journal article·2015-09

A Laser Deposition Strategy for the Efficient Identification of Glass-Forming Alloys

Peter Tsai, Katharine M. Flores

Publisher page

Abstract

Compositionally graded Cu-Zr specimens covering a wide composition range (30 to 60 at. pct Zr) were fabricated by direct laser deposition. By observing the surface topography of the as-fabricated specimens with differential interference contrast microscopy, primarily amorphous regions corresponding to compositions of high glass-forming ability were rapidly identified. Electron diffraction results confirmed the relationship between surface topography and atomic structure. The compositional widths of the amorphous regions were observed to narrow with increasing heat input from the laser, enabling further identification of local maxima in the glass-forming landscape of Cu-Zr alloys. In this work, we report two peaks in the glass-forming ability, located at Cu64.7Zr35.3 and Cu50.2Zr49.8. These two compositions find excellent agreement with previously reported results based on casting of discrete compositions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Phase-change materials and chalcogenides · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. W. Klement, R. Willens, and P. Duwez, Nature 187, 869–70 (1960).10.1038/187869b0 ↗
2. J. F. Löffler, Intermetallics 11, 529–40 (2003).10.1016/S0966-9795(03)00046-3 ↗
3. A. Inoue, N. Nishiyama, and H. Kimura, Mater. Trans. JIM 38, 179–83 (1997).10.2320/matertrans1989.38.179 ↗
4. D. Turnbull, Contemp. Phys. 10, 473–88 (1969).10.1080/00107516908204405 ↗
5. A. Inoue, T. Zhang, and T. Masumoto, J. Non. Cryst. Solids 156, 473–80 (1993).10.1016/0022-3093(93)90003-G ↗
6. Z. Lu and C. Liu, Phys. Rev. Lett. 91, 1155051-54 (2003).
7. Z. L. Long, G. Q. Xie, H. Q. Wei, X. P. Su, J. Peng, P. Zhang, and A. Inoue, Mater. Sci. Eng. A 509, 23–30 (2009).10.1016/j.msea.2009.01.063 ↗
8. T. A. Waniuk, J. Schroers, and W. L. Johnson, Appl. Phys. Lett. 78, 1213–15 (2001).10.1063/1.1350624 ↗
9. Y. Li, J. Mater. Sci. Technol. 15, 97–110 (1999).
10. D. B. Miracle, Acta Mater. 54, 4317–36 (2006).10.1016/j.actamat.2006.06.002 ↗
11. D. B. Miracle, Nat. Mater. 3, 697–702 (2004).10.1038/nmat1219 ↗
12. D.B. Miracle, A.L. Greer, and K.F. Kelton: J. Non-Cryst. Solids 354, 4049–55, 2008.10.1016/j.jnoncrysol.2008.05.006 ↗
13. A. P. Wang, J. Q. Wang, and E. Ma, Appl. Phys. Lett. 90, 1219121–23 (2007).
14. J. H. Na, M. D. Demetriou, M. Floyd, A. Hoff, G. R. Garrett, and W. L. Johnson, Proc. Natl. Acad. Sci. U. S. A. 111, 9031–36 (2014).10.1073/pnas.1407780111 ↗
15. Y. P. Deng, Y. F. Guan, J. D. Fowkes, S. Q. Wen, F. X. Liu, G. M. Pharr, P. K. Liaw, C. T. Liu, and P. D. Rack, Intermetallics 15, 1208–16 (2007).10.1016/j.intermet.2007.02.011 ↗
16. A. Y. Li, Q. Guo, J. A. Kalb, C. V Thompson, and Y. Li, Science 322, 1816–19 (2008).10.1126/science.1163062 ↗
17. S. Y. Ding, J. Gregoire, J. J. Vlassak, and J. Schroers, J. Appl. Phys. 111, 1149011–16 (2012).10.1063/1.4722996 ↗
18. S. Y. Ding, Y. H. Liu, Y. L. Li, Z. Liu, S. Sohn, F. J. Walker, and J. Schroers, Nat. Mater. 13, 494–500 (2014).10.1038/nmat3939 ↗
19. P. Tsai and K. M. Flores, Intermetallics 55, 162–66 (2014).10.1016/j.intermet.2014.07.017 ↗
20. J. Kim, D. Lee, S. Shin, and C. Lee, Mater. Sci. Eng. A 434, 194–201 (2006).10.1016/j.msea.2006.06.118 ↗
21. B. Li, Z. Y. Li, J. G. Xiong, L. Xing, D. Wang, and Y. Li, J. Alloys Compd. 413, 118–21 (2006).10.1016/j.jallcom.2005.07.005 ↗
22. D. Carvalho, S. Cardoso, and R. Vilar, Scripta Mater. 37, 523–27 (2003).10.1016/S1359-6462(97)00127-9 ↗
23. F. Audebert, R. Colaco, R. Vilar, and H. Sirkin, Scripta Mater. 48, 281–86 (2003).10.1016/S1359-6462(02)00382-2 ↗
24. X. L. Wu and Y. S. Hong, Surf. Coatings Technol. 132, 194–97 (2000).10.1016/S0257-8972(00)00866-5 ↗
25. X. Wu, B. Xu, and Y. Hong, Mater. Lett. 56, 838–41 (2002).10.1016/S0167-577X(02)00624-9 ↗
26. B. Q. Chen, Y. Li, Y. Cai, R. Li, S. J. Pang, and T. Zhang, J. Alloys Compd. 511, 215–20 (2012).10.1016/j.jallcom.2011.09.039 ↗
27. B. Zheng, Y. Zhou, J. E. Smugeresky, and E. J. Lavernia, Metall. Mater. Trans. A 40, 1235–45 (2009).10.1007/s11661-009-9828-y ↗
28. G. L. Yang, X. Lin, F. C. Liu, Q. Hu, L. Ma, J. F. Li, and W. D. Huang, Intermetallics 22, 110–15 (2012).10.1016/j.intermet.2011.10.008 ↗
29. R. Petters, M. Stoica, S. Scudino, S. Pauly, and L. Lo, Mater. Today 16, 37–41 (2013).10.1016/j.mattod.2013.01.018 ↗
30. D. Ausserré and M. P. Valignat, Nano Lett. 6, 1384–88 (2006).10.1021/nl060353h ↗
31. H. Sun and K. M. Flores, J. Mater. Res. 23, 2692–703 (2011).10.1557/JMR.2008.0329 ↗
32. H. Sun and K. M. Flores, Metall. Mater. Trans. A 41, 1752–57 (2010).10.1007/s11661-009-0151-4 ↗
33. D. Wang, Y. Li, B. B. Sun, M. L. Sui, K. Lu, and E. Ma, Appl. Phys. Lett. 84, 4029–31 (2004).10.1063/1.1751219 ↗
34. D. Xu, B. Lohwongwatana, G. Duan, W. L. Johnson, and C. Garland, Acta Mater. 52, 2621–24 (2004).10.1016/j.actamat.2004.02.009 ↗
35. D. C. Hofmann, G. Duan, and W. L. Johnson, Scripta Mater. 54, 1117–22 (2005).10.1016/j.scriptamat.2005.11.065 ↗
36. G. Duan, D. H. Xu, Q. Zhang, G. Y. Zhang, T. Cagin, W. L. Johnson, and W. A. Goddard, Phys. Rev. B 71, 2242081–89 (2005).10.1103/PhysRevB.71.224208 ↗
37. O. J. Kwon, Y. C. Kim, K. B. Kim, Y. K. Lee, and E. Fleury, Met. Mater. Int. 12, 207–12 (2006).10.1007/BF03027532 ↗
38. X. H. Lin, W. L. Johnson, and W. K. Rhim, Mater. Trans. JIM 38, 473–77 (1997).10.2320/matertrans1989.38.473 ↗