journal article·2015-07

Design of an Eta-Phase Precipitation-Hardenable Nickel-Based Alloy with the Potential for Improved Creep Strength Above 1023 K (750 °C)

Matthew J. Wong, Paul G. Sanders, John P. Shingledecker, Calvin L. White

Publisher page

Abstract

In a number of nickel-based superalloy systems strengthened by gamma prime (γ′), eta-phase (Ni3Ti, η) forms during prolonged high-temperature exposure, but its effect on mechanical properties is not well characterized. Using thermodynamic modeling and design-of-experiments techniques, three modifications of the nickel-based superalloy Nimonic (Nimonic® is a trademark of Special Metals Corporation group of companies.) 263 were identified that yield increased volume fractions of the eta-phase (Ni3Ti, η) at temperatures above 1023 K (750 °C). Volume fractions of η-phase were evaluated for each alloy and heat-treatment condition using optical microscopy, scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction. Compared to Nimonic 263, small additions of V and Ta were found to increase the volume fraction of η-phase above 1023 K (750 °C) from approximately 5 pct to above 15 pct, thus providing a route for future mechanical behavior experimental studies, which was not in the scope of this work.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. J.P. Shingledecker and I.G. Wright: Proceedings to the 8th Liege Conference on Materials for Advanced Power Engineering 2006, Forschungszentrum Jülich GmbH, 2006, pp. 107–120.
2. R. Viswananthan, J.F. Henry, J. Tanzosh, G. Stanko, J. Shingledecker, B. Vitalis, R. Purgert. J. Mater. Eng. Perform. Vol. 14(3) 2005, 281–92.10.1361/10599490524039 ↗
3. J.P. Shingledecker, G.M. Pharr: Metall. Mater. Trans. A., Vol. 43 (2012). 1902–10. doi:10.1007/s11661-011-1013-4.10.1007/s11661-011-1013-4 ↗
4. J.P. Shingledecker, N.D. Evans, G.M. Pharr: Mater. Sci. Eng. A. 578 (2013) 277–86. doi:10.1016/j.msea.2013.04.087.10.1016/j.msea.2013.04.087 ↗
5. N.D Evans, P.J. Maziasz, R.W. Swindeman, G.D. Smith (2004). Scripta Mater. 51: 503–07.10.1016/j.scriptamat.2004.05.047 ↗
6. J.C. Zhao, V. Ravikumar, A.M. Beltran (2001) Metall. Mater. Trans. A 32A: 1271–82.10.1007/s11661-001-0217-4 ↗
7. C.T. Sims, N. S. Stoloff, W.C. Hagel (1987) Superalloys II: High-Temperature Materials for Aerospace and Industrial Power. Wiley, New York
8. M.J. Donachie (1984). Superalloys: A Technical Guide. Metals Park, Ohio, American Society for Metals.
9. R.C. Ecob, J. V. Bee, B. Ralph (1979) J. Microsc. 161: 141–50.10.1111/j.1365-2818.1979.tb00197.x ↗
10. H. Sugimura, Y. Kaneno, T. Takasugi (2010). Mater. Trans. 51(1): 72–77.10.2320/matertrans.M2009316 ↗
11. H. Sugimura, Y. Kaneno, T. Takasugi (2011). “Alloying Behavior of Ni3M-Type Compounds with D0a Structure.” Materials Transactions 52 (4): 667–71.10.2320/matertrans.M2010386 ↗
12. S. Asgari, R. Sharghi-Moshtaghin, M. Sadegh-Ahmadi, P. Pirouz. (2013). Philosophical Magazine 93(10-12): 1351–70.10.1080/14786435.2013.773106 ↗
13. K. Tomihisa, Y. Kaneno, T. Takasugi (2002). Intermetallics 10: 247–54.10.1016/S0966-9795(01)00131-5 ↗
14. W. Soga, Y. Kaneno, T. Takasugi (2006) Intermetallics 14: 170–79.10.1016/j.intermet.2005.05.002 ↗
15. R.E. Watson, L.H. Bennett (1978) Phys. Rev. B 18(12): 6439–49.10.1103/PhysRevB.18.6439 ↗
16. B.D. Cullity, S.R. Stock (2001). Elements of X-Ray Diffraction. Upper Saddle River, Prentice Hall, NJ.
17. G.F. Vander Voort (1984). Metallography, Principles and Practice, ASM International, Metals Park.10.31399/asm.tb.mpp.9781627082600 ↗
18. S. Asgari (2006). Metall. Mater. Trans. A. 37A: 2051–57.10.1007/BF02586125 ↗
19. G.V.S. Murthy, S. Ghosh, M. Das, G. Das, R.N. Ghosh (2007) Mater. Sci. Eng. A. 488: 298-405.