journal article·2017-05

Continuous Measurements of Recrystallization and Grain Growth in Cobalt Super Alloys

Mahsa Keyvani, Thomas Garcin, Damien Fabrègue, Matthias Militzer, Kenta Yamanaka, Akihiko Chiba

Publisher page

Abstract

L605 (20Cr-15W-10Ni wt pct) and CCM (28Cr-6Mo wt pct) cobalt-based superalloys are candidates for a wide range of applications, from gas turbine components to biomedical implants. Attention is currently focused on the optimization of grain structure as an appropriate approach to increase yield stress without affecting significantly the ductility. In this study, the Laser Ultrasonics for Metallurgy (LUMet) technology is used to examine in situ the evolution of the mean grain size associated with recrystallization and grain growth during heat treatments from the cold-rolled state. The recrystallization process is completed at 1373 K (1100 °C) for L605 and 1273 K (1000 °C) for CCM. The subsequent grain growth rate in L605 is larger compared to CCM. Continuous measurements of the grain size evolution are found to be consistent with grain growth affected by solute drag. Through in situ measurements, the laser ultrasonic technology significantly accelerates the determination of metallurgical parameters allowing for fast optimization of process parameters required to meet specific applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. D. Coutsouradis, A. Davin and M. Lamberigts, Mater. Sci. Eng. 1987, vol. 88, pp. 11–19.10.1016/0025-5416(87)90061-9 ↗
2. J.E. Restall and D.J. Stephenson, Mater. Sci. Eng. A, 1987, vol. 88, pp. 273–82.10.1016/0025-5416(87)90095-4 ↗
3. R. Balcon, R. Beyar, S. Chierchia, I. De Scheerder, P.G. Hugenholtz, F. Kiemeneij, B. Meier, J. Meyer, J.P. Monassier, and W. Wijns: Eur. Heart J., 1997, vol. 18, pp. 1536–47.10.1093/oxfordjournals.eurheartj.a015133 ↗
4. F. Etave, G. Finet, M. Boivin, J.C. Boyer, G. Rioufol and G. Thollet, J. Biomech., 2001, vol. 34, pp. 1065-75.10.1016/S0021-9290(01)00026-4 ↗
5. J. Favre, D. Fabrègue, A. Chiba and E. Maire, Philos. Mag. A, 2014, vol. 94, pp. 1992-2008.10.1080/14786435.2014.903342 ↗
6. P. S. Kotval, Metallography, 1969, vol. 1, pp. 251–85.10.1016/0026-0800(69)90038-X ↗
7. J. R. Davis, ASM Specialty Handbook, Nickel, Cobalt, And their Alloys, ASM International, Materials Park, OH, 2000.
8. K.P. Gupta, J. Phase Equilib. Diffus. Diff., 2006, vol. 27, pp. 178-83.10.1007/BF02736464 ↗
9. C.T. Sims, N.S. Stoloff and W.C. Hagel, Superalloys ΙΙ: High-Temperature Materials for Aerospace and Industrial Power, 2nd ed., Wiley-Interscience, New York, NY, 1987.
10. A. Chiba, K. Kumagai, N. Nomura and S. Miyakawa, Acta Mater., 2007, vol. 55, pp. 1309-1318.10.1016/j.actamat.2006.10.005 ↗
11. A. Chiba, N. Nomura and Y. Ono, Acta Mater., 2007, vol. 55, pp. 2119-28.10.1016/j.actamat.2006.10.060 ↗
12. K. Yamanaka, M. Mori, and A. Chiba, Mater. Sci. Eng. A, 2001, vol. 538, pp. 5961-66.
13. M. Dubois, A. Moreau, M. Militzer, and J.F. Bussière: in Proceedings of 3rd International Conference on Grain Growth, 1998, pp. 593–98.
14. S. Kruger, G. Lamouche, and J. P. Monchalin, Iron Steel Technol., 2005, vol. 2, pp. 25-31.
15. S. Sarkar, A. Moreau, M. Militzer and W. Poole, Metall. Mater. Trans. A, 2008, vol. 39A, pp. 897-907.10.1007/s11661-007-9461-6 ↗
16. B.W. Krakauer and A. Moreau: in Proceedings of International Symposium on Advanced Sensors for Metals, 1999, pp. 41–52.
17. M. Militzer, T. Garcin and W. J. Poole, Mater. Sci. Forum, 2013, vol. 753, pp. 25-30.10.4028/www.scientific.net/MSF.753.25 ↗
18. S. Sundin and D. Artymowicz, Metall. Mater. Trans. A, 2002, vol. 33A, pp. 687-91.10.1007/s11661-002-0131-4 ↗
19. M. Maalekian, R. Radis, M. Militzer, A. Moreau and W. J. Poole, Acta Mater., 2012, vol. 60, pp. 1015-25.10.1016/j.actamat.2011.11.016 ↗
20. T. Garcin, J.H. Schmitt, and M. Militzer: in Proceedings of Eurosuperalloys, 2014, pp. 5–10.
21. T. Garcin, J.H. Schmitt and M. Militzer, J. Alloys Compd., 2016, vol. 670, pp. 329-36.10.1016/j.jallcom.2016.01.222 ↗
22. S.E. Kruger, A. Moreau, C. Bescond, and J.P. Monchalin: in Proceedings of 16th Conference on Non-destructive Testing, 2004, CD-ROM ICNDT.
23. T. Garcin, CTOME V1.55: Software for the analysis of ultrasound wave properties in metal. www.ctome.org.
24. S.I. Wright, M.M. Nowell, and D.P. Field, Microsc. Microanal., 2011, vol. 17, pp. 316-29.10.1017/S1431927611000055 ↗
25. V. Randle, Interface Sci., 2002, vol. 10, pp. 271-77.10.1023/A:1020877528820 ↗
26. M.H. Alvi, S.W. Cheong, J.P. Suni, H. Weiland and A.D. Rollett, Acta Mater., 2008, vol. 56, pp. 3098-108.10.1016/j.actamat.2008.02.037 ↗
27. A.K. Giumelli, M. Militzer and E.B. Hawbolt, ISIJ Int., 1999, vol. 39, pp. 271-80.10.2355/isijinternational.39.271 ↗
28. J. Rudnizki, B. Zeislmair, U. Prahl and W. Bleck, Comput. Mater. Sci., 2010, vol. 49, pp. 209-16.10.1016/j.commatsci.2010.04.015 ↗
29. J.D. Aussel and J.P. Monchalin, J. Appl. Phys., 1989, vol. 65, pp. 2918-22.10.1063/1.342738 ↗
30. H. Ogi, H. Ledbetter and S. Kim, Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1671–77.10.1007/s11661-001-0145-3 ↗
31. A. Granato and K. Lucke, J. Appl. Phys., 1956, vol. 27, pp. 583–93.10.1063/1.1722436 ↗
32. V.F. Coronel and D.N. Beshers, J. Appl. Phys., 1988, vol. 64, pp. 2006–015.10.1063/1.341757 ↗
33. A. Moreau, M. Lord, D. Lévesque, M. Dubois and J. F. Bussière, J. Alloys Compd., 2000, vol. 310, pp. 427-31.10.1016/S0925-8388(00)00977-4 ↗
34. M. Dubois, M. Militzer, A. Moreau and J. F. Bussière, Scripta Mater., 2000, vol. 42, pp. 867-74.10.1016/S1359-6462(00)00305-5 ↗
35. F.E. Stanke and G.S. Kino, J. Acoust. Soc. Am., 1984, vol. 75, pp. 665-81.10.1121/1.390577 ↗
36. D. Nicoletti, N. Bilgutay and B. Onaral, J. Acoust. Soc. Am., 1992, vol. 91, pp. 3278–84.10.1121/1.402862 ↗
37. E.P. Papadakis, J. Acoust. Soc. Am., 1965, vol. 37, pp. 711–17.10.1121/1.1909401 ↗
38. A.B. Bhatia, J. Acoust. Soc. Am., 1959, vol. 31, pp. 16–23.10.1121/1.1907605 ↗
39. S. Hirsekorn, J. Acoust. Soc. Am., 1982, vol. 72, pp. 1021–31.10.1121/1.388233 ↗
40. J. A. Turner, J. Acoust. Soc. Am., 1999, vol. 106, pp. 541–52.10.1121/1.427024 ↗
41. T. Williams and C. Kelley: Gnuplot 4.6: An interactive plotting program, 2014.
42. ASTM E112-12: Standard Test Methods for Determining Average Grain Size, ASTM International, West Conshohocken, PA, 2013.
43. S. Shahandeh, M. Greenwood, and M. Militzer, Model. Simul. Mater. Sci. Eng., 2012, vol. 20, pp. 65008-028.10.1088/0965-0393/20/6/065008 ↗
44. N. Yukawa, and K. Sato, Trans. Jpn. Inst. Met., 1968, vol. 9, pp. 680-86.10.2320/matertrans1960.9.372 ↗
45. K. Ueki, K. Ueda, and T. Narushima, Key Eng. Mater., 2014, vol. 616, pp. 258-62.10.4028/www.scientific.net/KEM.616.258 ↗
46. S. Mineta, Alfirano, S. Namba, T. Yoneda, K. Ueda, and T. Narushima, Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3351-58.10.1007/s11661-012-1142-4 ↗