journal article·2013-01

Effects of Thermomechanical Processing and Heat Treatment on the Tensile and Creep Properties of Boron-Modified Near Alpha Titanium Alloy Ti-1100

Vivek Chandravanshi, R. Sarkar, S. V. Kamat, T. K. Nandy

Publisher page

Abstract

Tensile properties of boron-modified near alpha titanium alloy were evaluated in α-β- and β-processed conditions after heat treatments at different solution treatment temperatures at both room temperature and 873 K (600 °C). Creep behavior was also investigated in these processing and heat-treatment conditions at 873 K (600 °C). While the yield strength (YS) and the ultimate tensile strength (UTS) did not show significant dependence on the processing history, a marginal improvement in elongation-to-failure values were observed in α-β-processed condition as compared with β-processed condition at both temperatures. Creep resistance of the alloy at 873 K (600 °C) was found to be significantly superior in β-processed condition as compared with α-β-processed condition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. C.J. Boehlert, C.J. Cowen, S. Tamirisakandala, D.J. McEldowney, and D.B. Miracle: Scripta Mater., 2006, vol. 55, pp. 465–68.10.1016/j.scriptamat.2006.05.008 ↗
2. R. Srinivasan, D. Miracle, and S. Tamirisakandala: Mater. Sci. Eng. A, 2008, vol. 487, pp. 541–51.10.1016/j.msea.2007.10.053 ↗
3. R. Srinivasan, D. Miracle, S. Tamirisakandala, K. Yu, V. Sinha, F. Sun, M. Bennett, and J.M. Scott: Titanium Science and Technology, M. Ninomi, S. Akiyama, M. Ikeda, M. Hagiwara and K. Maruyama, eds., The Japan Institute of Metals, Tokyo, 2007.
4. W. Chen and C.J. Boehlert: Mater. Sci. Eng. A, 2008, vol. 494, pp. 132–38.10.1016/j.msea.2008.04.004 ↗
5. M.J. Bermingham, S.D. McDonald, K. Nogita, D.H. St. John, and M.S. Dargush: Scripta Mater., 2008, vol. 59, pp. 538–41.10.1016/j.scriptamat.2008.05.002 ↗
6. C.J. Boehlert, S. Tamirisakandala, and D.B. Miracle: Titanium Science and Technology, M. Ninomi, S. Akiyama, M. Ikeda, M. Hagiwara, and K. Maruyama, eds., The Japan Institute of Metals, Tokyo, 2007.
7. W. Chen and C.J. Boehlert: Metall. Mater. Trans. A, 2009, 40A, pp. 1568–78.10.1007/s11661-009-9838-9 ↗
8. C.J. Boehlert: Mater. Sci. Eng. A, 2009, vols. 510–511, pp. 434–39.10.1016/j.msea.2008.04.111 ↗
9. I. Sen, L. Maheshwari, S. Tamirisakandala, D.B. Miracle, and U. Ramamurthy: Mater. Sci. Eng. A, 2009, vol. 518, pp. 162–66.10.1016/j.msea.2009.04.039 ↗
10. C.J. Boehlert, S. Tamirisakandala, W.A. Curtin, and D.B. Miracle: Scripta Mater., 2009, vol. 61, pp. 245–48.10.1016/j.scriptamat.2009.03.054 ↗
11. W. Chen, C.J. Boehlert, E.A. Payzant, and J.Y. Howe: Int. J. Fatigue, 2010, vol. 32, pp. 627–38.10.1016/j.ijfatigue.2009.04.013 ↗
12. W. Chen and C.J. Boehlert: Int. J. Fatigue, 2010, vol. 32, pp. 799–807.10.1016/j.ijfatigue.2009.06.002 ↗
13. I. Sen and U. Ramamurty: Scripta Mater., 2010, vol. 62, pp. 37–40.10.1016/j.scriptamat.2009.09.022 ↗
14. V.K. Chandravanshi, R. Sarkar, P. Ghosal, S.V. Kamat, and T.K. Nandy: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 936–46.10.1007/s11661-009-0155-0 ↗
15. V.K. Chandravanshi, R. Sarkar, S.V. Kamat and T.K. Nandy: J. Alloys Compd., 2011, vol. 509, pp. 5506–514.10.1016/j.jallcom.2011.02.114 ↗
16. R. Sarkar, P. Ghosal, K. Muraleedharan, T.K. Nandy, and K.K. Ray: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4819–29.10.1016/j.msea.2011.03.014 ↗
17. K. Prasad, R. Sarkar, P. Ghosal, D.V.V. Satyanarayana, S.V. Kamat, and T.K. Nandy: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6733–41.10.1016/j.msea.2011.05.069 ↗
18. K. Prasad, R. Sarkar, S.V. Kamat, and T.K. Nandy: J. Alloys Compounds, 2011, vol. 509, pp. 7361–67.10.1016/j.jallcom.2011.04.111 ↗
19. S. Tamirisakandala, R.B. Bhat, J.S. Tiley, and D.B. Miracle: J. Mater. Eng. Perform. 2005, vol. 14(6), pp. 741–46.10.1361/105994905X75547 ↗
20. I. Sen, S. Tamirisakandala, D.B. Miracle, and U. Ramamurthy: Acta Mater., 2007, vol. 55, pp. 4983–93.10.1016/j.actamat.2007.05.009 ↗
21. K.S. Ravi Chandran, K.B. Panda, and S.S. Sahay: JOM, 2004, vol. 56, pp. 42–53.10.1007/s11837-004-0127-1 ↗
22. S. Tamirisakandala, R.B. Bhat, J.S. Tiley, and D.B. Miracle: Scripta Mater., 2005, vol. 53, pp. 1421–26.10.1016/j.scriptamat.2005.08.020 ↗
23. I. Sen, K. Gopinath, Ranjan Datta, and U. Ramamurthy: Acta Mater., 2010, vol. 58, pp. 6799–809.10.1016/j.actamat.2010.09.008 ↗
24. I. Sen, R.S. Kottada, and U. Ramamurthy: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6157–65.10.1016/j.msea.2010.06.044 ↗
25. S. Tamirisakandala, D.B. Miracle, R. Srinivasan, and J.S. Gunasekera: Adv. Mater. Process., 2006, vol. 12, pp. 41–43.
26. T. Saito: J. Met., 2004, vol. 56, pp. 33–36.10.1007/s11837-004-0125-3 ↗
27. C. Leyns and M. Peters, eds.: Titanium and Titanium Alloys, Wiley-VCH GmbH &Co. KGaA, Weinheim, 2003.
28. ASTM E-8, Annual Book of ASTM Standards, American Society of Testing and Materials, Philadelphia, PA, 2004, vol. 3.01, p. 62.
29. G. Lutjering and J.C. Williams: Titanium, Springer, Berlin, 2007.
30. S.L. Semiatin, J.F. Thomas, Jr., and P. Dadras: Metall. Mater. Trans. A, 1983, 14A, pp. 2363–74.10.1007/BF02663312 ↗
31. S.L. Semiatin, V. Seetharaman, and I. Weiss: Advances in the Science and Technology of Titanium Alloy Processing, I. Weiss, R. Srinivasan, P.J. Bania, D. Eylon and S.L. Semiatin, eds., TMS, Warrendale, PA, 1997, pp. 3–73.
32. T.K. Nandy, A. Bhattacharjee, A.K. Singh, and A.K. Gogia: Met. Mater. Process., 2006, vol. 18, pp. 289–308.
33. H. Mishra, P. Ghosal, T.K. Nandy, and P.K. Sagar: Mater. Sci. Eng. A, 2005, vol. 399, pp. 222–31.10.1016/j.msea.2005.03.027 ↗
34. H. Mishra, D.V.V. Satyanarayana, T.K. Nandy, and P.K. Sagar: Scripta Mater., 2008, vol. 59, pp. 591–94.10.1016/j.scriptamat.2008.05.009 ↗
35. C. Andres, G. Albrecht, and G. Luetjring: Z. Metallkd., 1997, vol. 88, pp. 197–203.
36. K.E. Thiehsen, M.E. Kassner, J. Pollard, D.R. Hiatt, and B.M. Bristow: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 1819–26.10.1007/BF02657856 ↗
37. S.L. Semiatin and G.D. Lahoti: Metall. Mater. Trans. A, 1983, vol. 14A, pp. 743–50.10.1007/BF02643791 ↗
38. R.S. Mishra and D. Banerjee: Mater. Sci. Eng. A, 1990, vol. 130, pp. 151–64.10.1016/0921-5093(90)90056-9 ↗
39. S. Ankem and S.R. Seagle: Titanium Science and Technology, Deutsche Gesellschaft fur Metallkunde, Oberursel, 1985, pp. 2411–18.