journal article·2010-06

Multimodal Precipitation in the Superalloy IN738LC

Ercan Balikci, Dinc Erdeniz

Publisher page

Abstract

IN738LC is a polycrystalline, nickel-base superalloy, which is used in aggressive environments at high temperatures. The required strength is provided by precipitate strengthening. Both unimodal and multimodal precipitate distributions are observed in IN738LC. After reaching a critical size, a unimodal precipitate microstructure transforms to a bimodal one. This transformation is controlled by the precipitate-matrix interface, which is under compression in IN738LC. As the unimodal precipitates grow, the strained interface, due to differential lattice parameter of the matrix and the precipitate phase, stops solute diffusion into the growing precipitates. Hence, the solute atoms, entrapped in the matrix, saturate the matrix and form new, fine precipitates. Dissolution of some large precipitates also supplies solute to supersaturate the matrix. On the other hand, a multimodal precipitate distribution tends to become unimodal at low aging temperatures and bimodal at high aging temperatures. Interestingly, the activation energy is calculated for the coarsening of large precipitates in multimodal distribution and is found to vary with aging time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. P.W. Schilke: GER 3569G, GE Energy Report, “Advanced Gas Turbine Materials and Coatings”, New York, NY, 2004.
2. C.G. Bieber and J.J. Galka: U.S. Patent No. 3,459,545, Aug. 5, 1969.
3. R.K. Sidhu, O.A. Ojo, and C.M. Chaturvedi: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 858–70.10.1007/s11661-006-9063-8 ↗
4. O.A. Ojo, N.L. Richards, and M.C. Chaturvedi: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 421–33.10.1007/s11661-006-0013-2 ↗
5. O.A. Ojo, N.L. Richards, and M.C. Chaturvedi: Mater. Sci. Technol., 2004, vol. 20, pp. 1027–34.10.1179/026708304225019948 ↗
6. R. Roshental and D.R.F. West: Mater. Sci. Technol., 1994, vol. 15, pp. 1387–94.10.1179/026708399101505518 ↗
7. S. Behrouzghaemi and R.J. Mitchell: Mater. Sci. Eng. A, 2008, vol. 498, pp. 266–71.10.1016/j.msea.2008.07.069 ↗
8. C.G. Bieber and J.R. Mihalisin: 2nd Int. Conf. on the Strength of Metals and Alloys, Pacific Grove, CA, 30 Aug–4 Sept 1970, The American Society for Metals, Metals Park, Ohio, 1970.
9. I.M. Lifshitz and V.V. Sloyozov: J. Phys. Chem. Solids, 1961, vol. 19 (1–2), pp. 35–50.10.1016/0022-3697(61)90054-3 ↗
10. C. Wagner: Z. Elektrochemie, 1961, vol. 65 (7–8), pp. 581–91.
11. A.J. Ardell: Acta Metall., 1972, vol. 20 (1), pp. 61–71.10.1016/0001-6160(72)90114-9 ↗
12. A.D. Brailsford and P. Wynblatt: Acta Metall., 1979, vol. 27 (3), pp. 489–97.10.1016/0001-6160(79)90041-5 ↗
13. C.K.L. Davies, P. Nash, and R.N. Stevens: Acta Metall., 1980, vol. 28 (2), pp. 179–89.10.1016/0001-6160(80)90067-X ↗
14. K. Tsumuraya and Y. Miyata: Acta Metall., 1983, vol. 31 (3), pp. 437–52.10.1016/0001-6160(83)90221-3 ↗
15. J.A. Marqusee and J. Rose: J. Chem. Phys., 1984, vol. 80 (1), pp. 536–43.10.1063/1.446427 ↗
16. P.W. Voorhees and M.E. Glicksman: Acta Metall., 1984, vol. 32 (11), pp. 2001–11.10.1016/0001-6160(84)90180-9 ↗
17. E. Balikci, A. Raman, and R.A. Mirshams: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1993–2003.10.1007/s11661-997-0156-9 ↗
18. E. Balikci, R.A. Mirshams, and A. Raman: Z. Metallkd., 1999, vol. 90 (2), pp. 132–40.
19. R.J. Mitchell, M. Preuss, M.C. Hardy, and S. Tin: Mater. Sci. Eng. A, 2006, vol. 423, pp. 282–91.10.1016/j.msea.2006.02.039 ↗
20. R.J. Mitchell and M. Preuss: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 615–27.10.1007/s11661-007-9089-6 ↗
21. J. Mao, K. Chang, W. Yang, K. Ray, S.P. Vaze, and D.U. Furrer: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2441–49.10.1007/s11661-001-0034-9 ↗
22. P.M. Sarosi, B. Wang, J.P. Simmons, Y. Wang, and M.J. Mills: Scripta Mater., 2007, vol. 57, pp. 767–70.10.1016/j.scriptamat.2007.06.014 ↗
23. Y.H. Wen, J.P. Simmons, C. Shen, C. Woodward, and Y. Wang: Acta Mater., 2003, vol. 51, pp. 1123–32.10.1016/S1359-6454(02)00516-5 ↗
24. W.S. Rasband: Image J, U.S. National Institutes of Health, Bethesda, MD, http://rsb.info.nih.gov/ij/, 1997–2007.
25. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, 2nd ed., Chapman and Hall, New York, NY, 1992, pp. 112, 265, 315, and 316.
26. M. Durand-Charre: The Microstructure of Superalloys, Gordon and Breach Science Publishers, Amsterdam, 1997, pp. 68–69.
27. P.J. Henderson and M. McLean: Acta Metall., 1983, vol. 31 (8), pp. 1203–19.10.1016/0001-6160(83)90182-7 ↗
28. G.I. Rosen, S.F. Dirnfeld, M. Bamberg, and B. Prinz: Z. Metallkd., 1994, vol. 85, pp. 127–30.
29. P.K. Footner and B.P. Richards: J. Mater. Sci., 1982, vol. 17, pp. 2141–53.10.1007/BF00540433 ↗
30. E. Balikci, R.E. Ferrell, Jr., and A. Raman: Z. Metallkd., 1999, vol. 90, pp. 141–46.
31. R.S. Moshtaghin and S. Asgari: Mater. Des., 2003, vol. 24, pp. 325–30.10.1016/S0261-3069(03)00061-X ↗
32. A.J. Ardell and V. Ozolins: Nat. Mater., 2004, vol. 4, pp. 309–16.10.1038/nmat1340 ↗
33. E. Balikci, A. Raman, and R.A. Mirshams: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2803–08.10.1007/s11661-999-0117-6 ↗
34. K. Dwarapureddy, E. Balikci, S. Ibekwe, and A. Raman: J. Mater. Sci., 2008, vol. 43 (6), pp. 1802–10.10.1007/s10853-007-2342-y ↗
35. E. Balikci and A. Raman: J. Mater. Sci., 2000, vol. 35 (14), pp. 3593–97.10.1023/A:1004869714854 ↗
36. E. Balikci and A. Raman: J. Mater. Sci., 2008, vol. 43, pp. 927–32.10.1007/s10853-007-2206-5 ↗
37. I. Roy, E. Balikci, S. Ibekwe and A. Raman: J. Mater. Sci., 2005, vol. 40, pp. 6207–15.10.1007/s10853-005-3154-6 ↗