Influence of Gas Atmosphere Dew Point on the Galvannealing of CMnSi TRIP Steel
Source abstract
Abstract
The Fe-Zn reaction occurring during the galvannealing of a Si-bearing transformation-induced plasticity (TRIP) steel was investigated by field-emission electron probe microanalysis and field-emission transmission electron microscopy. The galvannealing was simulated after hot dipping in a Zn bath containing 0.13 mass pct Al at 733 K (460 °C). The galvannealing temperature was in the range of 813 K to 843 K (540 °C to 570 °C). The kinetics and mechanism of the galvannealing reaction were strongly influenced by the gas atmosphere dew point (DP). After the galvannealing of a panel annealed in a N2+10 pct H2 gas atmosphere with low DPs [213 K and 243 K (−60 °C and −30 °C)], the coating layer consisted of δ (FeZn10) and η (Zn) phase crystals. The Mn-Si compound oxides formed during intercritical annealing were present mostly at the steel/coating interface after the galvannealing. Galvannealing of a panel annealed in higher DP [263 K and 273 K, and 278 K (−10 °C, 0 °C, and +5 °C)] gas atmospheres resulted in a coating layer consisting of δ and Г (Fe3Zn10) phase crystals, and a thin layer of Г1 (Fe11Zn40) phase crystals at the steel/coating interface. The Mn-Si oxides were distributed homogeneously throughout the galvannealed (GA) coating layer. When the surface oxide layer thickness on panels annealed in a high DP gas atmosphere was reduced, the Fe content at the GA coating surface increased. Annealing in a higher DP gas atmosphere improved the coating quality of the GA panels because a thinner layer of oxides was formed. A high DP atmosphere can therefore significantly contribute to the suppression of Zn-alloy coating defects on CMnSi TRIP steel processed in hot dip galvanizing lines.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. C.E. Jordan, K.M. Goggins, and A.R. Marder: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2101–09.10.1007/BF02652311 ↗
2. A.R. Marder: Prog. Mater. Sci., 2000, vol. 45, pp. 191–271.10.1016/S0079-6425(98)00006-1 ↗
3. B. Mintz: Int. Mater. Rev., 2001, vol. 46, pp. 169–97.10.1179/095066001771048754 ↗
4. L. Chen, H.S. Kim, S.K. Kim, and B.C. De Cooman: ISIJ Int., 2007, vol. 47, pp. 1804–12.10.2355/isijinternational.47.1804 ↗
5. I. Hertveldt, B.C. De Cooman, and S. Claessens: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1225–32.10.1007/s11661-000-0118-y ↗
6. S. Feliu and M. Pérez-Revenga: Acta Mater., 2005, vol. 53, pp. 2857–66.10.1016/j.actamat.2005.03.003 ↗
7. M. Blumenau, M. Norden, F. Friedel, and K. Peters: Steel Res. Int., 2010, vol. 81, pp. 1125–36.10.1002/srin.201000115 ↗
8. Y.F. Gong, H.S. Kim, and B.C. De Cooman: ISIJ Int., 2008, vol. 48, pp. 1745–51.10.2355/isijinternational.48.1745 ↗
9. Y.F. Gong, H.S. Kim, and B.C. De Cooman: ISIJ Int., 2009, vol. 49, pp. 557–63.10.2355/isijinternational.49.557 ↗
10. L. Cho, M.S. Kim, Y.H. Kim, S.J. Lee, and B.C. De Cooman: Proc. 8th Int. Conf. Zinc Zinc Alloy Coated Steel Sheet (GALVATECH 2011), Genova, Italy, Associazione Italiana di Metallurgia, Milano, 2011, pp. 145–52.
11. J. Mahieu, S. Claessens, and B.C. De Cooman: Metall. Mater. Trans., 2001, vol. 32A, pp. 2905–2908.10.1007/s11661-001-1042-5 ↗
12. X.V. Eynde, J.P. Servais, and M. Lamberigts: Surf. Interface Anal., 2003, vol. 35, pp. 1004–14.10.1002/sia.1639 ↗
13. J. Mahieu, S. Claessens, B.C. De Cooman, and F. Goodwin: 6th Int. Conf. Zinc Zinc Alloy Coated Steel Sheet (GALVATECH 2004), Chicago, Illinois, 2004. Association for Iron and Steel Technology, Warrendale, 2004, pp. 529–38.
14. X.S. Li, S.I. Baek, C.S. Oh, S.J. Kim, and Y.W. Kim: Scripta Mater., 2007, vol. 57, pp. 113–16.10.1016/j.scriptamat.2007.03.040 ↗
15. L. Cho, S. Lee, M. Kim, Y. Kim, and B. C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 362–71.10.1007/s11661-012-1392-1 ↗
16. D. Huin, P. Flauder, and J.B. Leblond: Oxid Met., 2005, vol. 64, pp. 131–67.10.1007/s11085-005-5718-x ↗
17. J. Nakano, D.V. Malakhov, S. Yamaguchi, and G.R. Purdy, CALPHAD, 2007, vol. 31, pp. 125–40.10.1016/j.calphad.2006.09.003 ↗
18. J. McDermid, M. Kaye, and W. Thompson: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 215–30.10.1007/s11663-007-9028-3 ↗
19. P. Shewmon, M. Abbas, and G. Meyrick: Metall. Trans. A, 1986, vol. 17A, pp. 1523–27.10.1007/BF02650088 ↗
20. J. Dohie, J.R. Cahoon, and W.F. Caley, J Phys. Equal Differ., 2007, vol. 28, pp. 322–27.10.1007/s11669-007-9093-y ↗
21. H. Liu, Y. He, S. Swaminathan, M. Rohwerder, and L. Li: Surf. Coat. Technol., 2011, vol. 206, pp. 1237–43.10.1016/j.surfcoat.2011.08.038 ↗
22. R.W. Lynch and H.G. Drickamer: J. Phys. Chem. Solids, 1965, vol. 26, pp. 63–68.10.1016/0022-3697(65)90073-9 ↗
23. R. Belin, M. Tillard, and L. Monconduit: Acta Crystallogr C, 2000, vol. 56, pp. 267–68.10.1107/S0108270199014997 ↗
24. C. Belin and R. Belin: J. Solid State Chem., 2000, vol. 151, pp. 85–95.10.1006/jssc.2000.8626 ↗
25. A. Koster and J. Schoone: Acta Crystallogr. B, 1981, vol. 37, pp. 1905–1907.10.1107/S056774088100753X ↗
26. J. Brandon, R. Brizard, P. Chieh, R. McMillan, and W. Pearson: Acta Crystallogr. B, 1974, vol. 30, pp. 1412–17.10.1107/S0567740874004997 ↗
27. J. Mackowiak and N. Short: Int. Met. Rev., 1979, vol. 24, pp. 1-19.10.1179/095066079790136327 ↗
28. V. Rangarajan, C.C. Cheng, and L.L. Franks: Surf. Coat. Technol., 1993, vol. 56, pp. 209–14.10.1016/0257-8972(93)90253-K ↗
29. G.F. Bastin, F.J.J. van Loo, and G.D. Rieck: Zeitschrift fuer Metallkunde/Mater. Res. Adv. Tech., 1976, vol. 67, pp. 694–98.
30. V. Raghavan: J. Phys Eqilibria Diffus., 2013, vol. 34, pp. 1–3.10.1007/s11669-012-0168-z ↗
31. M. Onishi, Y. Wakamatsu, and H. Miura: Trans. Jpn. Inst. Met., 1974, vol. 15, pp. 331–37.10.2320/matertrans1960.15.331 ↗
32. P. Munroe, C. Laksmi, and B. Gleeson: Mater. Sci. Eng. A, 1998, vol. 251, pp. 87–93.10.1016/S0921-5093(98)00641-8 ↗
33. E. Baril and G. L’espérance: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 681–95.10.1007/s11661-999-1000-1 ↗
34. R. Khondker, A. Mertens, and J.R. McDermid: Mater. Sci. Eng. A, 2007, vol. 463, pp. 157–65.10.1016/j.msea.2006.09.116 ↗
35. R. Kavitha and J.R. McDermid: Proc. 8th Int. Conf. Zinc Zinc Alloy Coated Steel Sheet (GALVATECH 2011), Genova, Italy. Associazione Italiana di Metallurgia, Milano, 2011, vol., pp. 1243–53.
36. F. Li, H. Liu, W. Shi, and L. Li: J. Coat. Technol. Res., 2011, vol. 8, pp. 639–47.10.1007/s11998-011-9334-1 ↗
37. Y.F. Gong, T.J. Song, H.S. Kim, J.H. Kwak, and B.C. De Cooman: Proc Asia Pacific Galvanizing Conf., Jeju, Korea. The Corrosion Science Society of Korea, paper no. B-15, 2009.
38. V. Radmilovic, U. Dahmen, D. Gao, C.R. Stoldt, C. Carraro, and R. Maboudian: Diam. Relat. Mater., 2007, vol. 16, pp. 74–80.10.1016/j.diamond.2006.03.017 ↗