journal article·2000-03

Computer simulation of the initial rafting process of a nickel-base single-crystal superalloy

Hua Feng, Horst Biermann, Haël Mughrabi

Publisher page

Abstract

Rafting of the γ/γ′ morphology of nickel-base superalloys is a well-known phenomenon during high-temperature deformation. The initial stages of this type of directional coarsening were modeled two-dimensionally by the method of finite elements (FEs) using an energy-perturbation approach. In addition to the elastic energy density, the effect of the local difference of the hydrostatic stresses in γ and γ′ in combination with the different lattice parameters of the two phases was considered in the calculations as a further driving force. From the results of modeling, the deformation-induced internal stresses and strains were determined and used to evaluate the direction-dependent lattice parameters and lattice misfits of the two phases. The results agree well with experimentally determined values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. J.K. Tien and S.M. Copley: Metall. Trans., 1971, vol. 2, pp. 215–19.10.1007/BF02662660 ↗
2. D.D. Pearson, F.D. Lemkey, and B.H. Kear: Superalloys 1980, Proc. 4th Int. Symp. on Superalloys, J.K. Tien, S.T. Wlodek, H. Morrow, M. Gell, and G.E. Maurer, eds., ASM, Metals Park, OH, 1980, pp. 513–20.10.7449/1980/Superalloys_1980_513_520 ↗
3. R.A. MacKay and L.J. Ebert: Scripta Metall., 1983, vol. 17, pp. 1217–22.10.1016/0036-9748(83)90287-9 ↗
4. M.V. Nathal and R.A. MacKay: Mater. Sci. Eng., 1987, vol. 85, pp. 127–38.10.1016/0025-5416(87)90474-5 ↗
5. M. Feller-Kniepmeier and T. Link: Metall. Trans. A, 1989, vol. 20A, pp. 1233–38.10.1007/BF02647405 ↗
6. A. Fredholm and J.-L. Strudel: Superalloys 1984, Proc. 5th Int. Symp. on Superalloys, M. Gell, C.S. Kortovich, R.H. Bricknell, W.B. Kent, and J.F. Radavich, eds., TMS, Warrendale, PA, 1984, pp. 211–20.10.7449/1984/Superalloys_1984_211_220 ↗
7. F.R.N. Nabarro: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 513–30.10.1007/BF02648942 ↗
8. S. Draper, D. Hull, and R. Dreshfield: Metall. Trans. A, 1989, vol. 20A, pp. 683–88.10.1007/BF02667585 ↗
9. H. Biermann, S. Spangel, and H. Mughrabi: Z. Metallkd., 1996, vol. 87, pp. 403–10.
10. H. Biermann, B. von Grossmann, T. Schneider, H. Feng, and H. Mughrabi: Superalloys 1996, Proc. 8th Int. Symp. on Superalloys, R.D. Kissinger, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 201–10.10.7449/1996/Superalloys_1996_201_210 ↗
11. H. Biermann, B. von Grossmann, T. Schneider, S. Mechsner, H. Feng, and H. Mughrabi: Z. Metallkd., 1997, vol. 88, pp. 666–75.
12. B. von Grossmann, H. Biermann, S. Mechsner, and H. Mughrabi: Proc. 6th Liége Conf. on Materials for Advanced Power Engineering, Liége, J. Lecomte-Beckers, F. Schubert, and P.J. Ennis, eds., Schriften des Forschungszentrums Jülich, Reihe Energietechnik/Energy Technology, 1998, vol. 5, part III, pp. 1429–38.
13. B. von Grossmann: Ph.D. Thesis, Universität Erlangen-Nürnberg, Erlangen, 1998; Schaker Verlag, Aachen, 1999.
14. H. Biermann: Habilitation Thesis, Universität Erlangen-Nürnberg, Erlangen, 1999; Fortschritt-Berichte VDI, VDI Verlag, Düsseldorf, 1999, Reihe 5, vol. 550.
15. H. Mughrabi: The Johannes Weertman Symp., R.J. Arsenault, D. Cole, T. Gross, G. Kostorz, P.K. Liaw, S. Parameswaran, and H. Sizek, eds., TMS, Warrendale, PA, 1996, pp. 267–78.
16. J.D. Eshelby: Proc. R. Soc. A, 1957, vol. 241, pp. 376–96.
17. J.D. Eshelby: Progr. Solid Mech., I.N. Sneddon and R. Hill, eds., North-Holland Publ. Co., Amsterdam, The Netherlands, 1961, vol. 2, pp. 87–140.
18. A. Pineau: Acta Metall., 1976, vol. 24, pp. 559–64.10.1016/0001-6160(76)90101-2 ↗
19. T. Miyazaki, K. Nakamura, and H. Mori: J. Mater. Sci., 1979, vol. 14, pp. 1827–37.10.1007/BF00551021 ↗
20. J. Gayda and D.J. Srolovitz: Acta Metall., 1989, vol. 37, pp. 641–50.10.1016/0001-6160(89)90248-4 ↗
21. J. Gayda and R.A. MacKay: Scripta Metall., 1989, vol. 23, pp. 1835–38.10.1016/0036-9748(89)90467-5 ↗
22. F.R.N. Nabarro, C.M. Cress, and P. Kotschy: Acta Mater., 1996, vol. 44, pp. 3189–98.10.1016/1359-6454(95)00423-8 ↗
23. F. Louchet and A. Hazotte: Scripta Mater., 1997, vol. 37, pp. 589–97.10.1016/S1359-6462(97)00165-6 ↗
24. D.Y. Li and L.Q. Chen: Scripta Mater., 1997, vol. 37, pp. 1271–77.10.1016/S1359-6462(97)00276-5 ↗
25. T.M. Pollock and A.S. Argon: Acta Metall. Mater., 1994, vol. 42, pp. 1859–74.10.1016/0956-7151(94)90011-6 ↗
26. S. Kraft, I. Altenberger, and H. Mughrabi: Scripta Metall. Mater., 1995, vol. 32, pp. 411–16; Scripta Metall. Mater., 1995, vol. 32, p. 1903 (Erratum).10.1016/S0956-716X(99)80074-0 ↗
27. M. Véron, Y. Bréchet, and F. Louchet: Scripta Mater., 1996, vol. 34, pp. 1883–86.10.1016/1359-6462(96)00062-0 ↗
28. M. Véron, Y. Bréchet, and F. Louchet: Superalloys 1996, Proc. 8th Int. Symp. on Superalloys, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 181–90.10.7449/1996/Superalloys_1996_181_190 ↗
29. M. Fährmann, E. Fährmann, O. Paris, P. Fratzl, and T.M. Pollock: Superalloys 1996, Proc. 8th Int. Symp. on Superalloys, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 191–200.10.7449/1996/Superalloys_1996_191_200 ↗
30. Y. Mishin, N. Orekhov, I. Razumovskii, G. Alyoshin, and P. Noat: Mater. Sci. Eng. A, 1993, vol. 171, pp. 163–68.10.1016/0921-5093(93)90402-Z ↗
31. Y.N. Gornostyrev, N.D. Bakhteeva, N.I. Vinogradova, and O.V. Furzikov: Phys. Met. Metallogr. 1993, vol. 76, pp. 606–13.
32. D.J. Arrell and J.L. Vallés: Scripta Metall. Mater., 1994, vol. 30, pp. 149–53.10.1016/0956-716X(94)90030-2 ↗
33. J.L. Vallés and D.J. Arrell: Acta Metall. Mater., 1994, vol. 42, pp. 2999–3008.10.1016/0956-7151(94)90396-4 ↗
34. J.L. Vallés, D.J. Arrell, and J. Bressers: Arch. Mech., 1995, vol. 47, pp. 601–15.
35. J.-Y. Buffière and M. Ignat: Acta Metall. Mater., 1995, vol. 43, pp. 1791–97.10.1016/0956-7151(94)00432-H ↗
36. J. Svoboda and P. Lukáš: Acta Mater., 1996, vol. 44, pp. 2557–65.10.1016/1359-6454(95)00349-5 ↗
37. T.M. Pollock and A.S. Argon: Acta Metall. Mater., 1992, vol. 40, pp. 1–30.10.1016/0956-7151(92)90195-K ↗
38. S. Socrate and D.M. Parks: Acta Metall. Mater., 1993, vol. 41, pp. 2185–2209.10.1016/0956-7151(93)90389-A ↗
39. M. Véron, Y. Bréchet, and F. Louchet: Ket Eng. Mater., 1994, vols. 97–98, pp. 213–18.10.4028/www.scientific.net/KEM.97-98.213 ↗
40. M. Véron, Y. Bréchet, and F. Louchet: Acta Mater., 1996, vol. 44, pp. 3633–41.10.1016/1359-6454(96)00011-0 ↗
41. T. Ohashi, K. Hidaka, and S. Imano: Acta Mater., 1997, vol. 45, pp. 1801–10.10.1016/S1359-6454(96)00324-2 ↗
42. C. Carry, S. Dermarkar, J.L. Strudel, and B.C. Wonsiewicz: Metall. Trans. A, 1979, vol. 10A, pp. 855–60.10.1007/BF02658304 ↗
43. H.-A. Kuhn, H. Biermann, T. Ungár, and H. Mughrabi: Acta Metall. Mater., 1991, vol. 39, pp. 2783–94.10.1016/0956-7151(91)90095-I ↗
44. J. Li and R.P. Wahi: Acta Metall. Mater., 1995, vol. 43, pp. 507–17.10.1016/0956-7151(94)00252-D ↗
45. H. Biermann, M. Strehler, and H. Mughrabi: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1003–14.10.1007/BF02649768 ↗
46. H. Feng, H. Biermann, H. Mughrabi: Mater. Sci. Eng. A, 1996, vol. 214, pp. 1–16.10.1016/0921-5093(96)10255-0 ↗
47. A. Müller, T. Gnäupel-Herold, and W. Reimers: Phys. Status Solidi (a), 1997, vol. 159, pp. 375–96.10.1002/1521-396X(199702)159:2<375::AID-PSSA375>3.0.CO;2-G ↗
48. T. Ohashi, K. Hidaka, and M. Saito: Mater. Sci. Eng. A, 1997, vol. 238, pp. 42–49.10.1016/S0921-5093(97)00432-2 ↗
49. I.L. Svetlov, B.A. Golovko, A.I. Epishin, and N.P. Abalakin: Scripta Metall. Mater., 1992, vol. 26, pp. 1353–58.10.1016/0956-716X(92)90648-X ↗
50. R. Schmidt and M. Feller-Kniepmeier: Scripta Mater., 1993, vol. 29, pp. 1079–84.10.1016/0956-716X(93)90181-Q ↗
51. A. Racine and A. Hazotte: J. Phys. IV, Coll. C7, suppl. J. Phys. III, 1993, vol. 3, pp. 355–58.
52. J.-Y. Buffière, M.-C. Cheynet, and M. Ignat: Scripta Mater., 1996, vol. 34, pp. 349–56.
53. M. Saito, T. Aoyama, K. Hidaka, H. Tamaki, T. Ohashi, S. Nakamura, and T. Suzki: Scripta Mater., 1996, vol. 34, pp. 1189–94.10.1016/1359-6462(95)00636-2 ↗
54. W. Schneider: Ph.D. Thesis, Universität Erlangen-Nürnberg, Erlangen, 1993.
55. V. Sass: Diploma Thesis, Universität Erlangen-Nürnberg, Erlangen, 1993.
56. H. Mughrabi, W. Schneider, V. Sass, and C. Lang: Proc. 10th Int. Conf. on Strength of Materials, H. Oikawa, K. Maruyama, S. Takeuchi, M. Yamaguchi, eds., The Japan Institute of Metals, Sendai, 1994, pp. 705–08.
57. R.R. Keller, H.J. Maier, and H. Mughrabi: Scripta Metall. Mater., 1993, vol. 28, pp. 23–28.10.1016/0956-716X(93)90531-V ↗
58. H. Biermann, H.-A. Kuhn, T. Ungár, J. Hammer, and H. Mughrabi: ICSMA 9, Proc. 9th Int. Conf. on Strength of Metals and Alloys, Haifa, Israel, D.G. Brandon, R. Chaim, and A. Rosen, eds., Freund Publ. Comp. Ltd., London, 1991, vol. 1, pp. 421–28; High Temp. Mater: Proc., 1993, vol. 12, pp. 21–29.