Low-Temperature Carburization of the Ni-base Superalloy IN718: Improvements in Surface Hardness and Crevice Corrosion Resistance
Source abstract
Abstract
“Case-hardening” of the Ni-base superalloy IN718 has been achieved by low-temperature gas-phase carburization. After carburization under optimum conditions, the hardened surface layer (the “case”) has about twice the hardness of the core (HV of ≈800) and contains ≈12 at pct carbon in interstitial solid solution. This causes a lattice parameter expansion of ≈1 pct perpendicular to the surface and, because of the mechanical constraint provided by the noncarburized core below, develops a large biaxial surface compressive residual stress (≈1.9 GPa) parallel to the surface. Microstructural studies and X-ray diffractometry reveal no carbide precipitates in the case. In agreement with this observation, low-temperature carburization does not compromise the ductility and actually improves the crevice corrosion resistance of the alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. D.F. Paulonis, J.M. Oblak, and D.S. Duvall: Trans ASM, 1969, vol. 62, pp. 611-22.
2. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: Metall. Trans. A, 1992, vol. 23A, pp. 2015-28.10.1007/BF02647549 ↗
3. A. Oradei-Basile and J.F. Radavich: Superalloys 718, 625, and Derivatives, Ed. E.A. Loria, TMS, Warrendale, PA, 1991, pp. 325-35.10.7449/1991/Superalloys_1991_325_335 ↗
4. E.A. Loria: Superalloys 718, 625, 706 and Various Derivatives, Proc. Int. Symp., TMS, Warrendale, PA, 1997, pp. 835-39.10.7449/1997/Superalloys_1997_835_839 ↗
5. F. Dethorey, F.S. Pettit, G.H. Meier, and N. Birks: Materials Solutions, 1998, pp. 173–76.
6. H. Han, S. Baba, and H. Kitagawa: Vacuum, 2005, vol. 78, pp. 27-32.10.1016/j.vacuum.2004.12.010 ↗
7. N. Tabet, I. Allen, and R.C. Yin: Appl. Surf. Sci., 2002, vol. 195, pp. 166-74.10.1016/S0169-4332(02)00542-1 ↗
8. P.K. Aw, A.W. Batchelor, and N.L. Loh: Surface Coating Technol., 1997, vol. 89, pp. 70-76.10.1016/S0257-8972(96)02937-4 ↗
9. P.C. Williams and S.R. Collins: JOM, 2008, vol. 60, pp. 27-30.10.1007/s11837-008-0161-5 ↗
10. Y. Cao, F. Ernst, and G.M. Michal: Acta Mater., 2003, vol. 51, pp. 4171-81.10.1016/S1359-6454(03)00235-0 ↗
11. G.M. Michal, F. Ernst, and A.H. Heuer: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1819-24.10.1007/s11661-006-0124-9 ↗
12. G.M. Michal, F. Ernst, H. Kahn, Y. Cao, F. Oba, N. Agarwal, and A.H. Heuer: Acta Mater., 2006, vol. 54, pp. 1597-606.10.1016/j.actamat.2005.11.029 ↗
13. F.J. Martin, E.J. Lemieux, T.M. Newbauer, R.A. Bayles, P.M. Natishan, H. Kahn, G.M. Michal, F. Ernst, and A.H. Heuer: ESL, 2007, vol. 10, pp. C76-C78.
14. T.-F. Chen, G.P. Tiwari, Y Iijima, and K Yamauchi, Metall. Mater. Trans. A, 2003, vol. 44A, pp. 40-46.
15. P. Moulin, A.M. Huntz, and P. Lacombe: Acta Metall. Mater., 1979, vol. 27, p. 1431.10.1016/0001-6160(79)90165-2 ↗
16. A.W. Bowen and G.M. Leak: Metall. Trans., 1970, vol. 6, pp. 1695-700.10.1007/BF02642019 ↗
17. J.J. Lander, H.E. Kern, and A.L. Beach: J. Appl. Phys., 1952, vol. 23, pp. 1305-09.10.1063/1.1702064 ↗
18. P. Thibaux, A. Metenier, and C. Xhoffer: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1169-76.10.1007/s11661-007-9150-5 ↗
19. M.S.A. Karunaratne and R.C. Reed: Acta Mater., 2003, vol. 51, pp. 2905-19.10.1016/S1359-6454(03)00105-8 ↗
20. M. Krcmar, C.L. Fu, A. Janotti, and R.C. Reed: Acta Mater., 2005, vol. 53, pp. 2369-76.10.1016/j.actamat.2005.01.044 ↗
21. M.S.A. Karunaratne and R.C. Reed: Defect Diff. Forum, 2005, pp. 237-40, 420-5.
22. R.V. Patil and G.B. Kale: J. Nucl. Mater., 1996, vol. 230, pp. 57-60.10.1016/0022-3115(96)80010-9 ↗
23. F.J. Martin, K.E. Lucas, and E.A. Hogan: Rev. Sci. Instrum., 2002, vol. 73, pp. 1273-76.10.1063/1.1448903 ↗
24. H.W. King and E.A. Payzant: Can. Metall. Q. 2001, vol. 40, pp. 385-94.10.1179/cmq.2001.40.3.385 ↗
25. B.D. Cullity: Elements of X-ray Diffraction, 2nd ed., Addison-Wesley, London, UK, 1978, pp. 447-66.
26. Y. Ono, T. Yuri, H. Sumiyoshi, E. Takeuchi, S. Matsuoka, and T. Ogata: Mater. Trans., 2004, vol. 45, pp. 342-45.10.2320/matertrans.45.342 ↗
27. S. Suresh: Fatigue of Materials, 2nd ed., Cambridge University Press, Cambridge, UK, 1998, p. 225.10.1017/CBO9780511806575 ↗
28. H. Asteman, J.-E. Svensson, L.-G. Johansson, and M. Norell: Oxid. Met., 1999, vol. 52, pp. 95-111.10.1023/A:1018875024306 ↗
29. F. Ernst, Y. Cao, G.M. Michal, and A.H. Heuer: Acta Mater., 2007, vol. 55, pp. 1895-906.10.1016/j.actamat.2006.09.049 ↗
30. F.J. Martin, E.J. Lemieux, P.M. Natishan, T.M. Newbauer, R.A. Bayles, R.J. Rayne, H. Kahn, G.M. Michal, F. Ernst, and A.H. Heuer: ECST, 2007, vol. 3, pp. 613-22.10.1149/1.2789261 ↗
31. L. Zwell, E.J. Fasiska, Y. Nakada, and A.S. Keh: Trans. TMS-AIME, 1968, vol. 242, pp. 765-66.
32. N. Agarwal, H. Kahn, A. Avishai, G.M. Michal, F. Ernst, and A.H. Heuer: Acta Mater., 2007, vol. 55, pp. 5572-80.10.1016/j.actamat.2007.06.025 ↗