Effect of Boron Addition and Initial Heat-Treatment Temperature on Microstructure and Mechanical Properties of Modified 9Cr-1Mo Steels Under Different Heat-Treatment Conditions
Source abstract
Abstract
The effect of initial heat treatment on microstructure and mechanical properties of boron-free and boron-containing modified 9Cr-1Mo steel (P91 and P91B, respectively) has been studied under different heat-treatment conditions. The prior austenite grains evolved in P91 steel, having different prior austenite grain sizes, were found to be similar in size after heat treatment in the range of 1073 K to 1448 K (800 °C to 1175 °C) for 5 minutes. The microstructural evolution in P91B steel having different prior austenite grain sizes appeared to be uniform when subjected to different heat-treatment temperatures with the prior austenite grain size being similar to that of initial grain size. Lath martensite was observed in P91B steel after all heat treatments. On the other hand, lath martensite was observed in P91 steel only when subjected to high-temperature heat treatment, whereas subgrain/substructure as well as coarse precipitates were observed after a lower temperature heat treatment. Large differences in the hardness/strength values between different microstructures corresponding to coarse-grained heat-affected zone (CGHAZ) and intercritical HAZ (ICHAZ) of P91 steel weldment were due to the distinct difference in these microstructures. The difference in hardness/strength values between the CGHAZ and ICHAZ was found to be insignificant in P91B steel under similar heat-treatment conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. T. Kojima, K. Hayashi, and Y. Kajita: ISIJ Int., 1995, vol. 35, pp. 1284-90.10.2355/isijinternational.35.1284 ↗
2. T. Watanabe, M. Tabuchi, M. Yamazaki, H. Hongo, and T. Tanabe: Int. J. Pres. Ves. Pip., 2006, vol. 83, pp. 63-71.10.1016/j.ijpvp.2005.09.004 ↗
3. K. Laha, K.S. Chandravathi, P. Parameswaran, K.B.S. Rao, and S.L. Mannan: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 58-68.10.1007/s11661-006-9050-0 ↗
4. R. Wu, R. Sandstrom, and F. Seitisleam: J. Eng. Mater. Tech., 2004, vol. 126, pp. 87-94.10.1115/1.1631025 ↗
5. G. Eggeler, A. Ramteke, M. Coleman, B. Chew, A. Burblies, G. Peter, J. Hald, C. Jefferey, J. Rantala, M. DeWitte, and R. Mohrmann: Int. J. Pres. Ves. Pip., 1994, vol. 60, pp. 237-57.10.1016/0308-0161(94)90125-2 ↗
6. S.K. Albert, M. Matsui, T. Watanabe, H. Hongo, K. Kubo, and M. Tabuchi: ISIJ Int., 2002, vol. 42, pp. 1497-504.10.2355/isijinternational.42.1497 ↗
7. J. Hald and E.M. Lund: in Int. Conf. on the Joining of Materials JOM-6, O.A. Erhayem, ed., The European Institute for the Joining of Materials, DTU Helsingor, Denmark, 1993, pp. 317–21.
8. H. Cerjak, E. Letofsky, and F. Schuser: Fourth Int. Conf. on Trends in Welding Research, ASM International, Materials Park, OH, 1995, pp. 1633–40.
9. Y. Li, H. Hongo, M. Tabuchi, Y. Takahashi, and Y. Monma: Int. J. Pres. Ves. Pip., 2009, vol. 86, pp. 585-92.10.1016/j.ijpvp.2009.04.008 ↗
10. M. Tabuchi, T. Watanabe, K. Kubo, M. Matsui, J. Kinugawa, and F. Abe: Int. J. Pres. Ves. Pip., 2001, vol. 78, pp. 779-84.10.1016/S0308-0161(01)00090-4 ↗
11. L. Dejun, K. Shinozaki, H. Kuriki, H. Harada, and K. Ohishi: Sci. Technol. Weld. Join., 2003, vol. 8, no. 4, pp. 296-302.10.1179/136217103225005453 ↗
12. D.R. Hayhurst: J. Mech. Phys. Solids, 1972, vol. 20, pp. 381-90.10.1016/0022-5096(72)90015-4 ↗
13. T.H. Hyde, W. Sun, and A.A. Becker: Int. J. Mech. Sci., 2000, vol. 42, pp. 401-23.10.1016/S0020-7403(99)00008-9 ↗
14. F. Abe, M. Tabuchi, M. Kondo, and S. Tsukamoto: Int. J. Pres. Ves. Pip., 2007, vol. 84, pp. 44-52.10.1016/j.ijpvp.2006.09.013 ↗
15. T. Shirane, S. Tsukamoto, K. Tsuzaki, Y. Adachi, T. Hanamura, M. Shimizu, and F. Abe: Sci. Technol. Weld. Join., 2009, vol. 14, pp. 698-707.10.1179/136217109X12505932584853 ↗
16. K. Banerjee, M. Militzer, and M. Perez: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3161-72.10.1007/s11661-010-0376-2 ↗
17. K. Yamada, M. Igarashi, S. Muneki, and F. Abe: ISIJ Int., 2002, vol. 42, pp. 779-84.10.2355/isijinternational.42.779 ↗
18. L. Schafer: J. Nucl. Mater., 1998, vols. 258–263, pp. 1336–39.10.1016/S0022-3115(98)00200-1 ↗
19. P. Mayr, T.A. Palmer, J.W. Elmer, and E.D. Specht: Int. J. Mater. Res., 2008, vol. 99, pp. 381-6.10.3139/146.101649 ↗
20. S.T. Kimmins and D.J. Gooch: 1983, Met. Sci., 1983, vol. 17, pp. 519-32.10.1179/030634583790420484 ↗
21. L.S. Chandravathi, K. Laha, K.B.S. Rao, and S.L. Mannan: Mater Sci. Tech., 2001, vol. 17, pp. 559-65.10.1179/026708301101510212 ↗
22. A.K. Bhaduri, C.R. Das, S.K. Albert, A. Klenk, and B.S. Murty: Mater. Manuf. Proc., 2011, vol. 26, no. 1, pp. 62-5.10.1080/10426910903206725 ↗
23. J. Tarasiuk, P. Gerber, and B. Bacroix: Acta Mater., 2002, vol. 50, pp. 1467-77.10.1016/S1359-6454(02)00005-8 ↗
24. C.R. Das, S.K. Albert, A.K. Bhaduri, and B.S. Murty: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3849-52.10.1007/s11661-011-0941-3 ↗
25. Y.K. Oh, G.S. Kim, and J.E. Indacochea: Scripta Mater., 1999, vol. 41, pp. 7-12.10.1016/S1359-6462(99)00123-2 ↗
26. T.C. Totemeier, H. Tian, and J.A. Simpson: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1519-25.10.1007/s11661-006-0096-9 ↗
27. S. Spigarelli and E. Quadrini: Mater. Des., 2003, vol. 23, pp. 547-52.10.1016/S0261-3069(02)00026-2 ↗
28. C.R. Das, S.K. Albert, J. Swaminathan, S. Raju, A.K. Bhaduri, and B.S. Murty: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3863-6.
29. S.K. Albert, M. Tabuchi, H. Hongo, T. Watanabe, K. Kubo, and M. Matsui: Int. J. Pres. Ves. Pip., 2003, vol. 20, pp. 405-13.10.1016/S0308-0161(03)00072-3 ↗
30. W. Stumpf and K. Banks: Mater. Sci. Eng. A, 2006, vol. 418A, pp. 86-94.10.1016/j.msea.2005.11.020 ↗
31. H. Somekawa and T. Mukai: Scripta Mater., 2005, vol. 53, pp. 1059-64.10.1016/j.scriptamat.2005.07.001 ↗
32. L. Milović, T. Vuherer, M. Zrilić, A. Sedmak, and S. Putić: Mater. Manuf. Proc., 2008, vol. 23, pp. 597-602.10.1080/10426910802160544 ↗
33. C.R. Das, S.K. Albert, A.K. Bhaduri, and B.S. Murty: Mater. Sci. Eng. A, 2002, vol. 552A, pp. 419-26.
34. T. Horiuchi, M. Igarashi, and F. Abe: ISIJ Int., 2002, vol. 42, pp. S67-71.10.2355/isijinternational.42.Suppl_S67 ↗
35. P. Hofer, M.K. Miller, S.S. Babu, S.A. David, and H. Cerjak: ISIJ Int., 2002, vol. 42, pp. 62-6.10.2355/isijinternational.42.Suppl_S62 ↗
36. W. Barrett, G.G. Garrett, and J.V. Bee: Scripta Mater., 1987, vol. 21, pp. 123-8.10.1016/0036-9748(87)90421-2 ↗
37. F. Abe, M. Tabuchi, S. Tsukamoto, and T. Shirane: Int. J. Pres. Ves. Pip., 2010, vol. 87, pp. 598-604.10.1016/j.ijpvp.2010.08.005 ↗