Biaxial Deformation of the Magnesium Alloy AZ80
Source abstract
Abstract
The multiaxial deformation of magnesium alloys is important for developing reliable, robust models for both the forming of components and also analysis of in-service performance of structures, for example, in the case of crash worthiness. The current study presents a combination of unique biaxial experimental tests and biaxial crystal plasticity simulations using a visco-plastic self-consistent (VPSC) formulation conducted on a relatively weak AZ80 cast texture. The experiments were conducted on tubular samples which are loaded in axial tension or compression along the tube and with internal pressure to generate hoop stresses orthogonal to the axial direction. The results were analyzed in stress and strain space and also in terms of the evolution of crystallographic texture. In general, it was found that the VPSC simulations matched well with the experiments. However, some differences were observed for cases where basal 〈a〉 slip and $$ \left\{ {10\bar{1}2} \right\} $$ extension twinning were in close competition such as in the biaxial tension quadrant of the plastic potential. The evolution of texture measured experimentally and predicted from the VPSC simulations was qualitatively in good agreement. Finally, experiments and VPSC simulations were conducted on a second AZ80 material which had a stronger initial texture and a higher level of mechanical anisotropy. In the previous case, the agreement between experiments and simulations was good, but a larger difference was observed in the biaxial tension quadrant of the plastic potential.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Metal Forming Simulation Techniques · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. G. Proust, C.N. Tome, and G.C. Kaschner. Acta mater., 2007, vol. 55, pp. 2137-2148.10.1016/j.actamat.2006.11.017 ↗
2. S.R. Agnew: in Advances in Wrought Magnesium Alloys: Fundamentals of Processing, Properties and Applications, C. Bettles and M.R. Barnett, eds., 2012, Woodhead Publishing, Cambridge, U.K. pp. 63–104.
3. M.R. Barnett: in Advances in Wrought Magnesium Alloys: Fundamentals of Processing, Properties and Applications, C. Bettles and M.R. Barnett, eds., 2012, Woodhead Publishing, Cambridge, U.K. pp. 105–43.
4. J. Jain, J. Zou, C.W. Sinclair, and W.J. Poole. J. Microscopy, 2010, vol. 242, pp. 26-36.10.1111/j.1365-2818.2010.03434.x ↗
5. U.F. Kocks and D.G. Westlake. Trans. Metal. Soc. AIME, 1967, vol. 239, pp. 1107-1109.
6. B. Clausen, C.N. Tomé, D.W. Brown, and S.R. Agnew. Acta mater., 2008, vol. 56, pp. 2456-2468.10.1016/j.actamat.2008.01.057 ↗
7. S.R. Agnew, C.N. Tomé, D.W. Brown, T.M. Holden, and S.C. Vogel. Scripta mater., 2003, vol. 48, pp. 1003-1008.10.1016/S1359-6462(02)00591-2 ↗
8. R.A. Lebensohn and C.N. Tomé. Acta metall. mater., 1993, vol. 41, pp. 2611-2624.10.1016/0956-7151(93)90130-K ↗
9. J. Jain, W.J. Poole, and C.W. Sinclair. Mat.Sci. Eng. A., 2012, vol. 547, pp. 128-137.10.1016/j.msea.2012.04.003 ↗
10. H. Wang, P.D. Wu, C.N. Tomé, and Y. Huang. J. Mech. Phys. Solids, 2010, vol. 58, pp. 594-612.10.1016/j.jmps.2010.01.004 ↗
11. A. Izadbaksh, K. Inal, and R.K. Mishra: Modelling Simul. Mater. Sci., 2012, vol. 20, p. 035016.10.1088/0965-0393/20/3/035016 ↗
12. S.-H. Choi, D.H. Kim, S.S. Park, and B.S. You. Acta mater., 2010, vol. 58, pp. 320-329.10.1016/j.actamat.2009.09.010 ↗
13. H. Wang, B. Raeisinia, P.D. Wu, S.R. Agnew, and C.N. Tomé. Int. J. Solids Struct., 2010, vol. 47, pp. 2905–2917.10.1016/j.ijsolstr.2010.06.016 ↗
14. A. Jain and S.R. Agnew. Mat. Sci. Eng. A., 2007, vol. 462, pp. 29-36.10.1016/j.msea.2006.03.160 ↗
15. A.A. Luo and A.K. Sachdev: in Advances in Wrought Magnesium Alloys: Fundamentals of Processing, Properties and Applications, C. Bettles and M.R. Barnett, eds., 2012, Woodhead Publishing, Cambridge, U.K., pp. 391–426.
16. L. Jiang, J.J. Jonas, R.K. Mishra, A.A. Luo, A.K. Sachdev, and S. Godet. Acta mater., 2007, vol. 55, pp. 3899-3910.10.1016/j.actamat.2007.03.006 ↗
17. A.S. Khan, A. Pandey, T. Gnaupel-Herold, and R.K. Mishra. Int. J. Plasticity, 2011, vol. 27, pp. 688-706.10.1016/j.ijplas.2010.08.009 ↗
18. H. Wang, P.D. Wu, K.P. Boyle, and K.W. Neale. Int. J. Solids and Struct., 2011, vol. 48, pp. 1000-1010.10.1016/j.ijsolstr.2010.12.004 ↗
19. C.J. Neil and S.R. Agnew. Int. J. Plasticity, 2009, vol. 25, pp. 379-398.10.1016/j.ijplas.2008.05.003 ↗
20. J. Lévesque, K. Inal, K.W. Neale, and R.K. Mishra. Int. J. Plasticity, 2010, vol. 26, pp. 65-83.10.1016/j.ijplas.2009.05.001 ↗
21. S. Yi, J. Bohlen, F. Heinemann, and D. Letzig. Acta mater., 2010, vol. 58, pp. 592-605.10.1016/j.actamat.2009.09.038 ↗
22. J. Kim, H. Ryou, D. Kim, W. Lee, S.-H. Hong, and K. Chung. Int. J. Mech. Sci., 2008, vol. 50, pp. 1510-1518.10.1016/j.ijmecsci.2008.08.004 ↗
23. M.G. Lee, S.J. Kim, R.H. Wagoner, K. Chung, and H.Y. Kim. Int. J. Plasticity, 2009, vol. 25, pp. 70-104.10.1016/j.ijplas.2007.12.003 ↗
24. M.G. Lee, R.H. Wagoner, J.K. Lee, K. Chung, and H.Y. Kim. Int. J. Plasticity, 2008, vol. 24, pp. 545-582.10.1016/j.ijplas.2007.05.004 ↗
25. D.A. Wagner, S.D. Logan, K. Wang, T. Skszek, and C.P. Salisbury: in Magnesium Technology 2009, 2009, TMS (The Minerals, Metals and Materials Society), San Francisco.
26. M. Geiger, M. Merklein, W. Hubnatter, and M. Gruner. Prod. Eng. Devel., 2008, vol. 2, pp. 303-310.10.1007/s11740-008-0098-0 ↗
27. S.H. Safi-Naqvi, W.B. Hutchinson, and M.R. Barnett. Mat. Sci. Tech., 2008, vol. 24(10), pp. 1283-1292.10.1179/174328408X322204 ↗
28. O. Cazacu and F. Barlat. Int. J. Plasticity, 2004, vol. 20, pp. 2027-2045.10.1016/j.ijplas.2003.11.021 ↗
29. O. Cazacu, B. Plunkett, and F. Barlat. Int. J. Plasticity, 2006, vol. 22, pp. 1171-1194.10.1016/j.ijplas.2005.06.001 ↗
30. B. Plunkett, O. Cazacu, and F. Barlat. Int. J. Plasticity, 2008, vol. 24, pp. 847-866.10.1016/j.ijplas.2007.07.013 ↗
31. B. Plunkett, R.A. Lebensohn, O. Cazacu, and F. Barlat. Acta mater., 2006, vol. 54, pp. 4159-4169.10.1016/j.actamat.2006.05.009 ↗
32. M. Li, X.Y. Lou, J.H. Kim, and R.H. Wagoner. Int. J. Plasticity, 2010, vol. 26, pp. 820-858.10.1016/j.ijplas.2009.11.001 ↗
33. S. Graff, W. Brocks, and D. Steglich. Int. J. Plasticity, 2007, vol. 23, pp. 1957-1978.10.1016/j.ijplas.2007.07.009 ↗
34. F. Bachmann, R. Hielscher, and H. Schaeben: Solid State Phen., vol. 160, pp. 63–68.10.4028/www.scientific.net/SSP.160.63 ↗
35. K. Pettersen, O. Lohne, and N. Ryum. Metall. Trans. A., 1990, vol. 21A, pp. 221-230.10.1007/BF02656439 ↗
36. J. Bohlen, F. Chmelik, P. Dobron, D. Letzig, P. Lukac, and K.U. Kainer. J. Alloys Comp., 2004, vol. 378, pp. 214-219.10.1016/j.jallcom.2003.10.101 ↗
37. T. Marin, P.R. Dawson, M.A. Gharghouri, and R.B. Rogge. Acta mater., 2008, vol. 56, pp. 4183-4199.10.1016/j.actamat.2008.04.048 ↗
38. A. Higdon, E. Ohlsen, W.B. Stiles, J.A. Weese, and W.F. Riley. Mechanics of Materials. 1978, New York, NY: John Wiley & Sons.
39. B. Pan, K. Qian, H. Xie, and A. Asundi. Meas. Sci. Techno., 2009, vol. 20, p. 062001 (17 pp).10.1088/0957-0233/20/6/062001 ↗
40. F. Hild and S. Roux. Strain, 2006, vol. 42, pp. 69-80.10.1111/j.1475-1305.2006.00258.x ↗
41. M.A. Gharghouri: Ph.D. Thesis, McMaster, 1996.
42. C. Corby, C.H. Cáceres, and P. Lukác. Mat. Sci. Eng. A., 2004, vol. 387-389, pp. 22-24.10.1016/j.msea.2004.01.077 ↗
43. W.A. Backofen: Deformation Processing, 1972, Addison-Wesley.
44. J. Jain, W.J. Poole, C.W. Sinclair, and M.A. Gharghouri. Scripta mater., 2010, vol. 62, pp. 301-304.10.1016/j.scriptamat.2009.11.024 ↗
45. J. Jain, W.J. Poole, and C.W. Sinclair: in Magnesium Technology 2008, 2008. TMS (The Minerals, Metals and Materials Society), New Orleans.
46. N. Stanford, D. Atwell, A. Beer, C. Davies, and M.R. Barnett. Scripta mater., 2008, vol. 59, pp. 772-775.10.1016/j.scriptamat.2008.06.008 ↗