journal article·2013-02

Austenite Grain Structures in Ti- and Nb-Containing High-Strength Low-Alloy Steel During Slab Reheating

S. Roy, D. Chakrabarti, G. K. Dey

Publisher page

Abstract

Austenite-grain growth was investigated in a couple of microalloyed steels, one containing Ti and the other containing Nb, Ti, and V, using different reheating temperatures between 1273 K and 1523 K (1000 °C and 1250 °C). Nature and distribution of microalloy precipitates were quantitatively analyzed before and after reheating. Interdendritic segregation (or microsegregation) during casting can result in an inhomogeneous distribution of microalloy precipitates in the as-cast slabs, which can create austenite grain size variation (even grain size bimodality) after reheating. Ti addition reduced the grain size variation; however, it could not eliminate the grain size bimodality in Nb-containing steel, due to the differential pinning effect of Nb precipitates. A model was proposed for the prediction of austenite grain size variation in reheated steel by combining different models on microsegregation during solidification, thermodynamic stability, and dissolution of microalloy precipitates and austenite grain growth during reheating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, 1997, Book 615, pp. 230–60.
2. G. Tither: Proc. 2nd Int. Conf. on ‘HSLA Steels: Processing, Properties and Applications,’ Baijing, China, 1990, G. Tither, S. Zhang, and J.S.X.H. Zhongguo, eds., TMS, Warrendale, PA, 1992, pp. 61–80.
3. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, 2nd ed., Stanley Thornes Ltd., Cheltenham, 2000, pp. 139–242.
4. T. Gladman: Proc. R. Soc., Lond., 1966, vol. 294, pp. 298–309.10.1098/rspa.1966.0208 ↗
5. L.J. Cuddy and J.C. Raley: Metall. Trans. A, 1983, vol. 14A, pp. 1989–95.10.1007/BF02662366 ↗
6. E.J. Palmiere, C.I. Garcia, and A.J. DeArdo: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 277–86.10.1007/BF02647973 ↗
7. D. Chakrabarti, C. Davis, and M. Strangwood: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1963–77.10.1007/s11661-008-9535-0 ↗
8. D. Chakrabarti, C.L. Davis, and M. Strangwood: Mater. Sci. Technol., 2009, vol. 25, pp. 8939–46.10.1179/174328408X374694 ↗
9. A. Kundu, C.L. Davis, and M. Strengwood: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 994–1001.10.1007/s11661-009-0167-9 ↗
10. D. Chakrabarti, M. Strangwood, and C.L. Davis: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 780–95.10.1007/s11661-009-9794-4 ↗
11. S.J. Wu and C.L. Davis: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 456–60.
12. J.H. Chen, L. Zhu, and H. Ma: Acta Metall. Mater., 1990, vol. 38, pp. 2527–35.10.1016/0956-7151(90)90264-H ↗
13. C.L. Davis and M. Strangwood: J. Mater. Sci., 2002, vol. 37, pp. 1083–90.10.1023/A:1014342800399 ↗
14. C. Zener: quoted by C.S. Smith, Trans. TMS-AIME, 1948, vol. 175, pp. 15–51.
15. E. Nes, N. Ryum, and O. Hunder: Acta Metall., 1985, vol. 33, pp. 11–22.10.1016/0001-6160(85)90214-7 ↗
16. J.C. Bruno and P.R. Rios: Scripta Metall., 1995, vol. 32, pp. 601–06.10.1016/0956-716X(95)90844-A ↗
17. R. Elst, J.V. Humbeeck, and I. Delaey: Acta Metall., 1988, vol. 36, pp. 1723–29.10.1016/0001-6160(88)90240-4 ↗
18. D. Chakrabarti: Ph.D. Thesis, University of Birmingham, Birmingham, United Kingdom, 2007, pp. 257–74.
19. S. Suzuki, G.C. Weatherly, and D.C. Houghton: Acta Metall., 1987, vol. 35, pp. 341–52.10.1016/0001-6160(87)90242-2 ↗
20. K.A. Alogab, D.K. Matlock, J.G. Speer, and H.J. Kleebe: ISIJ Int., 2007, vol. 47, pp. 307–16.10.2355/isijinternational.47.307 ↗
21. J. Moon, S. Kim, J. Lee, and C. Lee: Metall. Mater. Trans A, 2007, vol. 38A, pp. 2788–95.10.1007/s11661-007-9317-0 ↗
22. D. Chakrabarti, C.L. Davis, and M. Strangwood: Mater. Charact., 2007, vol. 58 (5), pp. 423–38.10.1016/j.matchar.2006.06.014 ↗
23. S. Roy, S. Patra, S. Neogi, A. Laik, S.K. Chowdhuri, and D. Chakrabarti: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1845–60.10.1007/s11661-011-1045-9 ↗
24. B. Mintz, W.B. Morrison, and R.C. Cochrane: Proc. Conf. on Advances in the Physical Metallurgy and Applications of Steels, Metals Society, Liverpool, London, 1982, Book 284, pp. 222–28.
25. N. Gao and T.N. Baker: ISIJ Int., 1988, vol. 38, pp. 744–51.10.2355/isijinternational.38.744 ↗
26. A. Ruiz-Aparicio: Master’s Thesis, University of Pittsburgh, Pittsburgh, PA, 2004, pp. 76–126.
27. J.M. Cabrera, A. Al Omar, and J.M. Prado: J. Mater. Sci., 1996, vol. 31, pp. 1303–09.10.1007/BF00353110 ↗
28. J. Fernandez, S. Illescas, and J.M. Guilemany: Mater. Lett., 2007, vol. 61, pp. 2389–92.10.1016/j.matlet.2006.09.021 ↗
29. J. Moon, C. Lee, S. Uhm, and S. Lee: Acta Metall., 2006, vol. 54, pp. 1053–61.
30. Y.M. Won and B.G. Thomas: Metall. Mater. Trans A, 2001, vol. 32A, pp. 1755–67.10.1007/s11661-001-0152-4 ↗
31. S.K. Choudhary and A. Ghosh: ISIJ Int., 2009, vol. 49, pp. 1819–27.10.2355/isijinternational.49.1819 ↗
32. T.W. Clyne and W. Kurz: Metall. Trans. A, 1981, vol. 12A, pp. 965–71.10.1007/BF02643477 ↗
33. J. Kunze, C. Mickel, M. Leonhardt, and S. Oswald: Steel Res., 1997, vol. 68, pp. 403–08.10.1002/srin.199700574 ↗
34. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications, Aedermannsdorf, Switzerland, 1989, pp. 290–95.
35. R.M. Poths, R.L. Higginson, and E.J. Palmiere: Scripta Mater., 2001, vol. 44, pp. 147–51.10.1016/S1359-6462(00)00617-5 ↗
36. K. Banerjee, M. Militzer, M. Perez, and X. Wang: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3161–72.10.1007/s11661-010-0376-2 ↗
37. C. Zener: J. Appl. Phys., 1949, vol. 20, pp. 950–53.10.1063/1.1698258 ↗
38. T. Gladman and D.J. Senogles: Proc. Conf. on ‘Titanium Technology in Microalloyed Steels’, T.N. Baker, ed., Institute of Materials, London, 1997, pp. 83–90.
39. M. Chapa, S.F. Medina, V. Lopez, and B. Fernandez: ISIJ Int., 2002, vol. 42, pp. 1288–96.10.2355/isijinternational.42.1288 ↗
40. A. Echeverría and J.M. Rodriguez-Ibabe: Mater. Sci. Eng. A, 2003, vol. 346, pp. 149–58.10.1016/S0921-5093(02)00538-5 ↗
41. W.B. Li and K.E. Easterling: Acta Metall. Mater., 1990, vol. 38, pp. 1045–52.10.1016/0956-7151(90)90177-I ↗
42. S.P. Ringer, W.B. Li, and K.E. Easterling: Acta Metall. Mater., 1989, vol. 37, pp. 1045–52.10.1016/0001-6160(89)90010-2 ↗
43. B. Garbarz: J. Mater. Process. Technol., 1995, vol. 53, pp. 147–58.10.1016/0924-0136(95)01971-G ↗
44. S. Marapoulos, K. Karagiannis, and N. Ridley: J. Mater. Sci., 2007, vol. 42, pp. 1309–20.10.1007/s10853-006-1191-4 ↗
45. L.M. Fu, H.R. Wang, and A.D. Shan: Mater. Sci. Technol., 2011, vol. 27, pp. 996–1001.10.1179/1743284711Y.0000000001 ↗
46. Q. Yu and Y. Sun: Mater. Sci. Eng. A, 2006, vol. 420, pp. 34–38.10.1016/j.msea.2006.01.027 ↗