journal article·2014-11

Three-Dimensional Characterization of SiC Particle-Reinforced Al Composites Using Serial Sectioning Tomography and Thermo-mechanical Finite Element Simulation

Jai Myun Jung, Ji Hoon Yoo, Hyeok Jae Jeong, Sunghak Lee, Hyoung Seop Kim

Publisher page

Abstract

In this study, a serial sectioning technique was employed in order to visualize the three-dimensional (3D) structure, and to accurately simulate the mechanical and thermal behaviors of SiC particle-reinforced Al composites. Sequential, two-dimensional (2D) optical images of the microstructure were acquired after polishing, and then reconstructed to develop 3D geometries for microstructural analyses and finite element modeling. Experimental compressive and thermal expansion tests were performed for comparison with the finite element method results. The Young’s modulus and thermal expansion coefficient of the composite, predicted using the 3D microstructure-based finite element analyses, were in good agreement with the experimental results. Furthermore, the 3D microstructure-based finite element model showed anisotropic thermal expansion behavior that was previously disregarded in the other models used in this study. Therefore, it was confirmed that the combined approach of serial sectioning and finite element modeling provides a significant improvement over 2D and 3D unit-cell modeling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. W.D. Callister, Jr.: Material Science and Engineering; an Introduction, 2nd edition, John Wiley & Sons Inc., New York, 1991.
2. J.K. Lim, S.Y. Choi, K.H. Choe, S.S. Kim, and G.S. Cho: Korean. J. Met. Mater., 2013, vol. 51, pp. 385-391.10.3365/KJMM.2013.51.10.743 ↗
3. J.S. Kim, K.S. Lee, Y.N. Kwon, Y.S. Lee, S.H. Lee, and Y.W. Chang: Korean J. Met. Mater., 2013, vol. 51, pp. 547-556.10.3365/KJMM.2013.51.7.547 ↗
4. Y.H. Cho, J.M. Lee, H.J. Kim, J.J. Kim, and S.H. Kim: Met. Mater. Int., 2013, vol. 19, pp. 1109-1116.10.1007/s12540-013-5028-9 ↗
5. E.Y. Yoon, D.J. Lee, B.H. Park, M.R. Akbarpour, M. Farvizi, and H.S. Kim: Met. Mater. Int., 2013, vol. 19, pp. 927-932.10.1007/s12540-013-5004-4 ↗
6. J.S. Huang, D.W. Yao, and L. Meng: Met. Mater. Int., 2013, vol. 19, pp. 225-230.10.1007/s12540-013-2015-0 ↗
7. T. Varol, and A. Canakci: Met. Mater. Int., 2013, vol. 19, pp. 1227-1234.10.1007/s12540-013-6014-y ↗
8. J.G. Kim, J.I. Bang, Y.J. Kim, and Y.H. Park: Korean J. Met. Mater., 2013, vol. 51, pp. 857-863.10.3365/KJMM.2013.51.12.857 ↗
9. V.V. Ganesh, and N. Chawla: Mater. Trans., 2003. vol. 35, pp. 53-61.10.1007/s11661-004-0108-6 ↗
10. N.J. Sorensen, S. Suresh, V. Tvergaard, and A. Needleman: Mater. Sci. Eng. A, 1995, vol. 197, pp. 1-10.10.1016/0921-5093(94)09739-9 ↗
11. N. Chawla, and Y.L. Shen: Adv. Eng. Mater., 2001, vol. 3, pp. 357-370.10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
12. L. Wojnar: Image Analysis; Applications in Materials Engineering, CRC Press, Boca Raton, 1999.
13. M.J. Herbert, and C. B. Jones: Comput. Geosci., 2001, vol. 27, pp. 427-440.10.1016/S0098-3004(00)00076-5 ↗
14. M. Yanuka, F.A. Dullien, and D.E. Elrick: J. Microscopy, 1984, vol. 135, pp. 159-168.10.1111/j.1365-2818.1984.tb00516.x ↗
15. J. Alkemper, and P.W. Voorhees: J. Microscopy, 2001, vol. 201, pp. 388-394.10.1046/j.1365-2818.2001.00832.x ↗
16. D. Saraev, and S. Schmauder: Int. J. Plasticity, 2003, vol. 19, pp. 733-747.10.1016/S0749-6419(01)00058-4 ↗
17. M. Li, S. Ghosh, and O. Richmond: Acta. Mater., 1999, vol. 47, pp. 3515-3532.10.1016/S1359-6454(99)00148-2 ↗
18. M.P. Echlin, and T.M. Pollock: Acta Mater., 2013, vol. 61, pp. 5791-5799.10.1016/j.actamat.2013.06.023 ↗
19. J.J. Williams, J. Segurado, J. LLorca, N. Chawla: Mater. Sci. Eng. A, 2012, vol. 557, pp. 113-118.10.1016/j.msea.2012.05.108 ↗
20. T.J. Marrow, M. Mostafavi, T. Hashimoto, and G.E. Thompson: Int. J. Fatigue, 2014, vol. 66, pp. 183-193.10.1016/j.ijfatigue.2014.04.003 ↗
21. N. Michailidis, F. Stergioudi, H. Omar, and D. Tsipas: Comp. Mater. Sci., 2010, vol. 48, pp. 282-286.10.1016/j.commatsci.2010.01.008 ↗
22. A.C. Lewis, and A.B. Geltmacher: Scripta Mater., 2006, vol. 55, pp. 81-85.10.1016/j.scriptamat.2006.01.043 ↗
23. D.J. Rowenhorst, A.C. Lewis, and G. Spanos: Acta Mater., 2010, vol. 58, pp. 5511-5519.10.1016/j.actamat.2010.06.030 ↗
24. G. Spanos, A.B. Geltmacher, A.C. Lewis, J.F. Bingert, M. Mehl, D. Papaconstantopoulos, Y. Mishin, A. Gupta, and P. Matic: Mater. Sci. Eng. A, 2007, vol. 452-453, pp. 558-568.10.1016/j.msea.2006.10.110 ↗
25. N. Chawla, V.V. Ganesh, and B. Wunsch: Scripta Mater., 2004, vol. 51, pp. 161-165.10.1016/j.scriptamat.2004.03.043 ↗
26. P.S. Turner: J. Res. Natl. Bur. Stand., 1946, vol. 37, pp. 239-260.10.6028/jres.037.015 ↗
27. R.A. Schapery: J. Compos. Mater., 1968, vol. 2, pp. 380-404.10.1177/002199836800200308 ↗
28. E.H. Kerner: Proc. Phys. Soc., 1956, vol. B69, pp. 808-813.10.1088/0370-1301/69/8/305 ↗
29. Z. Hashin, and S. Shtrikman: J. Mech. Phys. Solids, 1963, vol. 11, pp. 127-140.10.1016/0022-5096(63)90060-7 ↗
30. H.S. Lee, K.Y. Jeon, H.Y. Kim, and S.H. Hong: J. Mater. Sci., 2000, vol. 35, pp. 6231-6236.10.1023/A:1026749831726 ↗
31. S. Elomari, R. Boukhili, and D.J. Lloyd: Acta Mater., 1996, vol. 44, pp. 1873–82.10.1016/1359-6454(95)00299-5 ↗
32. N. Chawla, X. Deng, and D.R.M. Schnell: Mater. Sci. Eng. A, 2006, vol. 426, pp. 314-322.10.1016/j.msea.2006.04.054 ↗
33. D. Nedelcu, and I. Carcea: Met. Mater. Int., 2013, vol. 19, pp. 105-112.10.1007/s12540-013-1017-2 ↗