journal article·2017-03

Corrosion Behavior of Top and Bottom Surfaces for Single-Side and Double-Side Friction Stir Welded 7085-T7651 Aluminum Alloy Thick Plate Joints

Weifeng Xu, Wei Zhang, Xiaoli Wu

Publisher page

Abstract

Thick plate joints of 7085-T7451 aluminum alloy were obtained through both single-side and double-side friction stir welding (SS or DS-FSW). The chloride ions effects on the corrosion behavior of the top and bottom surfaces of the joints were examined by cyclic potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). Results show that the corrosion susceptibility was suppressed significantly in the weld nugget zone, while the base material and heat-affected zone were prone to be corrosion attacked. For the SS-FSWed joint, the top surface showed a higher corrosion resistance than that of the bottom surface, but the larger corrosive heterogeneity was observed between the top and bottom surfaces compared with the two welds of DS-FSWed joint, which was confirmed by the morphology of corrosion attack. A deep insight on the microstructure of the joints indicates that the intermetallic particles played a key role in the corrosion behavior of the FSWed AA7085 aluminum alloy joints in chloride solution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. T. Dursuna and C. Soutisb: Mater. Design, 2014, vol. 56, pp. 862–71.10.1016/j.matdes.2013.12.002 ↗
2. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
3. A. Orozco-Caballero, P. Hidalgo-Manriquea, C.M. Cepeda-Jiméneza, P. Reyb, D. Verderab, O.A. Ruanoa, and F. Carreñoa: Mater. Charact., 2016, vol. 112, pp. 197–205.10.1016/j.matchar.2015.12.014 ↗
4. W.F. Xu and J.H. Liu: Trans. Nonferrous Met. Soc. China, 2015, vol. 25, pp. 3212–22.10.1016/S1003-6326(15)63954-1 ↗
5. M. Cabibbo, A. Forcellese, M.E. Mehtedi, and M. Simoncini: Mater. Sci. Eng. A, 2014, vol. 590, pp. 209–17.10.1016/j.msea.2013.10.031 ↗
6. Z.H. Zhang, W.Y. Li, Y. Feng, J.L. Li, and Y.J. Chao: Acta Mater., 2015, vol. 92, pp. 117–25.10.1016/j.actamat.2015.03.054 ↗
7. B. Li, Y.F. Shen, and W.Y. Hu: Mater. Design, 2012, vol. 32, pp. 3796–802.10.1016/j.matdes.2011.03.029 ↗
8. B. Li, Y.F. Shen, and W.Y. Hu: Mater. Design, 2011, vol. 32, pp. 2073–84.10.1016/j.matdes.2010.11.054 ↗
9. A.A. Zadpoor, J. Sinke, and R. Benedictus: Metall. Mater. Trans. A, 2010, vol. 13A, pp. 3365–78.10.1007/s11661-010-0403-3 ↗
10. W.F. Xu, J.H. Liu, G.H. Luan, and C.L. Dong: Mater. Design, 2009, vol. 30, pp. 1886–93.10.1016/j.matdes.2008.09.021 ↗
11. C. Sharma, D.K. Dwivedi, and P. Kumar: Mater. Design, 2014, vol. 642, pp. 334–44.10.1016/j.matdes.2014.07.013 ↗
12. G. D’Urso, C. Giardini, S. Lorenzi, and T. Pastore: J. Mater. Process. Technol., 2014, vol. 214, pp. 2075–84.10.1016/j.jmatprotec.2014.01.013 ↗
13. João C.B. Bertoncello, Sara M. Manhabosco, and Luís F.P. Dick: Corros. Sci., 2015, vol. 94, pp. 359–67.10.1016/j.corsci.2015.02.029 ↗
14. Y. Deng, B. Peng, G.F. Xu, Q.L. Pan, R. Ye, Y.J. Wang, L.Y. Lu, and Z.M. Yin: Corros. Sci., 2015, vol. 100, pp. 57–72.10.1016/j.corsci.2015.06.031 ↗
15. Y. Deng, R. Ye, G.F. Xu, J.D. Yang, Q.L. Pan, B. Peng, X.W. Cao, Y.L. Duan, Y.J. Wang, L.Y. Lu, and Z.M. Yin: Corros. Sci., 2015, vol. 90, pp. 359–74.10.1016/j.corsci.2014.10.036 ↗
16. S.Y. Chen, K.H. Chen, G.S. Peng, X. Liang, and X.H. Chen: Trans. Nonferrous Met. Soc. China, 2012, vol. 22, pp. 47–52.10.1016/S1003-6326(11)61138-2 ↗
17. M. Jariyaboon, A.J. Davenport, R. Ambat, B.J. Connolly, S.W. Williams, and D.A. Price: Corros. Sci., 2007, vol. 49, pp. 877–909.10.1016/j.corsci.2006.05.038 ↗
18. B. Zaid, D. Saidi, A. Benzaid, and S. Hadji: Corros. Sci., 2008, vol. 50, pp. 1841–47.10.1016/j.corsci.2008.03.006 ↗
19. W.F. Xu and J.H. Liu: Corros. Sci., 2009, vol. 51, pp. 2743–51.10.1016/j.corsci.2009.07.004 ↗
20. W.F. Xu, J.H. Liu, and H.Q. Zhu: Electrochim. Acta, 2010, vol. 55, pp. 2918–23.10.1016/j.electacta.2009.12.083 ↗
21. Y. Liu, G.Z. Meng, and Y.F. Cheng: Electrochim. Acta, 2009, vol. 54, pp. 4155–63.10.1016/j.electacta.2009.02.058 ↗
22. P.S. Grant: Prog. Mater. Sci., 1995, vol. 39, pp. 497–545.10.1016/0079-6425(95)00004-6 ↗
23. Z. Szklarska-Smialowska: Corros. Sci., 1999, vol. 41, pp. 1743–67.10.1016/S0010-938X(99)00012-8 ↗
24. A. Berzins, R.T. Lowson, and K.J. Mirans: Aust. J. Chem., 1977, vol. 30, pp. 1891–1903.10.1071/CH9771891 ↗
25. T.L. Metroke, J.S. Gandhi, and A. Apblett: Prog. Org. Coat., 2004, vol. 50, pp. 231–46.10.1016/j.porgcoat.2004.03.001 ↗
26. G.M. Treacy, G.D. Wilcox, and M.O.W. Richardson: Surf. Coat. Technol., 1999, vol. 114, pp. 260–68.10.1016/S0257-8972(99)00053-5 ↗
27. J.T. Zhang, J.M. Hu, J.Q. Zhang, and C.N. Cao: Prog. Org. Coat., 2004, vol. 51, pp. 145–51.10.1016/j.porgcoat.2004.08.001 ↗
28. M.J. Robinson and N.C. Jackson: Corros. Sci., 1999, vol. 41, pp. 1013–28.10.1016/S0010-938X(98)00171-1 ↗
29. M.J. Robinson and N.C. Jackson: Br. Corros. J., 1999, vol. 34, pp. 45–49.10.1179/bcj.1999.34.1.45 ↗
30. M.J. Robinson: Corros. Sci., 1982, vol. 22, pp. 775–90.10.1016/0010-938X(82)90013-0 ↗
31. T. Ramgopal, P.I. Gouma, and G.S. Frankel: Corrosion, 2002, vol. 58, pp. 687–97.10.5006/1.3287699 ↗