journal article·2004-09

The influence of explosive-driven “taylor-wave” shock prestraining on the structure/property behavior of 304 stainless steel

S. A. Maloy, G. T. Gray, C. M. Cady, R. W. Rutherford, R. S. Hixson

Publisher page

Abstract

The mechanical response of high-explosive (HE)-driven “Taylor-wave” (TW) shock-prestrained 304 stainless steel loaded to 35 to 45 GPa has been investigated in compression and tension at room temperature and compared to results from compressive testing of the annealed microstructure at a strain rate of 10−3/s. The microstructure and substructure evolution due to TW shock prestraining has been investigated using optical metallography and transmission electron microscopy. The mechanical behavior of 304 stainless steel following explosive shock prestraining is shown to exhibit a factor of 2 increase in yield stress and a significant reduction in ductility under tension. Microstructural analyses reveal a high density of twins after TW prestraining and very little production/retention of deformation-induced martensite. The current experimental results are shown to agree well with previous literature results on stainless steel samples shock-prestrained utilizing “square-topped” (ST) shock-pulse loading. This finding suggests that the peak shock pressure, which controls the total plastic strain that the sample must accommodate, is the dominant variable in shock-wave-loading defect generation and storage in 304 stainless steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. L.E. Murr: in Shock Waves and High Strain Rate Phenomena in Metals, M.A. Meyers and L.E. Murr, eds., Plenum Press, New York, NY, 1981, pp. 607–73.10.1007/978-1-4613-3219-0_37 ↗
2. G.T. Gray III: in High-Pressure Shock Compression of Solids, J.R. Asay and M. Shahinpoor, eds., Springer-Verlag, New York, NY, 1993, pp. 187–216.
3. G.T. Gray III: in ASM Handbook, vol. 8, Mechanical Testing and Evaluation, H. Kuhn and D. Medlin, eds., ASM INTERNATIONAL, Materials Park, OH, 2000, pp. 530–38.
4. M.C. Inman, L.E. Murr, and M.F. Rose: Advances in Electron Metallography ASTM, Philadelphia, PA, 1966, pp. 39–48.10.1520/STP46417S ↗
5. K.P. Staudhammer: J. Phys. IV France Coll. C3 (DYMAT 91), 1991, vol. 1, pp. 93–100.
6. L.E. Murr and F.I. Grace: Trans. TMS-AIME, 1969, vol. 245, pp. 2225–35.
7. L.E. Murr, J.V. Foltz, and F.D. Altman: Phil. Mag., 1971, vol. 23, pp. 1011–28.10.1080/14786437108217392 ↗
8. M.A. Meyers: Mater. Sci. Eng., 1981, vol. 51, pp. 261–63.10.1016/0025-5416(81)90202-0 ↗
9. K.P. Staudhammer and L.E. Murr: Mater. Sci. Eng., 1980, vol. 44, pp. 97–113.10.1016/0025-5416(80)90235-9 ↗
10. L.E. Murr and K.P. Staudhammer: Mater. Sci. Eng., 1975, vol. 20, pp. 35–46.10.1016/0025-5416(75)90128-7 ↗
11. M. Gerland and M. Hallouin: J. Mater. Sci., 1994, vol. 29, pp. 345–51.10.1007/BF01162489 ↗
12. K.A. Johnson, L.E. Murr, and K.P. Staudhammer: Acta Metall., 1985, vol. 33, pp. 677–84.10.1016/0001-6160(85)90031-8 ↗
13. E. Moin and L.E. Murr: Mater. Sci. Eng., 1979, vol. 37, pp. 249–69.10.1016/0025-5416(79)90158-7 ↗
14. M. Kangilaski, J.S. Perrin, R.A. Wullaert, and A.A. Bauer: Metall. Trans., 1971, vol. 2, pp. 2607–12.10.1007/BF02814901 ↗
15. H.-J. Kestenbach and M.A. Meyers: Metall. Trans. A, 1976, vol. 7A, pp. 1943–50.10.1007/BF02654992 ↗
16. L.E. Murr, E. Moin, F. Gruelich, and K.P. Staudhammer: Scripta Mater., 1978, vol. 12, pp. 1031–35.10.1016/0036-9748(78)90019-4 ↗
17. W.C. Leslie: in Metallurgical Effects at High Strain Rates, R.W. Rohde, B.M. Butcher, J.R. Holland, and C.H. Karnes, eds., Plenum Press, New York, NY, 1973, pp. 571–85.10.1007/978-1-4615-8696-8_34 ↗
18. A.S. Appleton and J.S. Waddington: Acta Metall., 1964, vol. 12, pp. 956–57.10.1016/0001-6160(64)90161-0 ↗
19. K. Wongwiwat and L.W. Murr: Mater. Sci. Eng., 1978, vol. 35, pp. 273–85.10.1016/0025-5416(78)90129-5 ↗
20. A.R. Champion and R.W. Rohde: J. Appl. Phys., 1970, vol. 41, pp. 2213–23.10.1063/1.1659190 ↗
21. L.E. Murr: in Shock Waves and High Strain Rate Phenomena in Metals, M.A. Meyers and L.E. Murr, eds., Plenum Press, New York, NY, 1981, pp. 753–77.10.1007/978-1-4613-3219-0_42 ↗
22. R.L. Nolder and G. Thomas: Acta Mater., 1964, vol. 12, pp. 227–40.10.1016/0001-6160(64)90192-0 ↗
23. F.I. Grace, M.C. Inman, and L.E. Murr: Br. J. Appl. Phys. (Ser. 2), 1968, vol. 1, pp. 1437–43.
24. V.I. Zeldovich, A.I. Uvarov, N.Y. Frolova, O.S. Rinkevich, N.A. Tereshchenko, and N.P. Purygin: Phys. Met. Metallogr., 1998, vol. 86, pp. 575–84.
25. L.E. Murr and J.A. Korbonski: Metall. Trans., 1970, vol. 1, pp. 3333–40.10.1007/BF03037860 ↗
26. C.R. Hills and H.J. Rack: Mater. Sci. Eng., 1981, vol. 51, pp. 231–39.10.1016/0025-5416(81)90199-3 ↗
27. J.F. Watson and J.L. Christian: ASTM STP 287, ASTM, Philadelphia, PA, 1960, pp. 170–95.
28. K.M. Carlsen and K.C. Thomas: Trans. ASM, 1962, vol. 55, pp. 462–73.
29. V.N. Krivobok and A.M. Talbot: ASTM Proc., ASTM, Philadelphia, PA, 1950, pp. 895–930.
30. P.L.J. Mangonon and G. Thomas: Metall. Trans., 1970, vol. 1, pp. 1577–86.10.1007/BF02642003 ↗
31. P.L.J. Mangonon and G. Thomas: Metall. Trans., 1970, vol. 1, pp. 1587–94.10.1007/BF02642004 ↗
32. G.W. Powell, E.R. Marshall, and W.A. Backofen: Trans. ASM, 1958, vol. 50, pp. 478–97.
33. J.P. Bressanelli and A. Moskowitz: Trans. ASM, 1966, vol. 59, pp. 223–39.
34. K.P. Staudhammer, L.E. Murr, and S.S. Hecker: Acta Metall., 1983, vol. 31, pp. 267–74.10.1016/0001-6160(83)90103-7 ↗
35. S.S. Hecker, M.G. Stout, K.P. Staudhammer, and J.L. Smith: Metall. Trans. A, 1982, vol. 13A, pp. 619–26.10.1007/BF02644427 ↗
36. L.E. Murr, K.P. Staudhammer, and S.S. Hecker: Metall. Trans. A, 1982, vol. 13A, pp. 627–35.10.1007/BF02644428 ↗
37. G.W. Form and W.M. Baldwin: Trans. ASM, 1956, vol. 48, pp. 474–85.
38. D.V. Neff, T.E. Mitchell, and A.R. Troiano: Trans. ASM, 1969, vol. 62, pp. 858–68.
39. T. Angel: J. Iron Steel Inst., 1954, pp. 165–74.
40. J.N. Johnson, G.T. Gray III, and N.K. Bourne: J. Appl. Phys., 1999, vol. 86, pp. 4892–901.10.1063/1.371527 ↗
41. J.N. Fritz: MACRAME Hydrodynamics Computer Code, Los Alamos National Laboratory, Los Alamos, NM, to be published.
42. G.T. Gray, III: in ASM Handbook, vol. 8: Mechanical Testing and Evaluation, H. Kuhn and D. Medlin, eds., ASM INTERNATIONAL, Materials Park, OH, 2000, pp. 462–76.
43. K.P. Staudhammer, C.E. Frantz, and S.S. Hecker: in Shock Waves and High Strain-Rate Phenomena in Metals, M.A. Meyers and L.E. Murr, ed., Plenum, New York, NY, 1981, pp. 91–112.10.1007/978-1-4613-3219-0_7 ↗