journal article·2016-01Open access

Physical, Thermal, Mechanical Properties, and Microstructural Characterization of Sn-9Zn-XGa Alloys

Tomasz Gancarz

Abstract

Abstract The microstructural features, physicochemical, thermal, and mechanical properties of eutectic SnZn alloys with varying Ga contents were examined in this study. In the microstructure study using scanning electron microscope and X-ray diffraction analysis, intermetallic phases were not observed. The results indicated that the primary effect of Ga was increased mechanical properties. The physicochemical properties of liquid alloys, density, viscosity, and surface tension were measured using the free flow method. The addition of Ga to eutectic SnZn alloy generally reduced density, surface tension, viscosity, and melting point, and increased the coefficient of thermal expansion and electrical resistivity.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. L. Zhang, K.N. Tu, Structure and properties of lead-free solders bearing micro and nano particles, Mater. Scie. Engin. R 82 (2014) 1–3210.1016/j.mser.2014.06.001 ↗
2. Y. Zhang, T. Liang, M.A. Jusheng, Phase diagram calculation on Sn–Zn–Ga solders, J. of Non-Cryst. Solids 336 (2004) 153–15610.1016/j.jnoncrysol.2004.01.013 ↗
3. W-X. Chen, S-B. Xue, H. Wang, Wetting properties and interfacial microstructures of Sn-Zn-xGa solders on Cu substrate, Mater.Design. 31 (2010) 2196–220010.1016/j.matdes.2009.10.053 ↗
4. J.M. Song, N.S. Liu, K-L. Lin, Microstructures, Thermal and Tensile Properties of Sn-Zn-Ga Alloys, Mater. Trans. 45, (2004) 776-78210.2320/matertrans.45.776 ↗
5. H. Ye, S. Xue, J. Luo, Y. Li, Properties and interfacial microstructure of Sn–Zn–Ga solder joint with rare earth Pr addition, Mater. Design. 46 (2013) 816–82310.1016/j.matdes.2012.10.034 ↗
6. T. Gancarz and J. Pstrus: Arch. Metall. Mater. 2015, vol. 60, pp. 1603–0710.1515/amm-2015-0280 ↗
7. T. Gancarz, W. Gasior, H. Henein, The Discharge Crucible Method for Making Measurements of the Physical Properties of Melts: An Overview, Int. J. Thermophys. 35 (2014) 1725–174810.1007/s10765-014-1748-4 ↗
8. T. Gancarz, W. Gasior, H. Henein, Physicochemical Properties of Sb, Sn, Zn, and Sb–Sn System, Int. J. Thermophys. 34 (2013) 250-26610.1007/s10765-013-1407-1 ↗
9. W.R. Gale and T.C. Totemaier, eds.: Smithells Metals Reference Book, Elsevier, Butterworth-Heinemann Ltd., Oxford, 2004.
10. T. Gancarz, J. Pstruś, W. Gąsior, H.Henein, Physicochemical properties of SnZn and SAC + Bi alloys, J. of Electron. Mater. 42 (2013) 288-29310.1007/s11664-012-2336-7 ↗
11. R. Novakovic, D. Zivkovic, Thermodynamics and surface properties of liquid Ga-X (X = Sn, Zn) alloys, J. of Mater. Sci. 40 (2005) 2251–225710.1007/s10853-005-1942-7 ↗
12. W. Gasior, Z. Moser, J. Pstrus, Density and surface tension of the Pb-Sn liquid alloys, J. Phase Equilib. Diff. 22 (2001) 20-2510.1007/s11669-001-0051-9 ↗
13. W. Gasior, Z. Moser, J. Pstrus, and M. Kucharski, Viscosity of the lead-tin liquid alloys, Arch. Metall. Mater. 46 (2001) 23-32
14. SGTE—SGTE alloy phase diagrams, http://www.crct.polymtl.ca/FACT/documentation/SGTE/SGTE_Figs.htm
15. K-I. Chen,S-C. Cheng, S. Wu, K-L. Lin, Effects of small additions of Ag, Al, and Ga on the structure and properties of the Sn–9Zn eutectic alloy, J. Alloys. Comp. 416 (2006) 98–10510.1016/j.jallcom.2005.08.034 ↗
16. T. Gancarz, P. Fima, J. Pstruś, Thermal Expansion, Electrical Resistivity, and Spreading Area of Sn-Zn-In Alloys, J. Mater. Eng. Perform. 5 (2014) 1524-152910.1007/s11665-013-0825-3 ↗
17. W. Osorio, L. Peixoto, L. Garcia, N. Mangelinck-Noël, A. Garcia, Microstructure and mechanical properties of Sn–Bi, Sn–Ag and Sn–Zn lead-free solder alloys, J. Alloy Compd. 572 (2013) 97-10610.1016/j.jallcom.2013.03.234 ↗