Measurement and Discussion of Low-Temperature Hot Corrosion Damage Accumulation upon Nickel-Based Superalloy Rene 104
Source abstract
Abstract
This study presents quantitative information regarding the extent and morphology of hot corrosion damage evolved upon the surface of nickel-based superalloy Rene 104. Exposure times under an accelerated corrosion regime at 704 °C range from 0.5 to 100 hours. Unlike oxidation, hot corrosion is observed to proceed at an alarmingly rapid rate. The evolution of high-temperature damage can be distinguished into two regimes. The first describes damage occurring at low exposure times, corresponding to what is ascribed as a phenomenon of transient oxidation, leading to a pitted surface. Following a distinguishable incubation period, hot corrosion damage proceeds such that damage depths are typically several hundreds of microns, with a generalized attack mode dominating the corrosion observed. Characteristics of the damage evolution are quantified via optical profilometry, while microscopy and XPS are used to support mechanistic interpretations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. J. Stringer: Mater. Sci. Technol., 1987, vol. 3, pp. 482–9310.1080/02670836.1987.11782259 ↗
2. D. Deb, S. Ramakrishna Iyer, V.M. Radhakrishnan: Mater. Lett., 1996, vol. 29, pp. 19–2310.1016/S0167-577X(96)00109-7 ↗
3. N. Eliaz, G. Shemesh, R.M. Latanision: Eng. Failure Analysis, 2002, vol. 9, pp. 31–4310.1016/S1350-6307(00)00035-2 ↗
4. A.J.B. Cutler: Mater. Sci. Technol., 1987, vol. 3, pp. 512–1810.1080/02670836.1987.11782262 ↗
5. X. Ren, F. Wang, X. Wang: Surf. Coat. Technol., 2005, vol. 198, pp. 425–3110.1016/j.surfcoat.2004.10.108 ↗
6. M. Durand-Charre: The Microstructure of Superalloys, CRC Press, Boca Raton, FL, 1998
7. T.P. Gabb, A. Garg, D. Ellis, and K.M. O’Connor: Detailed Microstructural Characterization of Disk Alloy Me3, NASA Technical Memorandum 2004–213066, National Aeronautics and Space Administration, Cleveland, OH, 2004
8. S.T. Wlodek, M. Kelly, D.A. Alden: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 129–36
9. A.J.B. Cutler: Mater. Sci. Technol., 1987, vol. 3, pp. 512–1810.1080/02670836.1987.11782262 ↗
10. R.A. Rapp: Corrosion, 1986, vol. 42, pp. 568–7710.5006/1.3583026 ↗
11. Y.L. Lu, L.J. Chen, P.K. Liaw, G.Y. Wang, C.R. Brooks, S.A. Thompson, J.W. Blust, P.F. Browning, A.K. Bhattacharya, J.M. Aurrecoechea, D.L. Klarstrom: Mater. Sci. Eng. A, 2006, vol. 429, pp. 1–1010.1016/j.msea.2005.07.039 ↗
12. M.G. Koul: Corrosion, 2003, vol. 59, pp. 563–7410.5006/1.3277587 ↗
13. N. Birbilis: unpublished research, The Ohio State University, OH, 2006
14. D.A. Woodford: Metall. Trans. A, 1981, vol. 12A, pp. 299–30810.1007/BF02655203 ↗
15. R.H. Bricknell, D.A. Woodford: Acta Metall., 1982, vol. 30, pp. 257–6410.1016/0001-6160(82)90064-5 ↗
16. G.C. Wood, F.H. Stott: Mater. Sci. Technol., 1987, vol. 3, pp. 519–3010.1080/02670836.1987.11782263 ↗
17. P. Berthod, C. Vebert, L. Aranda, R. Podor, C. Rapin: Oxid. Met., 2005, vol. 63, pp. 57–7210.1007/s11085-005-1951-6 ↗
18. P. Berthod, S. Michon, S. Mathieu, R. Podor, C. Rapin, P. Steinmetz: Mater. Sci. Forum, 2004, vols. 461–464, pp. 1117–2410.4028/www.scientific.net/MSF.461-464.1117 ↗
19. C. Cabet, A. Monnier, A. Terlain: Mater. Sci. Forum, 2004, vols. 461–464, pp. 1165–7210.4028/www.scientific.net/MSF.461-464.1165 ↗
20. S.S. Kin, S.J. Choe, K.S. Shin: Mater. Mater., 1998, vol. 4, pp. 15–2310.1007/BF03026060 ↗
21. T.P. Gabb: unpublished research, NASA Glenn Research Center, 2006