journal article·2016-06

Precipitation-Induced Changes in Microstrain and Its Relation with Hardness and Tempering Parameter in 17-4 PH Stainless Steel

S. Mahadevan, R. Manojkumar, T. Jayakumar, C. R. Das, B. P. C. Rao

Publisher page

Abstract

17-4 PH (precipitation hardening) stainless steel is a soft martensitic stainless steel strengthened by aging at appropriate temperature for sufficient duration. Precipitation of copper particles in the martensitic matrix during aging causes coherency strains which improves the mechanical properties, namely hardness and strength of the matrix. The contributions to X-ray diffraction (XRD) profile broadening due to coherency strains caused by precipitation and crystallite size changes due to aging are separated and quantified using the modified Williamson–Hall approach. The estimated normalized mean square strain and crystallite size are used to explain the observed changes in hardness. Microstructural changes observed in secondary electron images are in qualitative agreement with crystallite size changes estimated from XRD profile analysis. The precipitation kinetics in the age-hardening regime and overaged regime are studied from hardness changes and they follow the Avrami kinetics and Wilson’s model, respectively. In overaged condition, the hardness changes are linearly correlated to the tempering parameter (also known as Larson–Miller parameter). Similar linear variation is observed between the normalized mean square strain (determined from XRD line profile analysis) and the tempering parameter, in the incoherent regime which is beyond peak microstrain conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. U.K. Viswanathan, P.K.K. Nayar and R. Krishnan: Mater. Sci. Technol., 1989, vol. 5, pp. 346-49.10.1179/mst.1989.5.4.346 ↗
2. M. Murayama, Y. Katayama and K. Hono: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 345-53.10.1007/s11661-999-0323-2 ↗
3. C.N. Hsiao, C.S. Chiou and J.R. Yang: Mater. Chem. Phys., 2002, vol. 74, pp. 134-42.10.1016/S0254-0584(01)00460-6 ↗
4. M.K. Miller and M.G. Burke: OSTI Identifier-5744797, CONF-910808—2. http://www.osti.gov/scitech/biblio/5744797-characterization-copper-precipitation-ph-steel-combined-apfim-tem-study, 1991.
5. F. Christien, R.L. Gall and G. Saindrenan: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2483-91.10.1007/s11661-003-0008-1 ↗
6. J. Wang, H. Zou, C. Li, R. Zuo, S. Qiu and B. Shen: J. Univ. Sci. Technol. Beijing, 2006, vol. 13, pp. 235-39.10.1016/S1005-8850(06)60050-9 ↗
7. D.K. Bhattacharya, T. Jayakumar, V. Moorthy, S. Vaidyanathan and B. Raj: NDT & E Int., 1993, vol. 26, pp. 141-48.10.1016/0963-8695(93)90600-Y ↗
8. G.K. Williamson and W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22-31.10.1016/0001-6160(53)90006-6 ↗
9. B.E. Warren and B.L. Averbach: J. Appl. Phys., 1952, vol. 23, p. 497.10.1063/1.1702234 ↗
10. D. Balzar and H. Ledbetter: J. Appl. Cryst., 1993, vol. 26, pp. 97-103.10.1107/S0021889892008987 ↗
11. T. Ungár and A. Borbély: Appl. Phys. Lett., 1996, vol. 69, pp. 3173-75.10.1063/1.117951 ↗
12. J.-G. Jung, M. Jung, S.-M. Lee, E. Shin, H.-C. Shin and Y.-K. Lee: J. Alloys Comp., 2013, vol. 553, pp. 299-307.10.1016/j.jallcom.2012.11.108 ↗
13. H. Zhang, M.J. Gorley, K.B. Chong, M.E. Fitzpatrick, S.G. Roberts and P.S. Grant: J. Alloys Comp., 2014, vol. 582, pp. 769-73.10.1016/j.jallcom.2013.08.069 ↗
14. O. Novelo-Peralta, G. González and G.A. Lara-Rodríguez: Mater. Charact., 2008, vol. 59, pp. 773-80.10.1016/j.matchar.2007.06.012 ↗
15. S. Mahadevan, T. Jayakumar, B.P.C. Rao, A. Kumar, K.V. Rajkumar and B. Raj: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1978-84.10.1007/s11661-008-9550-1 ↗
16. S.K. Rai, A. Kumar, V. Shankar, T. Jayakumar, K.B.S. Rao and B. Raj: Scripta Mater., 2004, vol. 51, pp. 59-63.10.1016/j.scriptamat.2004.03.017 ↗
17. T. Ungár and G. Tichy: Phys. Status Solidi A, 1999, vol. 171, pp. 425-34.10.1002/(SICI)1521-396X(199902)171:2<425::AID-PSSA425>3.0.CO;2-W ↗
18. M. Avrami, J. Chem. Phys., 1941, vol. 9, pp. 177-84.10.1063/1.1750872 ↗
19. C.V. Robino, P.W. Hochanadel, G.R. Edwards and M.J. Cieslak: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 697-704.10.1007/BF02665446 ↗
20. E.A. Wilson: Scripta Mater., 1997, vol. 36, pp. 1179-85.10.1016/S1359-6462(97)00006-7 ↗
21. G.K. Wertheim, M.A. Butler, K.W. West and D.N.E. Buchanan: Rev. Sci. Instrum., 1974, vol. 45, pp. 1369-71.10.1063/1.1686503 ↗
22. S.N. Dey, P. Chatterjee and S.P.S. Gupta: Acta Mater., 2003, vol. 51, pp. 4669-77.10.1016/S1359-6454(02)00605-5 ↗
23. U.K. Viswanathan, S. Banerjee and R. Krishnan: Mater. Sci. Eng., A, 1988, vol. 104, pp. 181-89.10.1016/0025-5416(88)90420-X ↗
24. V. Seetharaman, M. Sundararaman and R. Krishnan: Mater. Sci. Eng.,, 1981, vol. 47, pp. 1-11.10.1016/0025-5416(81)90034-3 ↗
25. P.W. Hochanadel, C.V. Robino, G.R. Edwards and M. Cieslak: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 789-98.10.1007/BF02665455 ↗
26. G. Bruno, G. Schumacher, H.C. Pinto and C. Schulze: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 193-97.10.1007/s11661-003-0321-8 ↗
27. S.W. Thompson and G. Krauss: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1573-88.10.1007/BF02649816 ↗
28. T. Ungár: Adv. Eng. Mater., 2003, vol. 5, pp. 323-29.10.1002/adem.200310086 ↗
29. S.K. Ghosh, A. Haldar and P.P. Chattopadhyay: Mater. Sci. Eng., A, 2009, vol. 519, pp. 88-93.10.1016/j.msea.2009.05.013 ↗
30. G.C. Hwang, S. Lee, J.Y. Yoo and W.Y. Choo: Mater. Sci. Eng. A, 1998, vol. 252, pp. 256–68.10.1016/S0921-5093(98)00670-4 ↗
31. K. Huang, N. Wang, Y. Li and K. Marthinsen: Mater. Sci. Eng. A, 2014, vol. 601, pp. 86-96.10.1016/j.msea.2014.02.037 ↗
32. K. Huang, Q. Zhao, Y. Li and K. Marthinsen: J. Mater. Proc. Technol., 2015, vol. 221, pp. 87-99.10.1016/j.jmatprotec.2015.02.016 ↗
33. J.W. Martin: Micromechanisms in particle-hardened alloys, Cambridge University Press, New York, NY, 1980.
34. P. Rozenak: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 41-48.10.1007/s11661-010-0330-3 ↗
35. K.V. Rajkumar, R. Rajaraman, A. Kumar, G. Amarendra, T. Jayakumar, C.S. Sundar, B. Raj and K.K. Ray: Philos. Mag., 2009, vol. 89, p. 1597–610.10.1080/14786430902998111 ↗
36. Z. Guo, W. Sha and D. Li: Mater. Sci. Eng., A, 2004, vol. 373, p. 10–20.10.1016/j.msea.2004.01.040 ↗
37. K.C. Russell and L.M. Brown: Acta Metall., 1972, vol. 20, pp. 969-74.10.1016/0001-6160(72)90091-0 ↗
38. T.Harry and D.J. Bacon: Acta Mater., 2002, vol. 50, pp. 195-208.10.1016/S1359-6454(01)00331-7 ↗
39. M.E. Fine and D. Isheim: Scripta Mater., 2005, vol. 53, p. 115–18.10.1016/j.scriptamat.2005.02.034 ↗
40. H. Mirzadeh and A. Najafizadeh: Mater. Chem. Phys., 2009, vol. 116, pp. 119-24.10.1016/j.matchemphys.2009.02.049 ↗
41. V. Gerold and H. Haberkorn: Phys. Status Solidi, 1966, vol. 16, pp. 675-84.10.1002/pssb.19660160234 ↗
42. E. Hornbogen and R.C. Glenn: Trans. Met. Soc. of. AIME,, 1960, vol. 218, pp. 1064-70.
43. J.H. Hollomon and L.D. Jaffe: Trans. Amer. Inst. Min. Metall. Eng., 1945 vol. 162, pp. 223-49.
44. C. Gomes, A.L. Kaiser, J.P. Bas, A. Aissaoui and M. Piette: Revue de Métallurgie, 2010, vol. 107, pp. 293-302.10.1051/metal/2010061 ↗
45. E. Virtanen, C.J.V. Tyne, B.S. Levy and G. Brada: J. Mater. Process. Technol., 2013, vol. 213, pp. 1364-69.10.1016/j.jmatprotec.2013.03.003 ↗
46. M. Vasudevan, S. Venkadesan, P.V. Sivaprasad and S.L. Mannan: J. Nucl. Mater., 1994, vol. 211, pp. 251-55.10.1016/0022-3115(94)90355-7 ↗
47. J.-H. Shin, J. Jeong and J.-W. Lee: Mat. Char., 2015, vol. 99, pp. 230-37.10.1016/j.matchar.2014.11.024 ↗