journal article·2005-04

Analysis of lattice parameter changes following deformation of a 0.19C-1.63Si-1.59Mn transformation-induced plasticity sheet steel

A. M. Streicher-Clarke, J. G. Speer, D. K. Matlock, D. L. Williamson, B. C. DeCooman

Publisher page

Abstract

Austenite and ferrite lattice parameters were monitored using X-ray diffraction subsequent to deformation in uniaxial and biaxial tension and plane straining of a 0.19C-1.63Si-1.59Mn transformation-induced plasticity (TRIP) sheet steel. Details from peak position results suggest the presence of stacking faults in the austenite phase, especially after deformation in uniaxial tension. The results also indicate residual stress or composition effects (through changes in the average carbon concentration due to selective transformation of lower carbon regions of austenite). Compressive residual stresses in the ferrite matrix were measured, and found to increase with increasing effective strain in specimens tested in biaxial tension and plane strain. Strain partitioning between softer ferrite and harder austenite (and possibly bainite or martensite) may be responsible for these residual compressive stresses in the ferrite, although volume expansion from the γ → α′ transformation and texture gradients through the sheet thickness are also possible contributors.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. A.M. Streicher: Master’s Thesis, Colorado School of Mines, Golden, CO, 2002.
2. P.J. Withers and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17, pp. 355–65.10.1179/026708301101509980 ↗
3. P.J. Withers and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17, pp. 366–75.10.1179/026708301101510087 ↗
4. Q. Furnémont, P. Jacques, T. Pardoen, F. Lani, S. Godet, P. Harlet, K. Conlon, and F. Delannay: Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, B.C. DeCooman, ed., Wissenschaftsverlag Mainz GmbH, Aachen, Germany, 2002, pp. 303–09.
5. K. Sugimoto, M. Kobayashi, and S. Yasuki: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2637–44.10.1007/s11661-997-0020-y ↗
6. K. Sugimoto, M. Kobayashi, H. Matsushima, and S. Hashimoto: Trans. Jpn. Soc. Mech. Eng., 1995, vol. 16A, pp. 80–86 (in Japanese).10.1299/kikaia.61.80 ↗
7. K. Sugimoto, M. Kobayashi, S. Yasuki, and S. Hashimoto: Mater. Trans. JIM, 1995, vol. 36 (5), pp. 632–38.10.2320/matertrans1989.36.632 ↗
8. L. Barbé, B.C. De Cooman, and K. Conlon: Z. Metallkd., 2002, vol. 93, pp. 1217–27.10.3139/146.021217 ↗
9. B.D. Cullity: Elements of X-ray Diffraction, 2nd ed., Addison-Wesley Publishing Co., Inc., Reading, MA, 1978, pp. 285–292, 350–368, 411–415, 447–456, and 508.
10. B.E. Warren: in X-ray Diffraction, Morris Cohen, ed., Addison-Wesley Publishing Company, Inc., Reading, MA, 1969, pp. 275–98.
11. S.C. Baik, S.H. Park, O. Kwon, D. Kim, and K.H. Oh: Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, B.C. DeCooman, ed., Wissenschaftsverlag Mainz GmbH, Aachen, Germany, 2002, pp. 303–09.
12. A.K. De, J.G. Speer, and D.K. Matlock: Adv. Mater. Processes, 2003, vol. 161, pp. 27–30.
13. ASTM E8-01, 2001 Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 2001, vol. 3.01, p. 58.
14. K.S. Raghavan: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2075–84.10.1007/BF02670679 ↗
15. I.C. Noyan and J.B. Cohen: Residual Stress, Springer-Verlag, New York, NY, 1987, pp. 122–23.10.1007/978-1-4613-9570-6 ↗
16. N.J. Wagner, J.P. Boisseau, and E.N. Aqua: Trans. TMS-AIME, 1965, vol. 233, pp. 1280–86.
17. C.N.J. Wagner: in Local Atomic Arrangements Studied by X-ray Diffraction, J.B. Cohen and J.E. Hilliard, eds., American Institute of Mining, Metallurgical and Petroleum Engineers, Inc., Chicago, IL, 1965–66, vol. 36, pp. 219–69.
18. B.D. Cullity and S.R. Stock: Elements of X-ray Diffraction, 3rd ed., Prentice-Hall, Upper Saddle River, NJ, 2001, pp. 375–77.
19. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill, New York, NY, 1986, p. 50.
20. W.C. Johnson: in Lectures on the Theory of Phase Transformations, 2nd ed., H.I. Aaronson, ed., TMS, Warrendale, PA, 1975, p. 64.
21. J.J. Moverare and M. Odén: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 57–71.10.1007/s11661-002-0005-9 ↗
22. J. Johansson, M. Odén, and X.-H. Zeng: Acta Mater., 1999, vol. 47 (9), pp. 2669–84.10.1016/S1359-6454(99)00149-4 ↗
23. P. Jacques and E. Girault: 19th ASM Heat Treating Society Conf. Proc., ASM INTERNATIONAL, Materials Park, OH, 1999, pp. 24–30.
24. P.J. Jacques, J. Ladriére, and F. Delannay: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2759–68.10.1007/s11661-001-1027-4 ↗
25. A. Itami, M. Takahashi, and K. Ushioda: Iron Steel Inst. Jpn. Int., 1995, vol. 35 (9), pp. 1121–27.10.2355/isijinternational.35.1121 ↗