journal article·2017-11

Relating Residual Stress and Substructural Evolution During Tensile Deformation of an Aluminum-Manganese Alloy

Arijit Lodh, Tawqeer Nasir Tak, Aditya Prakash, P. J. Guruprasad, Christopher Hutchinson, Indradev Samajdar

Publisher page

Abstract

Interrupted tensile tests were coupled with ex situ measurements of residual stress and microtexture. The residual stress quantification involved measurements of six independent Laue spots and conversion of the interplanar spacings to the residual stress tensor. A clear orientation-dependent residual stress evolution emerged from the experiments and the numerical simulations. For the orientations undergoing negligible changes in ρ GND (density of geometrically necessary dislocation), the residual stress developments appeared to be governed by the elastic stiffness of the grain clusters. For the others, the evolution of the residual stress and ρ GND exhibited a clear orientation-dependent scaling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (84)

Show source-provided references
1. Bert Verlinden, Julian Driver, Indradev Samajdar and Roger D Doherty: Thermo-mechanical processing of metallic materials. (Elsevier, Oxford , 2007).
2. MR Staker and DL Holt, Acta Metallurgica 1972, vol. 20, pp. 569-579.10.1016/0001-6160(72)90012-0 ↗
3. Ladislas P Kubin, Materials science and technology 1993, vol. 6, pp. 137-190.
4. LP Kubin, C Fressengeas and G Ananthakrishna, Dislocations in solids 2002, vol. 11, pp. 101-192.10.1016/S1572-4859(02)80008-0 ↗
5. Yves Brechet and Christopher Hutchinson, Solid State Physics 2006, vol. 60, pp. 181-287.10.1016/S0081-1947(06)80004-4 ↗
6. Frederick John Humphreys and Max Hatherly: Recrystallization and related annealing phenomena. (Elsevier, Oxford, 1995).
7. Niels Hansen, X. Huang and D. A. Hughes, Materials Science and Engineering: A 2001, vol. 317, pp. 3-11.10.1016/S0921-5093(01)01191-1 ↗
8. D. A. Hughes, Materials Science and Engineering: A 2001, vol. 319–321, pp. 46-54.10.1016/S0921-5093(01)01028-0 ↗
9. MF Ashby, Philosophical Magazine 1970, vol. 21, pp. 399-424.10.1080/14786437008238426 ↗
10. GE Dieter, DJ Bacon: Mechanical metallurgy. (McGraw-Hill, New York, 1986).
11. B.D. Cullity (1978) Elements of ray diffraction. Wesley Publishing, USA
12. Viktor Hauk: Structural and residual stress analysis by nondestructive methods: Evaluation-Application-Assessment. (Elsevier, Oxford, 1997).
13. IC Noyan, JB Cohen, Residual stress: measurement by diffraction and interpretation. Springer, New York, 2013.
14. MN James, DJ Hughes, Z Chen, H Lombard, DG Hattingh, D Asquith, JR Yates and PJ Webster, Engineering Failure Analysis 2007, vol. 14, pp. 384-395.10.1016/j.engfailanal.2006.02.011 ↗
15. U Lienert, MC Brandes, JV Bernier, J Weiss, SD Shastri, MJ Mills and MP Miller, Materials Science and Engineering: A 2009, vol. 524, pp. 46-54.10.1016/j.msea.2009.06.047 ↗
16. U Lienert, T-S Han, J Almer, PR Dawson, T Leffers, L Margulies, Søren Fæster Nielsen, HF Poulsen and Søren Schmidt, Acta materialia 2004, vol. 52, pp. 4461-4467.10.1016/j.actamat.2004.05.051 ↗
17. L Margulies, T Lorentzen, HF Poulsen and T Leffers, Acta Materialia 2002, vol. 50, pp. 1771-1779.10.1016/S1359-6454(02)00028-9 ↗
18. MP Miller, J-S Park, PR Dawson and T-S Han, Acta materialia 2008, vol. 56, pp. 3927-3939.10.1016/j.actamat.2008.04.062 ↗
19. Charles S. Montross, Tao Wei, Lin Ye, Graham Clark and Yiu-Wing Mai, International Journal of Fatigue 2002, vol. 24, pp. 1021-1036.10.1016/S0142-1123(02)00022-1 ↗
20. H Mughrabi, Acta metallurgica 1983, vol. 31, pp. 1367-1379.10.1016/0001-6160(83)90007-X ↗
21. T Nakamura and S Suresh, Acta Metallurgica et Materialia 1993, vol. 41, pp. 1665-1681.10.1016/0956-7151(93)90186-V ↗
22. J. Oddershede, S. Schmidt, HF Poulsen, L Margulies, J Wright, M Moscicki, W Reimers, G Winther, Mater. Charact. 2011, vol. 62, pp. 651-66010.1016/j.matchar.2011.04.020 ↗
23. J. Oddershede, S. Schmidt, HF Poulsen, HO Sørensen, J. Wright, W. Reimers, J. Appl. Crystallogr. 2010, vol. 43, pp. 539-549.10.1107/S0021889810012963 ↗
24. H Oettel and R Wiedemann, Surface and coatings technology 1995, vol. 76, pp. 265-273.10.1016/0257-8972(95)02581-2 ↗
25. P. Peyre, R. Fabbro, P. Merrien and H. P. Lieurade, Materials Science and Engineering: A 1996, vol. 210, pp. 102-113.10.1016/0921-5093(95)10084-9 ↗
26. SK Shekhawat, R Chakrabarty, V Basavaraj, VD Hiwarkar, KV Mani, PJ Guruprasad, AA Benzerga, KG Suresh and I Samajdar, Acta Materialia 2015, vol. 84, pp. 256-264.10.1016/j.actamat.2014.10.042 ↗
27. PA Turner and CN Tomé, Acta Metallurgica et Materialia 1994, vol. 42, pp. 4143-4153.10.1016/0956-7151(94)90191-0 ↗
28. T Ungar, H Mughrabi, D Rönnpagel and M Wilkens, Acta Metallurgica 1984, vol. 32, pp. 333-342.10.1016/0001-6160(84)90106-8 ↗
29. G. Van Boven, W. Chen and R. Rogge, Acta Materialia 2007, vol. 55, pp. 29-42.10.1016/j.actamat.2006.08.037 ↗
30. Y-D Wang, H Tian, AD Stoica, X-L Wang, PK Liaw, JW Richardson, Nature Materials 2003, vol. 2, pp. 101-106.10.1038/nmat812 ↗
31. G. A. Webster and A. N. Ezeilo, International Journal of Fatigue 2001, vol. 23, Supplement 1, pp. 375-383.10.1016/S0142-1123(01)00133-5 ↗
32. U Wiklund, J Gunnars and S Hogmark, Wear 1999, vol. 232, pp. 262-269.10.1016/S0043-1648(99)00155-6 ↗
33. H.-A. Crostack and W. Reimers: International Conference on Residual Stresses, Springer. 1989. pp. 58–64.10.1007/978-94-009-1143-7_7 ↗
34. W Reimers, H-A Crostack, M Wrobel and G Eckold, In Measurement of residual and applied stress using neutron diffraction, (Springer, New York, 1992), pp 263-276.10.1007/978-94-011-2797-4_17 ↗
35. Haël Mughrabi, Revue de physique appliquée 1988, vol. 23, pp. 367-379.10.1051/rphysap:01988002304036700 ↗
36. Yu Estrin, LS Toth, A Molinari and Y Brechet, Acta materialia 1998, vol. 46, pp. 5509-5522.10.1016/S1359-6454(98)00196-7 ↗
37. LE Levine, BC Larson, W Yang, ME Kassner, JZ Tischler, MA Delos-Reyes, RJ Fields, W. Liu, Nature Mater. 2006, vol. 5, pp. 619-622.10.1038/nmat1698 ↗
38. H Biermann, T Ungar, T Pfannenmüller, G Hoffmann, A Borbely and H Mughrabi, Acta metallurgica et materialia 1993, vol. 41, pp. 2743-2753.10.1016/0956-7151(93)90143-G ↗
39. F. Corvasce, P. Lipinski and M. Berveiller: International Conference on Residual Stresses, Springer, 1989. pp. 535–541.10.1007/978-94-009-1143-7_89 ↗
40. Bjørn Clausen, T Lorentzen and T Leffers, Acta Materialia 1998, vol. 46, pp. 3087-3098.10.1016/S1359-6454(98)00014-7 ↗
41. L.N. Brewer, D.P. Field, and C.C. Merriman: in Electron Backscatter Diffraction in Materials Science, J.A. Schwartz, K. Mukul, A.L. Brent, and F.P. David, eds., Springer, Boston, 2009, pp. 251–62.10.1007/978-0-387-88136-2_18 ↗
42. M Kamaya, AJ Wilkinson and JM Titchmarsh, Nucl. Eng. Des. 2005, vol. 235, pp. 713-725.10.1016/j.nucengdes.2004.11.006 ↗
43. AJ Wilkinson and DJ Dingley, Acta Metallurgica et Materialia 1991, vol. 39, pp. 3047-3055.10.1016/0956-7151(91)90037-2 ↗
44. J. Jiang, T.B. Britton and A.J. Wilkinson, Acta Materialia 2013, vol. 61, pp. 5895-5904.10.1016/j.actamat.2013.06.038 ↗
45. J. Jiang, TB Britton, AJ Wilkinson, Acta Materialia 2015, vol. 94, pp. 193-204.10.1016/j.actamat.2015.04.031 ↗
46. J. Jiang, TB Britton, AJ Wilkinson, Int. J. Plast 2015, vol. 69, pp. 102-117.10.1016/j.ijplas.2015.02.005 ↗
47. R Dupke and W Reimers, Zeitschrift für Metallkunde 1995, vol. 86, pp. 665-670.
48. U. Welzel, J. Ligot, P. Lamparter, A. C. Vermeulen and E. J. Mittemeijer, Journal of Applied Crystallography 2005, vol. 38, pp. 1-29.10.1107/S0021889804029516 ↗
49. D. Kohli, R. Rakesh, V. P. Sinha, G. J. Prasad and I. Samajdar, Journal of Nuclear Materials 2014, vol. 447, pp. 150-159.10.1016/j.jnucmat.2014.01.002 ↗
50. J. Peng, V. Ji, W. Seiler, A. Tomescu, A. Levesque and A. Bouteville, Surface and Coatings Technology 2006, vol. 200, pp. 2738-2743.10.1016/j.surfcoat.2004.12.018 ↗
51. GE Dieter, D. Bacon: Mechanical Metallurgy. McGraw-Hill, New York, 1986.
52. SI Wright, MM Nowell, DP Field, Microscopy and Microanalysis 2011, vol. 17, pp. 316-329.10.1017/S1431927611000055 ↗
53. JF Nye, Acta Metallurgica 1953, vol. 1, pp. 153-162.10.1016/0001-6160(53)90054-6 ↗
54. DP Field, PB Trivedi, SI Wright and M Kumar, Ultramicroscopy 2005, vol. 103, pp. 33-39.10.1016/j.ultramic.2004.11.016 ↗
55. UF Kocks and H Mecking, Progress in Materials Science 2003, vol. 48, pp. 171-273.10.1016/S0079-6425(02)00003-8 ↗
56. SK Shekhawat, V Basavaraj, VD Hiwarkar, R Chakrabarty, J Nemade, PJ Guruprasad, KG Suresh, RD Doherty and I Samajdar, Metallurgical and Materials Transactions A 2014, vol. 45, pp. 3695-3698.10.1007/s11661-014-2342-x ↗
57. N Keskar, S Mukherjee, KV ManiKrishna, D Srivastava, GK Dey, P Pant, RD Doherty, I Samajdar, Acta Materialia, 2014, vol. 69, pp. 265-274.10.1016/j.actamat.2014.01.023 ↗
58. ACE Reid, RC Lua, RE García, VR Coffman, SA Langer, Int. J. Mater. Product Technol 2009, vol. 35, pp. 361-373.10.1504/IJMPT.2009.025687 ↗
59. N Rajmohan, Y Hayakawa, JA Szpunar and JH Root, Acta Materialia 1997, vol. 45, pp. 2485-2494.10.1016/S1359-6454(96)00371-0 ↗
60. JS Kallend and YC Huang, Metal Science 1984, vol. 18, pp. 381-386.10.1179/030634584790419890 ↗
61. J. Hirsch and K. Lücke, Acta Metallurgica 1988, vol. 36, pp. 2863-2882.10.1016/0001-6160(88)90172-1 ↗
62. A. Albou, S Raveendra, P Karajagikar, I. Samajdar, C Maurice, JH Driver, Scripta Mater. 2010, vol. 62, pp. 469-472.10.1016/j.scriptamat.2009.12.012 ↗
63. RD Doherty, DA Hughes, FJ Humphreys, JJ Jonas, DJ Jensen, ME Kassner, WE King, TR McNelley, HJ McQueen, AD Rollett, Materials Science and Engineering: A 1997, vol. 238, pp. 219-274.10.1016/S0921-5093(97)00424-3 ↗
64. Roger D. Doherty: Progress in Materials Science 1997, vol. 42, pp. 39-58.10.1016/S0079-6425(97)00007-8 ↗
65. BJ Duggan, K Lücke, G Köhlhoff and CS Lee, Acta Metallurgica et Materialia 1993, vol. 41, pp. 1921-1927.10.1016/0956-7151(93)90211-A ↗
66. D Juul Jensen, Scripta Metallurgica et Materialia 1992, vol. 27, pp. 533-538.10.1016/0956-716X(92)90335-C ↗
67. AA Ridha and WB Hutchinson, Acta Metallurgica 1982, vol. 30, pp. 1929-1939.10.1016/0001-6160(82)90033-5 ↗
68. I Samajdar and RD Doherty, Acta Materialia 1998, vol. 46, pp. 3145-3158.10.1016/S1359-6454(97)00492-8 ↗
69. HE Vatne, R Shahani and E Nes, Acta Materialia 1996, vol. 44, pp. 4447-4462.10.1016/1359-6454(96)00077-8 ↗
70. PJ Guruprasad and AA Benzerga, Journal of the Mechanics and Physics of Solids 2008, vol. 56, pp. 132-156.10.1016/j.jmps.2007.03.009 ↗
71. MG Lee, H Lim, BL Adams, JP Hirth and RH Wagoner, International Journal of Plasticity 2010, vol. 26, pp. 925-938.10.1016/j.ijplas.2009.11.004 ↗
72. M Arul Kumar and Sivasambu Mahesh, International Journal of Plasticity 2012, vol. 36, pp. 15-33.10.1016/j.ijplas.2012.03.008 ↗
73. F Roters, D Raabe and G Gottstein, Computational Materials Science 1996, vol. 7, pp. 56-62.10.1016/S0927-0256(96)00060-2 ↗
74. PJ Guruprasad, WJ Carter and AA Benzerga, Acta Materialia 2008, vol. 56, pp. 5477-5491.10.1016/j.actamat.2008.07.019 ↗
75. ZQ Wang and IJ Beyerlein, International Journal of Plasticity 2011, vol. 27, pp. 1471-1484.10.1016/j.ijplas.2010.08.011 ↗
76. Erik Van der Giessen and Alan Needleman, Modelling and Simulation in Materials Science and Engineering 1995, vol. 3, p. 689.10.1088/0965-0393/3/5/008 ↗
77. L.P. Kubin, G. Canova, M. Condat, B. Devincre, V. Pontikis, and Y. Bréchet: Solid State Phenomena (Trans Tech Publ, San Diego, 1992), pp 455-472.
78. HM Zbib, M. Rhee, JP Hirth, International Journal of Mechanical Sciences 1998, vol. 40, pp. 113-127.10.1016/S0020-7403(97)00043-X ↗
79. A. Arsenlis, W. Cai, M. Tang, M. Rhee, T. Oppelstrup, G. Hommes, TG Pierce, VV Bulatov, Model. Simul. Mater. Sci. Eng. 2007, vol. 15, p. 553.10.1088/0965-0393/15/6/001 ↗
80. AA Benzerga, Y Bréchet, A Needleman and E Van der Giessen, Modelling and Simulation in Materials Science and Engineering 2003, vol. 12, p. 159.10.1088/0965-0393/12/1/014 ↗
81. HHM Cleveringa, E Vander Giessen and A Needleman, Philosophical Magazine A 1999, vol. 79, pp. 893-920.10.1080/01418619908210338 ↗
82. P. J. Guruprasad and A. A. Benzerga, Philosophical Magazine 2008, vol. 88, pp. 3585-3601.10.1080/14786430802446666 ↗
83. I. Samajdar, RD Doherty, Scripta Metall. Mater. 1995, vol. 32, pp. 845-850.10.1016/0956-716X(95)93212-M ↗
84. BB He: Two-dimensional X-ray diffraction. (Wiley, New York, 2011).