Fabrication of Porous Aluminum Using Gases Intrinsically Contained in Aluminum Alloy Die Castings
Source abstract
Abstract
Closed-cell porous aluminum was fabricated using gases intrinsically contained in aluminum alloy die castings without using a blowing agent. By incorporating the friction stir processing technique, porous aluminum with a porosity of more than 50 pct was successfully obtained at a holding temperature of 923 to 948 K and a holding time of 10 minutes. This proposed die-casting route has high potential for fabricating porous aluminum at a low cost by a higher productivity process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Nanoporous metals and alloys · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. J. Baumeister, J. Banhart, and M. Weber: Mater. Des., 1997, vol. 18, pp. 217–20.10.1016/S0261-3069(97)00050-2 ↗
2. A. Fuganti, L. Lorenzi, A.G. Hanssen, and M. Langseth: Adv. Eng. Mater., 2000, vol. 2, pp. 200–04.10.1002/(SICI)1527-2648(200004)2:4<200::AID-ADEM200>3.0.CO;2-2 ↗
3. J. Banhart: Prog. Mater. Sci., 2001, vol. 46, pp. 559–632.10.1016/S0079-6425(00)00002-5 ↗
4. H.N.G. Wadley: Adv. Eng. Mater., 2002, vol. 4, pp. 726–33.10.1002/1527-2648(20021014)4:10<726::AID-ADEM726>3.0.CO;2-Y ↗
5. J. Banhart: Adv. Eng. Mater., 2006, vol. 8, pp. 781–94.10.1002/adem.200600071 ↗
6. H. Nakajima: Prog. Mater. Sci, 2007, vol. 52, pp. 1091–1173.10.1016/j.pmatsci.2006.09.001 ↗
7. H.D. Kunze, J. Baumeister, J. Banhart, and M. Weber: Powder Metall. Int., 1993, vol. 25, pp. 182–85.
8. F. Baumgartner, I. Duarte, and J. Banhart: Adv. Eng. Mater., 2000, vol. 2, pp. 168–74.10.1002/(SICI)1527-2648(200004)2:4<168::AID-ADEM168>3.0.CO;2-O ↗
9. I. Duarte and J. Banhart: Acta Mater., 2000, vol. 48, pp. 2349–62.10.1016/S1359-6454(00)00020-3 ↗
10. K. Kitazono, E. Sato, and K. Kuribayashi: Scripta Mater., 2004, vol. 50, pp. 495–98.10.1016/j.scriptamat.2003.10.035 ↗
11. K. Kitazono, S. Nishizawa, E. Sato, and T. Motegi: Mater. Trans., 2004, vol. 45, pp. 2389–94.10.2320/matertrans.45.2389 ↗
12. S. Tsuda, M. Kobashi, and N. Kanetake: Mater. Trans., 2006, vol. 47, pp. 2125–30.10.2320/matertrans.47.2125 ↗
13. Y. Hangai and T. Utsunomiya: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 275–77.10.1007/s11661-008-9733-9 ↗
14. R.S. Mishra, Z.Y. Ma, and I. Charit: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2003, vol. 341, pp. 307–10.10.1016/S0921-5093(02)00199-5 ↗
15. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R-Rep., 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
16. Z.Y. Ma: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 642–58.10.1007/s11661-007-9459-0 ↗
17. D.F. Allsop and D. Kennedy: Pressure Diecasting, Part 2, The Technology of the Casting and the Die, Pergamon Press, Ltd., Elmsford, NY, 1983, pp. 6–7.
18. W. Walkington: Gas Porosity: A Guide to Correcting the Problems, North American Die Casting Association, Wheeling, IL, 2006.
19. M.L. Santella, T. Engstrom, D. Storjohann, and T.Y. Pan: Scripta Mater., 2005, vol. 53, pp. 201–06.10.1016/j.scriptamat.2005.03.040 ↗
20. Y.G. Kim, H. Fujii, T. Tsumura, T. Komazaki, and K. Nakata: Mater. Lett., 2006, vol. 60, pp. 3830–37.10.1016/j.matlet.2006.03.123 ↗
21. K. Nakata, Y.G. Kim, H. Fujii, T. Tsumura, and T. Komazaki: Mater. Sci. Eng. A–Struct. Mater. Prop. Microstruct. Process., 2006, vol. 437, pp. 274–80.10.1016/j.msea.2006.07.150 ↗
22. Y.S. Sato, S.H.C. Park, A. Matsunaga, A. Honda, and H. Kokawa: J. Mater. Sci., 2005, vol. 40, pp. 637–42.10.1007/s10853-005-6301-1 ↗
23. J.Q. Su, T.W. Nelson, and C.J. Sterling: Scripta Mater., 2005, vol. 52, pp. 135–40.10.1016/j.scriptamat.2004.09.014 ↗