A through-process model of an A356 brake caliper for fatigue life prediction
Source abstract
Abstract
The demand for low-cost, high strength-to-weight ratio components continues to drive the development of aluminum alloy castings for new applications. The automotive brake caliper, which has traditionally been made from cast iron, is one such component where aluminum alloys are being considered. The fatigue performance of the brake caliper is an important consideration in evaluating new designs. The use of aluminum alloys in cast components under cyclic loading conditions necessitates a design approach that, in addition to in-service loading, incorporates the impact of microstructural features on fatigue life, In this investigation, a through-process modeling approach has been employed to link a series of mathematical models describing the processing steps of (1) casting, (2) heat treatment, (3) machining, and (4) in-service performance for a preliminary design of a brake caliper made of aluminum alloy A356. Step (1) includes microstructural predictions (secondary dendrite arm spacing and maximum pore size), which are tracked through to the final component. The final lifing of the component combines the effects of these microstructural features with the complex stress state arising from the combined service loading and residual stresses. It was found that all three factors have a strong influence upon the component's fatigue performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. B.N. Keshavaram: SAE Trans.: J. Mater. Manufacturing, 1999, vol. 108, pp. 307–24.
2. M.J. Couper, A.E. Neeson, and J.R. Griffiths: Fatigue Fract. Eng. Mater. Struct., 1990, vol. 13, pp. 213–27.10.1111/j.1460-2695.1990.tb00594.x ↗
3. J.F. Major: Trans. Am. Foundrymen’s Soc., 1998, vol. 105, pp. 901–06.
4. D.L. McLellan and M.M. McLellan: AFS Trans., 1996, vol. 104, pp. 445–53.
5. M. Samonds: Computational Modeling of Materials, Minerals and Metals Processing, Seattle, WA, Feb. 17–21, 2002, eds., J.W. Evans and C. Bailey, TMS, Warrendale, PA, pp. 3–4, 2002.
6. M. Cross, M. Bailey, K. Pericleous, A. Williams, V. Bojarevics, N. Croft, and G. Taylor: JOM-e, 2002, vol. 54.
7. H. Rafii-Tabar and A. Chirazi: Phys. Rep.-Rev. Sec. Phys. Lett., 2002, vol. 365, pp. 145–249.
8. A. Kermanpur, S. Tin, P.D. Lee, and M. McLean: JDM, March, TMS, Warrendale, PA, pp. 72–78, 2004.
9. C.Q. Bowles and J. Schijve: Int. J. Fract., 1973, vol. 9, pp. 171–79.10.1007/BF00041859 ↗
10. J.M. Hyzak and I.M. Bernstein: Metall. Trans. A, 1982, vol. 13A, pp. 33–43.10.1007/BF02642413 ↗
11. K. Tanaka and T. Mura: Metall. Trans. A, 1982, vol. 13A, pp. 117–23.10.1007/BF02642422 ↗
12. J. Lankford and D.L. Davidson: Acta Metall., 1983, vol. 31, pp. 1273–84.10.1016/0001-6160(83)90189-X ↗
13. B. Skallerud, T. Iveland, and G. Härkegård: Eng. Fract. Mech., 1993, vol. 44, pp. 857–74.10.1016/0013-7944(93)90108-5 ↗
14. S. Suresh: Fatigue of Materials, Cambridge University Press, Cambridge, United Kingdom, 1998.10.1017/CBO9780511806575 ↗
15. Q.G. Wang, D. Apelian, and D.A. Lados: J. Light Met., 2001, vol. 1, pp. 73–84.10.1016/S1471-5317(00)00008-0 ↗
16. M.E. Seniw, M.E. Fine, E.Y. Chen, M. Meshii, and J. Gray: High Cycle Fatigue of Structural Materials, TMS Fall Meeting, TMS, Warrendale, PA, 1997, pp. 371–79.
17. S.E. Stanzl-Tschegg, H.R. Mayer, A. Beste, and S. Kroll: Int. J. Fatigue, 1995, vol. 17, pp. 149–55.10.1016/0142-1123(95)95895-N ↗
18. M.J. Caton: Ph.D. Thesis, University of Michigan, Ann Arbor, MI, 2001.
19. J.M. Boileau: Ph.D. Thesis, Wayne State University, Detroit, MI, 2000.
20. J.Z. Yi, Y.X. Gao, P.D. Lee, H.M. Flower, and T.C. Lindley: Metall. Trans. A, 2003, vol. 34A, pp. 1879–91.
21. P.D. Lee, A. Chirazi, R.C. Atwood, and W. Wang: Material. Sci. Eng. A, 2004, vol. 365, pp. 57–65.10.1016/j.msea.2003.09.007 ↗
22. A. Giachino, P.D. Lee, L. Christodoulou, and S. Nishido: PRICM3: 3rd Pacific Rim Int. Conf. on Advanced Materials and Processes, VI, Honolulu, HI, July 12–16, 1998, M.A. Imam, R. DeNale, S. Hanada, Z. Zhong, and D.N. Lee, eds., TMS, Warrendale, PA, 1998, pp. 1325–30.
23. S. Nishido, R.C. Atwood, Y.M. Youssef, and P.D. Lee: Int. J. Cast. Met. Res., 2002, vol. 15, pp. 325–29.10.1080/13640461.2003.11819506 ↗
24. P.D. Lee and J.D. Hunt: Modeling of Casting, Welding and Advanced Solidification Processes VII, London, Sept. 10–15, 1995, M. Cross and J. Campbell, eds., TMS, Warrendale, PA, 1995, pp. 585–92.
25. P.D. Lee, D. See, and R.C. Atwood: Cutting Edge of Computer Simulation of Solidification and Casting, Osaka, Japan, Nov. 14–16, 1999. I. Ohnaka and H. Yasuda, eds., ISIJ, Chiyoda-leu, Tokyo, Japan, 1999, pp. 97–111.
26. R.C. Atwood and P.D. Lee: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 209–21.10.1007/s11663-002-0006-5 ↗
27. R.C. Atwood and P.D. Lee: Acta Mater., 2003, vol. 51, pp. 5447–66.10.1016/S1359-6454(03)00411-7 ↗
28. P.D. Lee, A. Chirazi, and D. See: J. Light Met., 2000, vol. 1, pp. 15–30.10.1016/S1471-5317(00)00003-1 ↗
29. W. Kurz, B. Giovanola, and R. Trivedi: Acta Metall., 1986, vol. 34, pp. 823–30.10.1016/0001-6160(86)90056-8 ↗
30. M. Imabayashi, M. Ichimura, and Y. Sasajima: J. Jpn. Inst. Light Met. (Jpn.), 1995, vol. 45, pp. 278–83.10.2464/jilm.45.278 ↗
31. D. Doutre: private communication, Alcan Int., 1993.
32. K. Tynelius, J.F. Major, and D. Apelian: Trans. Am. Foundrymen’s Soc., 1994, vol. 101, pp. 401–13.
33. Q.T. Fang, P.N. Anyalebechi, and D.A. Granger: Light Met., 1988, pp. 477–86.
34. M. Bamberger and B. Prinz: Mater. Sci. Technol., 1986, vol. 2, pp. 410–15.10.1179/mst.1986.2.4.410 ↗
35. O.C. Zienkiewicz and R.I. Taylor: The Finite Element Method, 4th ed., McGraw-Hill Book Co., New York, NY, 1994.
36. K.C. Mills: Recommended Values of Thermophysical Properties for Selected Commercial Alloys, Woodhead Publishing Limited, Cambridge, United Kingdom, 2002.10.1533/9781845690144 ↗
37. Aluminum Properties and Physical Metallurgy, J.E. Hatch, ed., ASM, Metals Park, OH, 1984.