A Constitutive Equation for Grain Boundary Sliding: An Experimental Approach
Source abstract
Abstract
Although grain boundary sliding (GBS) has been recognized as an important process during high-temperature deformation in crystalline materials, there is paucity in experimental data for characterizing a constitutive equation for GBS. High-temperature tensile creep experiments were conducted, together with measurements of GBS at different strains, stresses, grain sizes, and temperatures. Experimental data obtained on a Mg AZ31 alloy demonstrate that, for the first time, dynamic recrystallization during creep does not alter the contribution of GBS to creep during high-temperature deformation. The experimentally observed invariance of the sliding contribution with strain was used together with the creep data for developing a constitutive equation for GBS in a manner similar to the standard creep equation. Using this new approach, it is demonstrated that the stress, grain size, and temperature dependence for creep and GBS are identical. This is rationalized by a model based on GBS controlled by dislocations, within grains or near-grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Magnesium Alloys: Properties and Applications · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. J.E. Bird, A.K. Mukherjee, and J.E. Dorn: Quantitative relation between properties and microstructure, D. G. Brandon and A. Rosen, eds., Israel university press, Jerusalem, 1969, p. 255.
2. R. N. Stevens: Metall. Rev., 1966, vol. 11, pp. 129-42.10.1179/095066066790138266 ↗
3. R.L. Bell and T.G. Langdon: Interfaces conf., R.C. Gifkins, ed., 1969, pp. 115–37.
4. R. Raj and M. F. Ashby: Acta Metall. 1975, vol. 23, pp. 653-66.10.1016/0001-6160(75)90047-4 ↗
5. H. Reidel: Fracture at High Temperature, Springer-Verlag, Berlin, 1987.10.1007/978-3-642-82961-1 ↗
6. J. Koike, R. Ohyama, T. Kobayashi, M. Suzuki, and K. Maruyama: Mater. Trans., 2003, vol. 44, pp. 445–51.10.2320/matertrans.44.445 ↗
7. K.S. Kumar, H. Van Swygenhoven, and S. Suresh: Acta Mater., 2003, vol. 51, 5743–74.10.1016/j.actamat.2003.08.032 ↗
8. R. Z. Valiev, and T. G. Langdon: Prog. Mater. Sci., 2006, vol. 51, pp. 881-981.10.1016/j.pmatsci.2006.02.003 ↗
9. W. R. Cannon: Phil. Mag., 1972, vol. 25, pp. 1489-97.10.1080/14786437208223868 ↗
10. I. M. Lifshitz: Soviet Phys. JETP, 1963, vol. 17, pp. 909-20.
11. W.A. Rachinger: J Inst. Met., 1952–1953, vol. 81, pp. 33–41.10.1093/ptj/33.2.81 ↗
12. T. G. Langdon and R.B. Vastava: in Mechanical Testing for Deformation Model Development, R.W. Rhode, J.C. Swearengen, eds., STP 765, American Society for Testing Materials, Philadelphia 1982, pp. 435–51.10.1520/STP28901S ↗
13. R. Raj and M. F. Ashby: Metall. Trans., 1971, vol. 2, pp. 1113-27.10.1007/BF02664244 ↗
14. R. S. Gates: Acta Metall., 1973, vol. 21, pp. 855-64.10.1016/0001-6160(73)90142-9 ↗
15. R.C. Pond, D.A. Smith, and P.W.J. Southerden: Proc. Inter. Conf. Strength Meter-4 (ICSMA-4), 1976, pp. 378–82.
16. K. A. Padmanabhan: Mater. Sci. Eng., 1977, vol. 29, pp. 1-18.10.1016/0025-5416(77)90140-9 ↗
17. A. Ball and M. M. Hutchinson: Met. Sci. J., 1969, vol. 3, pp. 1-6.10.1016/0036-9748(69)90167-7 ↗
18. T. G. Langdon: Phil. Mag., 1970, vol. 22, pp. 689-700.10.1080/14786437008220939 ↗
19. R. C. Gifkins: J Aust. Inst. Metals, 1973, vol. 18, pp. 137-45.
20. F. W. Crossman and M. F. Ashby: Acta Metall., 1975, vol. 23, pp. 425-40.10.1016/0001-6160(75)90082-6 ↗
21. T. G. Langdon: Acta Metall. Mater., 1994, vol. 42, pp. 2437-43.10.1016/0956-7151(94)90322-0 ↗
22. R. L. Bell and T. G. Langdon: J Mater. Sci., 1967, vol. 2, pp. 313-23.10.1007/BF00572414 ↗
23. S. V. Raj: J Mater. Sci., 1991, vol. 26, pp. 1000-8.10.1007/BF00557142 ↗
24. A. H. Chokshi, A. ° K. Mukherjee and T. G. Langdon: Mater. Sci. Eng., 1993, vol. R10, pp. 237-74.10.1016/0927-796X(93)90009-R ↗
25. T. Watanabe: Metall. Trans., 1983, vol. 16A, pp. 531-45.10.1007/BF02643771 ↗
26. T. Watanabe, S. -I. ° Kimura and S. ° Karashima: Phil. Mag., 1984, vol. 49, pp. 845- 64.10.1080/01418618408236566 ↗
27. R. S. ° Kottada and A. H. Chokshi: Metall. Mater. Trans., 2007, vol. 38A, pp. 1743- 49.10.1007/s11661-007-9190-x ↗
28. M.M. Myshlaev, H.J. McQueen, A. Mwembela and E. Konopleva: Mater. Sci. Eng., 2002, vol. A337, pp. 121–33.10.1016/S0921-5093(02)00007-2 ↗
29. J.A. Del Valle, M.T. Perez-Prado, and O.A. Ruano: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1427–38.10.1007/s11661-005-0235-8 ↗
30. S. S. Vagarali and T. G. Langdon: Acta Metall., 1981, vol. 29, pp. 1969-82.10.1016/0001-6160(81)90034-1 ↗
31. S. S. Vagarali and T. G. Langdon: Acta Metall., 1982, vol. 30, pp. 1157-70.10.1016/0001-6160(82)90009-8 ↗
32. K. Maruyama, M. Suzuki and H. Sato: Metall. Trans., 2002, vol. 33A, pp. 875-82.10.1007/s11661-002-0157-7 ↗
33. H. Watanabe, H. Tsutisui, T. Mukai, M. ° Kohzu, S. Tanabe and ° K. Higashi: Int. J plasticity, 2001, vol. 17, pp. 387-97.10.1016/S0749-6419(00)00042-5 ↗
34. W. J. ° Kim, S. W. Chung, C. S. Chung and D. ° Kum: Acta Mater., 2001, vol. 49, pp. 3337-45.10.1016/S1359-6454(01)00008-8 ↗
35. K. ° Kitazono, E. Sato and ° K. ° Kuribayashi: Scripta Mater., 2001, vol. 44, pp. 2695- 88.10.1016/S1359-6462(01)00967-8 ↗
36. X. Wu and Y. Liu: Scripta Mater., 2002, vol. 46, pp. 269-74.10.1016/S1359-6462(01)01234-9 ↗
37. K. Ishikawa, H. Watanabe and T. Mukai: J Mater. Sci., 2005, vol. 40, pp. 1577-82.10.1007/s10853-005-0656-1 ↗
38. H. Somekawa, ° K. Hirai, H. Watanabe, Y. Takigawa and ° K. Higashi: Mater. Sci. Eng., 2005, vol. 407A, pp. 53-61.10.1016/j.msea.2005.06.059 ↗
39. H. Watanabe, A. Takara, H. Somekawa, T. Mukai and ° K. Higashi: Scripta Mater., 2005, vol. 52, pp. 449-54.10.1016/j.scriptamat.2004.11.011 ↗
40. H. ° K. ° Kim and W. J. ° Kim: J Mater. Sci., 2007, vol. 42, pp. 6171-76.10.1007/s10853-006-1162-9 ↗
41. R. B. Figueiredo and T. G. Langdon: J Mater. Sci., 2008, vol. 43, pp. 7366-71.10.1007/s10853-008-2846-0 ↗
42. R. Panicker, A. H. Chokshi, R. ° K. Mishra, R. Verma and P. E. ° Krajewski: Acta Mater., 2009, vol. 57, pp. 3683-93.10.1016/j.actamat.2009.04.011 ↗
43. R. B. Figueiredo and T. G. Langdon: Mater. Sci. Eng., 2009, vol. A501, pp. 105- 114.10.1016/j.msea.2008.09.058 ↗
44. C. R. Barrett and W. D. Nix: Acta Metall., 1965, vol. 13, pp. 1247-1258.10.1016/0001-6160(65)90034-9 ↗
45. F. A. Mohamed and T. G. Langdon: Acta Metall., 1974, vol. 22, pp. 779-88.10.1016/0001-6160(74)90088-1 ↗
46. Z. R. Lin, A. H. Chokshi and T. G. Langdon: J Mater. Sci., 1988, vol. 23, pp. 2712-22.10.1007/BF00547441 ↗
47. P. Yavari, T. G. Langdon: Acta Metall., 1982, vol. 30, pp. 2181-96.10.1016/0001-6160(82)90139-0 ↗
48. O. D. Sherby and P. M. Burke: Prog. Mater. Sci., 1967, vol. 13, pp. 325-90.
49. F.R.N. Nabarro: Report of a Conference on the strength of solids, The Physical Society, London, 1948, pp. 75–90.
50. C. Herring: J Appl. Phy., 1950, vol. 21, pp. 437-45.10.1063/1.1699681 ↗
51. R. L. Coble: J Appl. Phy., 1963, vol. 34, pp. 1679-82.10.1063/1.1702656 ↗
52. S. A. Shei and T. G. Langdon: Acta Metall., 1978, vol. 26, pp. 639-46.10.1016/0001-6160(78)90116-5 ↗
53. M. R. Drury, F. J. Humphreys and S. H. White: J Mater. Sci., 1989, vol. 24, pp.154-62.10.1007/BF00660947 ↗
54. J. Weertman: J Appl. Phys., 1957, vol. 28, pp. 1185-89.10.1063/1.1722604 ↗
55. Z. Horita and T. G. Langdon: Scripta Metall., 1983, vol. 17, pp. 665-70.10.1016/0036-9748(83)90399-X ↗