numakura and K. Nishi: Mater. Sci. Eng. A, 2006, vol. 442, pp. 59–62.10.1016/j.msea.2006.02.217 ↗
54. B. Max: Ph.D. Thesis, University of Toulouse, Toulouse, 2014.
55. A. Jena and M. Chaturvedi: J. Mater. Sci., 1984, vol. 19, pp. 3121–39.10.1007/BF00549796 ↗
56. B. Cao, R. Schaller, W. Benoit, and F. Cosandey: J. Alloys Compd., 1994, vol. 211, pp. 118–23.10.1016/0925-8388(94)90462-6 ↗
57. C. Zener: Phys. Rev., 1947, vol. 71, pp. 34–38.10.1103/PhysRev.71.34 ↗
58. C. Zener: Elasticity and Anelasticity of Metals, University of Chicago Press, Chicago, IL, 1948.
59. L. Usategui, M. Nó, S. Mayer, H. Clemens, and J. San Juan: Mater. Sci. Eng. A, 2017, vol. 700, pp. 495–502.10.1016/j.msea.2017.06.014 ↗
60. M.C. Ball and A.H. Norbury: Physical Data for Inorganic Chemists, Longman, London, 1974.