A Novel Method for Direct Synthesis of WC-Co Nanocomposite Powder
Source abstract
Abstract
In this study, a novel method, termed dielectric-barrier-discharge-plasma (DBDP) assisted ball milling and low-temperature carburization, was used to synthesize WC-Co nanocomposite powder. X-ray diffraction, scanning/transmission electron microscopy, and differential scanning calorimetry were used to characterize the microstructure of powders. Starting from W, Co, and graphite powder mixtures, the DBDP-milled W-C-10Co powder exhibited a flakelike morphology with very fine lamellar structure. The WC-Co composite powder was synthesized at 1273 K (1000 °C), which is much lower than the requisite temperature for the conventional carburizing method. The obtained WC-Co composite powder had a nanocomposite microstructure in which fine WC particles were bounded by homogenously distributed Co phase, and the WC crystals had a slablike morphology with a planar size of about 200 nm and <100-nm thickness. The combinational effect of the milling and the plasma in the DBDP milling caused a unique fine flakelike morphology and high-density interfaces in the W-C-10Co powder mixture, which is responsible for the reduced carburization temperature and the nanocomposite structure of WC-Co powder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. V. Richter and M. von Ruthendorf: Int. J. Refract. Met. Hard Mater., 1999, vol. 17, p. 141.10.1016/S0263-4368(99)00003-7 ↗
2. X.L. Shi. G.Q. Shao, X.L. Duan, R.Z. Yuan, and H.H. Lin: Mater. Sci. Eng. A, 2005, vol. 392, p. 335.10.1016/j.msea.2004.09.043 ↗
3. F.L. Zhang, C.Y. Wang, and M. Zhu: Scripta Mater., 2003, vol. 49, p. 1123.10.1016/j.scriptamat.2003.08.009 ↗
4. S. Liu, Z.L. Huang, G. Liu, and G.B. Yang: Int. J. Refract. Met. Hard Mater., 2006, vol. 24, p. 461.10.1016/j.ijrmhm.2005.10.001 ↗
5. P. Seegopaul, L.E. McCandlish, and F.M. Shinneman: Int. J. Refract. Met. Hard Mater., 1997, vol. 15, p. 133.10.1016/S0263-4368(96)00044-3 ↗
6. Z. Zhang, S. Wahlberg, M.S. Wang, and M. Muhammed: Nanostruct. Mater., 1999, vol. 12, p. 163.10.1016/S0965-9773(99)00089-6 ↗
7. Z. Xiong, G.Q. Shao, and X.L. Shi: Int. J. Refract. Met. Hard Mater., 2008, vol. 26, p. 242.10.1016/j.ijrmhm.2007.04.004 ↗
8. F.A. da Costa, F.F.P. de Medeiros, A.G.P. da Silva, U.U. Gomes, M. Filgueira, and C.P. de Souza: Mater. Sci. Eng. A, 2008, vol. 485, p. 638.10.1016/j.msea.2007.08.058 ↗
9. F.L. Zhang, M. Zhu, and C.Y. Wang: Int. J. Refract. Met. Hard Mater., 2008, vol. 26, p. 329.10.1016/j.ijrmhm.2007.08.005 ↗
10. X.M. Ma, L. Zhao, J. Gang, and Y.D. Dong: J. Mater. Sci. Lett., 1997, vol. 16, p. 968.10.1023/B:JMSL.0000044915.69327.d5 ↗
11. M.S. EI-Eskandarany, A.A. Mahday, H.A. Ahmed, and A.H. Amer: J. Alloys Compd., 2000, vol. 312, p. 315.10.1016/S0925-8388(00)01155-5 ↗
12. A.P. Radlinski and A. Calka: Mater. Sci. Eng. A, 1991, vol. 134, p. 1376.10.1016/0921-5093(91)90994-X ↗
13. Calka and D. Wexler: Nature, 2002, vol. 419, p. 147.10.1038/nature00985 ↗
14. N. Mordyuk and G.I. Prokopenko: Ultrasonics, 2004, vol. 42, p. 43.10.1016/j.ultras.2004.01.001 ↗
15. M. Zhu, L.Y. Dai, N.S. Gu, B. Cao, and L.Z. Ouyang: J. Alloys Compd., 2009, vol. 478, p. 624.10.1016/j.jallcom.2008.11.122 ↗
16. M. Zhu and L.Y. Dai: China Patent ZL 200510036231.9, Aug. 29, 2007.
17. H.X. Sui, M. Zhu, G.B. Li, and D.Z. Yang: J. Appl. Phys., 1992, vol. 71, p. 2945.10.1063/1.351028 ↗
18. U. Kogelschatz: IEEE Trans. Plasma Sci., 2002, vol. 30, p. 1400.10.1109/TPS.2002.804201 ↗
19. W.P. Leroy, C. Detavernier, R.L. Van Meirhaeghe, and C. Lavoie: J. Appl. Phys., 2007, vol. 101, p. 053714.10.1063/1.2561173 ↗