Biaxial Deformation Behavior and Enhanced Formability of Ultrafine-Grained Pure Copper
Source abstract
Abstract
Coarse-grained commercially pure Cu was subjected to equal channel angular pressing at room temperature for 2 passes and 12 passes resulting in grain refinement down to the ultrafine scale. Uniaxial tensile testing revealed that as-ECAP Cu samples have very high strength, but low uniform elongation and elongation to failure, whereas small punch testing showed that strain in biaxial stretching of the as-ECAP Cu specimens was comparable to that in the coarse-grained Cu. Analysis of surface relief demonstrated extensive microlocalization of plastic flow into microshear bands during biaxial stretching of the as-ECAP Cu specimens. The effect of microstructure and stress state on formability of the material and the mechanisms governing its plastic deformation are discussed. It is suggested that although the high strength as-ECAP Cu exhibits poor ductility in uniaxial tension, in other strain paths such as biaxial stretching, it can show high formability which is sufficient for metal-forming processes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. ASM Handbook: Volume 2. Properties and Selection: Nonferrous Alloys and Special Purpose Materials, ASM, 1990.
2. X.H. Chen, L. Lu and K. Lu: J. Appl. Phys., 2007, vol.102, pp. 0837081-0837088.
3. N. Takata, S.H. Lee and N. Tsuji: Mater. Lett., 2009, vol. 63, pp.1757-1760.10.1016/j.matlet.2009.05.021 ↗
4. Y. Zhang, Y.S. Li, N.R. Tao and K. Lu: Appl. Phys. Lett., 2007, vol. 91, pp. 2119011-2119013.
5. D.V. Shangina, N.R. Bochvar and S.V. Dobatkin: J. Mater. Sci. 2012, vol. 47, pp. 7764-7769.10.1007/s10853-012-6525-9 ↗
6. Y. Champion and Y. Brechet: Adv. Eng. Mater., 2010, vol. 12, pp. 798-802.10.1002/adem.200900346 ↗
7. R. Z. Valiev, M. J. Zehetbauer, Y. Estrin, H.W. Hoppel, Y. Ivanisenko, H. Hahn, G. Wilde, H.J. Roven, X. Sauvage and T.G. Langdon: Adv. Eng. Mater., 2007, vol. 9, pp. 527-533.10.1002/adem.200700078 ↗
8. R.Z. Valiev, I.V. Alexandrov, T.C. Lowe and Y.T. Zhu: J. Mater. Res., 2002, vol. 17, pp. 5-8.10.1557/JMR.2002.0002 ↗
9. F.H. Dalla Torre, E.V. Pereloma and C.H.J. Davies (2006) Acta Mater. 54:1135-1146.10.1016/j.actamat.2005.10.041 ↗
10. C. Huang, S. Wu, S. Li and Z. Zhang: Adv. Eng. Mater., 2008, vol. 10, pp. 434-438.10.1002/adem.200700324 ↗
11. N. Lugo, N. LLorca, J.J. Sunol and J.M. Cabrera: J. Mater. Sci., 2010, vol. 45, pp. 2264-2273.10.1007/s10853-009-4139-7 ↗
12. J. Gubicza, N.Q. Chinh, J.L. Lábár, S. Dobatkin, Z. Hegedus and T.G. Langdon: J. Alloy. Compd., 2009, vol. 483, pp. 271–274.10.1016/j.jallcom.2008.07.200 ↗
13. H. Conrad: Mater. Sci. Eng. A, 2003, vol. 341, pp. 216-228.10.1016/S0921-5093(02)00238-1 ↗
14. Y.M. Wang and E. Ma: Acta Mater., 2004, vol. 52, pp. 1699-1709.10.1016/j.actamat.2003.12.022 ↗
15. Y.M. Wang, M. Chen, F. Zhou and E. Ma: Nature, 2002, vol. 419, p. 912-915.10.1038/nature01133 ↗
16. F. Dalla Torre, R. Lapovok, J. Sandlin, P.F. Thomson, C.H.J. Davies and E.V Pereloma (2004) Acta Mater. 52, pp. 4819–4832.10.1016/j.actamat.2004.06.040 ↗
17. S. Cheng, E. Ma, Y.M. Wang, L.J. Kecskes, K.M. Youssef, C.C. Koch, U.P. Trociewitz and K. Han: Acta Mater., 2005, vol. 53, pp. 1521–1533.10.1016/j.actamat.2004.12.005 ↗
18. Y.M. Wang, K. Wang, D. Pan, K. Lu, K.J. Hemker and E. Ma: Scripta Mater., 2003, vol. 48, pp. 1581-1586.10.1016/S1359-6462(03)00159-3 ↗
19. Y. Champion, C. Langlois, S. Guerin-Mailly, P. Langlois, J.L. Bonnentien and M.J. Hytch: Science, 2003, vol. 300, pp. 310-311.10.1126/science.1081042 ↗
20. E. Ma (2006) JOM 58(4):49-56.10.1007/s11837-006-0215-5 ↗
21. Y. Zhao, Y.T. Zhu and E.J. Lavernia: Adv. Eng. Mater., 2010, vol. 12, pp. 769-778.10.1002/adem.200900335 ↗
22. I.A. Ovidko and T.G. Langdon: Rev. Adv. Mater. Sci., 2012, vol. 30, pp. 103-111.
23. Y.H. Zhao, X.Z. Liao, S. Cheng, E. Ma and Y.T. Zhu: Adv. Mater., 2006, vol. 18, p. 2280-2283.10.1002/adma.200600310 ↗
24. R. Lapovok and P.D. Hodgson: J. Mech. Phys. Solids, 2009, vol. 57, pp. 1851-1864.10.1016/j.jmps.2009.07.008 ↗
25. K. Yang, Y. Ivanisenko, A. Caron, A. Chuvilin, L. Kurmanaeva, T. Scherer, R.Z. Valiev and H.J. Fecht (2010) Acta Mater 58:967-978.10.1016/j.actamat.2009.10.013 ↗
26. R.Z. Valiev and T.G. Langdon: Prog. Mater Sci., 2006, vol. 51, pp. 881-981.10.1016/j.pmatsci.2006.02.003 ↗
27. J.M. Garcia-Infanta, A.P. Zhilyaev, A. Sharafutdinov, O.A. Ruano and F. Carreno: J. Alloy. Compd., 2009, vol. 473, pp. 163-166.10.1016/j.jallcom.2008.06.006 ↗
28. Z.X. Wang, H.J. Shi, J. Lu, P. Shi and X.F. Ma: Nucl. Eng. Des., 2008, vol. 238, pp. 3186-3193.10.1016/j.nucengdes.2008.07.013 ↗
29. Y.W. Ma and K.B. Yoon: Mater. Sci. Eng. A., 2010, vol. 527, pp. 3630-3638.10.1016/j.msea.2010.02.057 ↗
30. J.S. Ha and E. Fleury: Int. J. Press. Vessel. Pip., 1998, vol. 75, pp. 707-713.10.1016/S0308-0161(98)00075-1 ↗
31. E. Fleury and J.S. Ha: Int. J. Press. Vessel. Pip., 1998, vol. 75, pp. 699-706.10.1016/S0308-0161(98)00074-X ↗
32. M.B. Toloczko, M.L. Hamilton and G.E. Lucas: J. Nucl. Mater., 2000, vol. 283-287, pp. 987-991.10.1016/S0022-3115(00)00198-7 ↗
33. R. Yoda, K. Shibata, T. Morimitsu, D. Terada and N. Tsuji: Scripta Mater., 2011, vol. 65, pp. 175-178.10.1016/j.scriptamat.2011.02.002 ↗
34. I. Horcas, R. Fernandez, J.M Gomez-Rodriguez, J. Colchero, J. Gomez-Herrero and A.M. Baro: Rev. Sci. Instrum., 2007, vol. 78, pp. 0137051-0137058.10.1063/1.2432410 ↗
35. E.O. Hall (1951) Proc. Phys. Soc. B 64:747-753.10.1088/0370-1301/64/9/303 ↗
36. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25-28.
37. S.D. Norris and J.D. Parker: Mater. Sci. Technol., 1996, vol. 12, pp. 163-170.10.1179/026708396790165641 ↗
38. D. Jia, K.T. Ramesh and E. Ma: Acta Mater., 2003, vol. 51, pp. 3495-3509.10.1016/S1359-6454(03)00169-1 ↗
39. S. Malekjani, P.D. Hodgson, P. Cizek, I. Sabirov and T.B. Hilditch: Int. J. Fatigue, 2011, vol. 33, pp. 700-709.10.1016/j.ijfatigue.2010.11.025 ↗
40. A. Vinogradov, S. Hashimoto, V. Patlan and K. Kitagawa: Mater. Sci. Eng. A, 2001, vol. 319–321, pp. 862–866.10.1016/S0921-5093(01)01057-7 ↗
41. B.P. Kashyap, P.D. Hodgson, Y. Estrin, I. Timokhina, M.R. Barnett and I. Sabirov: Metall. Mater. Trans. A., 2009, vol. 40A, pp. 3294-3303.10.1007/s11661-009-0036-6 ↗
42. I. Sabirov, M.R. Barnett, Y. Estrin and P.D. Hodgson: Scripta Mater., 2009, vol. 61, pp. 181-184.10.1016/j.scriptamat.2009.03.032 ↗
43. R.W. Hayes, D. Witkin, F. Zhou and E.J. Lavernia: Acta Mater., 2004, vol. 52, pp. 4259-4271.10.1016/j.actamat.2004.05.042 ↗
44. I. Sabirov, Y. Estrin, M.R. Barnett, I. Timokhina and P.D. Hodgson: Acta Mater., 2008, vol. 56, pp. 2223–2230.10.1016/j.actamat.2008.01.020 ↗
45. A. Taylor, M. Weiss, T. Hilditch, N. Stanford and P.D. Hodgson: Mater. Sci. Eng. A., 2012, vol. 555, pp. 148-153.10.1016/j.msea.2012.06.044 ↗