journal article·2016-09

Friction Stir Welding of Al Alloy 2219-T8: Part II-Mechanical and Corrosion

Ju Kang, Zhi-Cao Feng, Ji-Chao Li, G. S. Frankel, Guo-Qing Wang, Ai-Ping Wu

Publisher page

Abstract

In Part I of this series, abnormal agglomerations of θ particles with size of about 100 to 1000 µm were observed in friction stir welded AA2219-T8 joints. In this work, the effects of these agglomerated θ particles on the mechanical and corrosion properties of the joints are studied. Tensile testing with in situ SEM imaging was utilized to monitor crack initiation and propagation in base metal and weld nugget zone (WNZ) samples. These tests showed that cracks initiated in the θ particles and at the θ/matrix interfaces, but not in the matrix. The WNZ samples containing abnormal agglomerated θ particles had a similar ultimate tensile stress but 3 pct less elongation than other WNZ samples with only normal θ particles. Measurements using the microcell technique indicated that the agglomerated θ particles acted as a cathode causing the dissolution of adjacent matrix. The abnormal θ particle agglomerations led to more severe localized attack due to the large cathode/anode ratio. Al preferential dissolution occurred in the abnormal θ particle agglomerations, which was different from the corrosion behavior of normal size θ particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. J. Kang, Z.-C. Feng, G.S. Frankel, I.W. Huang, G.-Q. Wang, and A.-P. Wu: Metall. Mater. Trans. A, DOI:10.1007/s11661-016-3648-7.10.1007/s11661-016-3648-7 ↗
2. C. Huang and S. Kou: Weld. J., 2000, vol. 79, pp. 113s–20s.
3. J.R. Dawes: Aluminum and Aluminum Alloys, ASM, Materials Park, OH, 1996.
4. A.M. Samuel, J. Gauthier, and F.H. Samuel: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1785–98.10.1007/BF02651928 ↗
5. American society for metals: Metals Handbook, Fractography, 9th ed., vol. 12. ASM, Materials Park, OH, 1987.
6. R. Beygi, M. Kazeminezhad, and A.H. Kokabi: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 361–70.10.1007/s11661-013-1989-z ↗
7. R. Beygi, M. Kazeminezhad, A.H. Kokabi, and A. Loureiro: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2544–53.10.1007/s11661-015-2859-7 ↗
8. E. Lunarska, E. Trela, and Z. Szklarska: Corrosion, 1987, vol. 43, pp. 219–28.10.5006/1.3583140 ↗
9. J.R. Scully, T.O. Knight, and R.G. Buchheit: Corros. Sci., 1993, vol. 35, pp. 185–95.10.1016/0010-938X(93)90148-A ↗
10. C. Luo, X. Zhou, G.E. Thompson, and A.E. Hughes: Corros. Sci., 2012, vol. 61, pp. 35–44.10.1016/j.corsci.2012.04.005 ↗
11. J. Li, N. Birbilis, and R.G. Buchheit: Corros. Sci., 2015, vol. 101, pp. 155–64.10.1016/j.corsci.2015.09.012 ↗
12. O. Schneider, G.O. Ilevbare, J.R. Scully, and R.G. Kelly: J. Electrochem. Soc., 2004, vol. 151B, pp. 465–72.10.1149/1.1764781 ↗
13. G.O. Ilevbare and J.R. Scully: Corrosion, 2001, vol. 57, pp. 134–52.10.5006/1.3290339 ↗
14. G.O. Ilevbare and J.R. Scully: J. Electrochem. Soc., 2001, vol. 148B, pp. 196–207.10.1149/1.1360206 ↗
15. M.B. Vukmirovic, N. Dimitrov, and K. Sieradzki: J. Electrochem. Soc., 2002, vol. 149B, pp. 428–39.10.1149/1.1498258 ↗
16. R. Oltra, B. Malki, and F. Rechou: Electrochim. Acta, 2010, vol. 55, pp. 4536–42.10.1016/j.electacta.2010.03.006 ↗
17. R. Catubig, A.E. Hughes, I.S. Cole, F.F. Chen, C.M. MacRae, N.C. Wilson, A.M. Glenn, B.R.W. Hinton, and M. Forsyth: Corros. Sci., 2015, vol. 95, pp. 22–39.10.1016/j.corsci.2015.01.056 ↗
18. B. Li and Y.F. Shen: Mater. Des., 2011, vol. 31, pp. 3796–802.10.1016/j.matdes.2011.03.029 ↗
19. W. Ward: Proceedings of the 8th International Conference on Trends in Welding Research, ASM, Pine Mountain, 2008.
20. ISO 6892-1: Metallic Materials—Tensile Testing—Part 1: Method of Test at Room Temperature, 2009.
21. T. Suter and H. Bohni. Electrochim. Acta, 2001, vol. 47, pp. 191–99.10.1016/S0013-4686(01)00551-5 ↗
22. J. Kang, Z. Feng, G.S. Frankel, J. Li, G.S. Zou, and A.P. Wu: Corrosion, 2016, vol. 72, pp. 719–31.10.5006/2049 ↗
23. D. Park and J.G. Morris: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 357–64.10.1007/BF02647981 ↗
24. R.N. Codes, O.S. Hopperstad, O. Engler, O.G. Lademo, J.D. Embury, and A. Benallal: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3358–69.10.1007/s11661-011-0749-1 ↗
25. X. Wu, P.A. Kumar, K.G. Lynn, and K.R. Hebert: J. Electrochem. Soc., 1994, vol. 141, pp. 119–24.
26. R.G. Buchheit, R.P. Grant, P.F. Hlava, B. Mckenzie, and G.L. Zender: J. Electrochem. Soc., 1997, vol. 144, pp. 2621–28.10.1149/1.1837874 ↗
27. J. Li, B. Hurley, and R.G. Buchheit: J. Electrochem. Soc., 2015, vol. 162C, pp. 563–71.10.1149/2.0791510jes ↗
28. N. Birbilis, M.K. Cavanaugh, and R.G. Buchheit: Corros. Sci., 2006, vol. 48, pp. 4202–15.10.1016/j.corsci.2006.02.007 ↗
29. R.G. Buchheit, M.A. Martinez, and L.P. Montes: J. Electrochem. Soc., 2000, vol. 147, pp. 119–24.10.1149/1.1393164 ↗
30. J. Li, B. Hurley, and R.G. Buchheit: J. Electrochem. Soc., 2015, vol. 162C, pp. 219–27.10.1149/2.0371506jes ↗
31. P. Schmutz, and G.S. Frankel: J. Electrochem. Soc., 1998, vol. 145, pp. 2295–306.10.1149/1.1838634 ↗
32. P. Leblanc, and G.S. Frankel: J. Electrochem. Soc., 2002, vol. 149B, pp. 239–47.10.1149/1.1471546 ↗
33. S. Lebouil, J. Tardelli, E. Rocca, P. Volovitch, and K. Ogle: Werkst. Korros., 2014, vol. 65, pp. 416–24.10.1002/maco.201307550 ↗
34. J. Kang, R.D. Fu, G.H. Luan, C.L. Dong, and M. He: Corros. Sci., 2010, vol. 52, pp. 620–26.10.1016/j.corsci.2009.10.027 ↗
35. M.K. Cavanaugh, J. Li, N. Birbilis, and R.G. Buchheit: J. Electrochem. Soc., 2014, vol. 161C, pp. 535–43.10.1149/2.0361412jes ↗