Mechanical and Microstructural Characterization of Porous NiTi Shape Memory Alloys
Source abstract
Abstract
This article presents the mechanical behavior of porous NiTi in the context of biomedical applications related to bone prostheses. To produce the porous metallic material, a novel technique consisting of mixing prealloyed NiTi powder with a polymer powder and a foaming agent has been used. This method permits control of the size of pores and the porosity level. For the present study, pores similar to those found in bones (400 to 500 μm) were obtained with a total porosity of the specimens varying from 50 to 70 pct. The compression mechanical testing carried out on small cylindrical specimens revealed shape memory deformation recovery up to 6.4 pct, while the superelastic behavior resulted in a reversible deformation up to 7.7 pct. By varying the amount of porosity, it was possible to obtain Young’s moduli in the range of 2.6 to 4.6 GPa, which is similar to the modulus of cancellous (spongy) human bone.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. S. Rhalmi, M. Odin, M. Assad, M. Tabrizian, C.H. Rivard, and L.H. Yahia: Bio-Med. Mater. Eng., 1999, vol. 9, pp. 151–62.
2. H. Yahia: Shape Memory Implants, Springer, Berlin, 2000, p. xxiii.10.1007/978-3-642-59768-8 ↗
3. R. Branemark, B. Rydevik, R.R. Myers, and P.I. Branemark: J. Rehab. Res. Development, 2001, vol. 38, pp. 175–81.
4. Shape Memory Alloys: Fundamentals, Modeling and Applications, V. Brailovski, S. Prokoshkin, P. Terriault, and F. Trochu, eds., École de Technologie Supérieure, Montréal, 2003, p. 844.
5. A. Chernyshov, M. Leroux, M. Assad, S. Allard, and B. Sicotte: Medical Device Materials, Proc. Materials and Processes for Medical Devices Conf. 2003, Anaheim, CA, 2003, ASM INTERNATIONAL, Materials Park, OH, 2003, pp. 388–93.
6. J.S. Kim, S.H. Lee, and J.H. Kang: Proc. Int. Conf. on Shape Memory and Superelastic Technologies (SMST-2000), Asilomar, CA, 2000, A.R. Pelton and S.M. Russell, eds., SMST, Fremont, CA, 2000, pp. 77–85.
7. O. Prymak, D. Bogdanski, M. Koller, S.A. Esenwein, G. Muhr, F. Beckmann, T. Donath, M. Assad, and M. Epple: Biomaterials, 2005, vol. 26, pp. 5801–07.10.1016/j.biomaterials.2005.02.029 ↗
8. J. Ryhänen: Academic Dissertation, Oulu University Press, Finland, 1999.
9. C. Chu, B. Li, S. Wang, S. Zhang, X. Yang, and Z. Yin: Trans. Nonferrous Met. Soc. China, 1997, vol. 7, pp. 84–87 (English edition).
10. S.M. Green, D.M. Grant, and N.R. Kelly: Powder Metall., 1997, vol. 40, pp. 43–47.10.1179/pom.1997.40.1.43 ↗
11. J.C. Hey and A.P. Jardine: Mater. Sci. Eng. A, 1994, vol. A188, pp. 291–300.10.1016/0921-5093(94)90384-0 ↗
12. J.C. Hey and A.P. Jardine: Proc. 1994 MRS Fall Meeting, Boston, MA, 1995, Materials Research Society, Pittsburgh, PA, 1994, vol. 360, pp. 483–88.10.1557/PROC-360-483 ↗
13. B.-Y. Li, L.-J. Rong, V.E. Gjunter, and Y.-Y. Li: Z. Metallkd., 2000, vol. 91, pp. 291–95.
14. Y. Li, L. Rong, and Y. Li: 1st Sino-Russian Workshop on Self-Propagating High Temperature Synthesis, Trans Tech Publications Ltd., Beijing, 2002, vol. 217, pp. 137–42.
15. J. Mentz, L. Krone, M. Bram, H.P. Buchkremer, and D. Stover: Met. Powder Rep., 2006, vol. 61, pp. 20–25.
16. R. Menini, M.-J. Dion, S.K. V. So, M. Gauthier, and L.-P. Lefebvre: J. Electrochem. Soc., 2006, vol. 153, pp. B13–B21.10.1149/1.2128098 ↗
17. W. Pompe, H. Worch, M. Epple, W. Friess, M. Gelinsky, P. Greil, U. Hempel, D. Scharnweber, and K. Schulte: Mater. Sci. Eng. A, 2003, vol. 362, pp. 40–60.10.1016/S0921-5093(03)00580-X ↗
18. S. Moreau, M.A. Thibault, M. Assad, M.A. Leroux, and N.G. Fomichev: Transactions—7th World Biomaterials Congr., Biomaterials 2004 Congress Managers, Sydney, Australia, 2004, p. 1551.
19. A.I. Lotkov, V.N. Grishkov, V.A. Udovenko, and A.V. Kuznetsov: Phys. Met. Metallogr., 1982, vol. 54, pp. 152–54 (English translation of Fizika Metallov i Metallovedenie).
20. M. Gauthier, Y. Thomas, and L. Lefebvre: Patent Application, United States, US 2005/0100470 A1, 2005.
21. L. Lefebvre and Y. Thomas: Patent Application, International Publication Number WO 03/015963 A1, 2003.
22. Annual Book of ASTM Standards, vol. 13.01, ASTM-F2004-05, ASTM International, West Conshohocken, PA, 2006, pp. 1002–05.
23. ASM Handbook Volume 02: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM International, Metals Park, OH, 1990, 1328 pp.
24. A. Fazekas, L.P. Lefebvre, M. Gauthier, R. Dendievel, and L. Salvo: 3rd Int. Conf. on Cellular Metals and Metal Foaming Technology (MetFoam 2003), J. Banhart, N.A. Fleck, and A. Mortensen, eds., Berlin, 2003, pp. 307–12.
25. X. Ren, N. Miura, J. Zhang, K. Otsuka, K. Tanaka, M. Koiwa, T. Suzuki, Y.I. Chumlyakov, and M. Asai: Mater. Sci. Eng. A (Struct. Mater.: Prop., Microstr. Process.), 2001, vol. A312, pp. 196–206.10.1016/S0921-5093(00)01876-1 ↗
26. A. Heckmann and E. Hornbogen: Int. Conf. on Martensitic Transformations, EDP Sciences, Espoo, Finland, 2003, vol. 112 II, pp. 831–34.10.1051/jp4:20031010 ↗
27. A. Chernyshov, M. Leroux, M. Assad, A. Dujovne, and E. Garcia-Belenguer: Advanced Materials for Biomedical Applications, Conf. of Metallurgists (COM2002), D. Mantovani, ed., MetSoc, Montreal, 2002, pp. 109–19.
28. D.C. Lagoudas, P.B. Entchev, and E.L. Vandygriff: Smart Structures and Materials: Active Materials: Behavior and Mechanics, The International Society for Optical Engineering, San Diego, CA, 2002, vol. 4699, pp. 224–34.10.1117/12.474979 ↗
29. Y.-H. Li, L.-J. Rong, and Y.-Y. Li: J. Alloys Compd., 2002, vol. 345, pp. 271–74.10.1016/S0925-8388(02)00412-7 ↗