Porosity nucleation in metal-matrix composites
Source abstract
Abstract
The mechanism of porosity nucleation in pressure infiltration casting of metal-matrix composites (MMCs) is investigated. Five interfacial configurations are investigated for a variety of matrix/reinforcement systems. Interfaces with negative curvature such as cavity are found to be potential sites for porosity formation. The Al/Al2O3 system is most susceptible to porosity nucleation for the systems considered. Appropriate matrix alloying such as Mg in the Al/Al2O3 system and Mg and Cu in the Al/SiC system and reinforcement coatings such as Cu coating on SiC significantly reduce the contact angle, enhance wettability at the interface, and could be effective for suppressing porosity formation. Other effective methods include careful control of the cooling condition as well as the applied pressure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. T.S. Piwonka and M.C. Flemings: Trans. TMS-AIME, 1966, vol. 236, pp. 1157–65.
2. D.R. Poirier, K. Yeum, and A.L. Maples: Metall. Trans., 1987, vol. 18A, pp. 1979–87.10.1007/BF02647028 ↗
3. S. Viswanathan, V.K. Sikka, and H.D. Brody: J. Met., 1992, pp. 37–40.10.1007/BF03222324 ↗
4. S.-T. Kao, E. Chang, and Y.-W. Lee: Mater. Trans., JIM, 1994, vol. 33, pp. 632–35.10.2320/matertrans1989.35.632 ↗
5. A.V. Kuznetsov and K. Vafai: Int. J. Heat Mass Transfer, 1995, vol. 38, pp. 2557–67.10.1016/0017-9310(95)00012-X ↗
6. T.K. Lee, J.H. Kim, and S.K. Hwang: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2723–29.10.1007/s11661-997-0029-2 ↗
7. P. Kelley, C.R. Wong, and A.L. Moran: Int. J. Powder Metall., 1993, vol. 29, p. 161.
8. A.M. Samuel, A. Gotmare, and F.H. Samuel: Comp. Sci. Technol., 1995, vol. 53, pp. 301–15.10.1016/0266-3538(95)00001-1 ↗
9. A. Mortensen and J.A. Cornie: Metall. Trans. A, 1987, vol. 18A, pp. 1160–63.10.1007/BF02668570 ↗
10. R. Asthana: Solidification Processing of Reinforced Metals, Trans Tech Publications Ltd., Aedermannsdorf, Switzerland, 1998, p. 12.10.4028/b-Ae8iDN ↗
11. M.E. Ghomy and J. Campbell: Cast Met., 1995, vol. 8, pp. 115–22.10.1080/09534962.1995.11819199 ↗
12. J. Campbell: Castings, Butterworth-Heinemann Ltd., Oxford, United Kingdom, 1991, p. 164.
13. O.J. Ilegbusi and J. Yang: J. Composite Mater., 1999, submitted for publication.
14. J.C. Fisher: J. Appl. Phys., 1948, vol. 19, pp. 1062–67.10.1063/1.1698012 ↗
15. J. Campbell: The Solidification of Metals, The Iron and Steel Institute, London, 1967, pp. 18–26.
16. P.M. Wilt: J. Coll. Interface Sci., 1986, vol. 112, pp. 530–38.10.1016/0021-9797(86)90122-0 ↗
17. S.G. Bankoff and T. Haute: Trans. Am. Soc. Mech. Eng., 1957, vol. 79, pp. 735–40.10.1115/1.4013142 ↗
18. J. Campbell: AFS Cast Met. Res. J., 1969, vol. 5, pp. 1–8.
19. Liu Yaohui, He Zhenming, Yu Sirong, and Dong Guitian: J. Mater. Sci. Lett., 1992, vol. 11, pp. 896–98.10.1007/BF00730500 ↗
20. D.-S. Han, and J.-K. Yoon: Metal Matrix Composites, Society of Automotive Engineers, Inc., Warrendale, PA, 1994, pp. 1–8.
21. J.V. Naidich: Progr. Surface Membrane Sci., 1981, vol. 14, pp. 353–484.10.1016/B978-0-12-571814-1.50011-7 ↗
22. R. Asthana: Solidification Processing of Reinforced Metals, Trans Tech Publications Ltd., Aedermannsdorf, Switzerland, 1998, p. 108.10.4028/b-Ae8iDN ↗
23. J.E. Schoutens: J. Mater. Sci., 1989, vol. 24, pp. 2681–86.10.1007/BF02385611 ↗
24. T.M. Liu and C.G. Chao: Mater. Sci. Eng., 1993 vol. 169A, pp. 79–84.10.1016/0921-5093(93)90600-J ↗