Development and Kinetics of TiB2 Layers on the Surface of Titanium Alloy by Superplastic Boronizing
Source abstract
Abstract
The aim of this work is to explore the possibility of combining boronizing and superplastic deformation on titanium alloy (Ti6Al4V) substrate. Superplastic boronizing (SPB) is carried out at three different temperatures of 1173 K, 1223 K, and 1273 K (900 °C, 950 °C, and 1000 °C), and it is held for four different boronizing times of 1, 2, 3, and 6 hours. TiB2 is the only boride compound identified after the boronizing process. Boronized layer thickness in the range of 44.9 ± 1.1 to 149 ± 1 μm is formed on the surface of Ti6Al4V and the surface hardness values increase with respect of the formation’s degree of the hard boronized layer. Diffusion coefficient values attained for all temperatures are (1.44 ± 0.8) × 10−13, (4.1 ± 1.5) × 10−13, and (8.86 ± 4.1) × 10−13 m2 s−1, respectively and the values are higher as compared to other works referred. The activation energy obtained for this process is 226.17 ± 8.3 kJ mol−1. The results obtained suggest that the SPB process provides a more competent and efficient process for the formation of a boronized layer on the alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. [1] T.S.R.C. Murthy, J.K. Sonber, C. Subramanian, R.C. Hubli, N. Krishnamurthy, A.K. Suri, International Journal of Refractory Metals and Hard Materials, 36 (2013) 243-253.10.1016/j.ijrmhm.2012.09.006 ↗
2. [2] G. Zhao, C. Huang, H. Liu, B. Zou, H. Zhu, J. Wang, International Journal of Refractory Metals and Hard Materials, 42 (2014) 36-41.10.1016/j.ijrmhm.2013.10.007 ↗
3. [3] R.G. Munro, Journal of Research of the National Institute of Standards and Technology, 105 (2000) 709-720.10.6028/jres.105.057 ↗
4. [4] S.K. Bhaumik, C. Divakar, A.K. Singh, G.S. Upadhyaya, Materials Science and Engineering: A, 279 (2000) 275-281.10.1016/S0921-5093(99)00217-8 ↗
5. [5] E. Atar, E.S. Kayali, H. Cimenoglu, Surface and Coatings Technology, 202 (2008) 4583-4590.10.1016/j.surfcoat.2008.03.011 ↗
6. [6] F. Li, X. Yi, J. Zhang, Z. Fan, D. Gong, Z. Xi, Acta Metallurgica Sinica (English Letter), 23 (2010) 293-300.
7. [7] S.A. Tsipas, M.R. Vázquez-Alcázar, E.M.R. Navas, E. Gordo, Surface and Coatings Technology, 205 (2010) 2340-2347.10.1016/j.surfcoat.2010.09.026 ↗
8. [8] N.M. Tikekar, K.S. Ravi Chandran, A. Sanders, Scripta Materialia, 57 (2007) 273-276.10.1016/j.scriptamat.2007.03.050 ↗
9. [9] B. Sarma, N.M. Tikekar, K.S. Ravi Chandran, Ceramics International, 38 (2012) 6795-6805.10.1016/j.ceramint.2012.05.077 ↗
10. B. Sarma: Ph.D. Dissertation, University of Utah, 2011.
11. [11] I. Jauhari, H.A.M. Yusof, R. Saidan, Materials Science and Engineering: A, 528 (2011) 8106-8110.10.1016/j.msea.2011.07.054 ↗
12. [12] R. Hasan, I. Jauhari, H. Ogiyama, R.D. Ramdan, Key Engineering Materials, 326-328 (2006) 1233-1236.10.4028/www.scientific.net/KEM.326-328.1233 ↗
13. [13] M. Matsushita, Materials, 4 (2011) 1309.10.3390/ma4071309 ↗
14. [14] N. Ahamad, I. Jauhari, Metall and Mat Trans A, 43 (2012) 5115-5121.10.1007/s11661-012-1357-4 ↗
15. [15] C.H. Xu, J.K. Xi, W. Gao, Scripta Materialia, 34 (1996) 455-461.10.1016/S0956-716X(95)00541-3 ↗
16. M.C. Chaturvedi, Welding and Joining of Aerospace Materials, Elsevier Science, London, 2011.
17. W. Han, K. Zhang, G. Wang, and X. Zhang: J. Mater. Sci. Technol., 2005, vol. 21, pp. 60–62.
18. [18] I. Jauhari, H. Ogiyama, H. Tsukuda, Journal of the Society of Materials Science, Japan, 52 (2003) 154-159.10.2472/jsms.52.6Appendix_154 ↗
19. [19] H.A.M. Yusof, I. Jauhari, S. Rozali, O. Hiroyuki, Key Engineering Materials, 345-346 (2007) 601-604.10.4028/www.scientific.net/KEM.345-346.601 ↗
20. [20] S.A.A. Azis, I. Jauhari, N.R.N. Masdek, N.W. Ahamad, H. Ogiyama, Defect and Diffusion Forum, 297-301 (2010) 227-232.10.4028/www.scientific.net/DDF.297-301.227 ↗
21. A.N. Natali, Dental Biomechanics, CRC Press, Boca Raton, 2003.10.1201/9780203514849 ↗
22. M.J. Donachie, Titanium: A Technical Guide, 2nd Edition, ASM International, Materials Park, 2000.10.31399/asm.tb.ttg2.9781627082693 ↗
23. H.K.D.H. Bhadeshia, Materials Science & Metallurgy, University of Cambridge 27 Charles Babbage Road, Cambridge CB3 0FS, U.K., 2013.