journal article·2013-11

On the Low Temperature Strain Aging of Bainite in the TRIP Steel

Ilana Timokhina, Hossein Beladi, Xiang-Yuan Xiong, Peter D. Hodgson

Publisher page

Abstract

The aging behavior of a thermomechanically processed Mo-Al-Nb transformation-induced plasticity steel with ultrafine microstructure was investigated using transmission electron microscopy and atom probe tomography (APT). Strain aging at 73 K (200 °C) for 1800 seconds led to a significant bake-hardening response (up to 222 MPa). Moreover, aging for 1800 seconds at room temperature after 4 pct pre-strain also revealed a bake-hardening response (~60 MPa). The experimental results showed the formation of carbon Cottrell atmospheres around dislocations and the formation of carbon clusters/fine carbides in the bainitic ferrite during aging. It is proposed that this is associated with the high dislocation density of bainitic ferrite with formation of a complex dislocation substructure after pre-straining and its high average carbon content (~0.35 at. pct). The segregation of carbon and substitutional elements such as Mn and Mo to the retained austenite/bainitic ferrite interface during aging was observed by APT. This segregation is likely to be the preliminary stage for Mo-C particles’ formation. The aging after pre-straining also induced the decomposition of retained austenite with formation of ferrite and carbides.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. L. Samek, E. De Moor, J. Penning, J.G. Speer and B.C. De Cooman: Metall. Mater. Trans. A, 2008, Vol. 39A, pp. 2543–53.
2. T. Waterschoot, A.K. De, S. Vandeputte and B.C. De Cooman: Metall. Mater. Trans. A, 2003, Vol. 34A, pp. 781–91.10.1007/s11661-003-1006-z ↗
3. I.B. Timokhina, P.D. Hodgson, E.V. Pereloma: Metall. Mater. Trans. A, 2007; Vol. 38A, pp. 2442–57.10.1007/s11661-007-9258-7 ↗
4. L.J. Baker, S.R. Daniel, J.D. Parker: Mater. Sci. Technol., 2002, Vol. 18, 355–68.10.1179/026708302225002452 ↗
5. B.C. De Cooman (2004) Curr. Opin. Solid State Mater. Sci. 8:285–303.10.1016/j.cossms.2004.10.002 ↗
6. I.B. Timokhina, M. Enomoto, M.K. Miller and E.V. Pereloma: Metall. Mater. Trans. A, 2012, Vol. 43A, pp. 2473–83.10.1007/s11661-012-1106-8 ↗
7. E.V. Pereloma, K.F. Russell, M.K. Miller and I.B. Timokhina: Scripta Mater., 2008, Vol. 58, pp. 1078–81.10.1016/j.scriptamat.2008.02.002 ↗
8. E.F. Rauch, S. Thuillier: Mater. Sci. Eng. A, 1993, 164, pp. 255–59.10.1016/0921-5093(93)90673-3 ↗
9. S. Thuillier, E.F. Rauch: Acta Metall. Mater., 1994, 42(6), pp. 1973–83.10.1016/0956-7151(94)90022-1 ↗
10. I.B. Timokhina, H. Beladi, X.Y. Xiong, P.D. Hodgson: Materials Science Forum, 2012; 706–709: pp. 2332–35.10.4028/www.scientific.net/MSF.706-709.2332 ↗
11. I.B. Timokhina: Ph.D. Thesis, Deakin University, Australia, 2003, pp. 82–118.
12. E.V. Pereloma, I.B. Timokhina, M.K. Miller and P.D. Hodgson: Acta Mater., 2007, Vol. 55, pp. 2587–98.10.1016/j.actamat.2006.12.001 ↗
13. B.D. Cullity: Elements of X-Ray Diffraction, New York: Addison-Wesley, 1978, p. 555.
14. P.B. Hirsch, R.B. Nicholson, A. Howie, D.W. Pashley and M.J. Whelan: Electron Microscopy of Thin Crystals. Butterworths, London, 1965, p. 51.
15. P.M. Kelly, A. Jostsons, R.G. Blake and J.G. Napier: Phys. Status Solidi, 1975, 31, p. 771.10.1002/pssa.2210310251 ↗
16. M.K. Miller: Atom Probe Tomography, New York, Kluwer Academic Press, 2005.
17. I. Tsukatani, S. Hashimoto and T. Innoue: ISIJ International, 1991, Vol. 31, No 9, pp. 992–1000.10.2355/isijinternational.31.992 ↗
18. Y. Tommita: Mater. Sci., 1995, Vol. 30, pp. 105–110.10.1007/BF00352138 ↗
19. I.B. Timokhina, P.D. Hodgson, E.V. Pereloma: Metall. Mater. Trans. A, 2003, Vol. 34A, pp. 1599–1609.10.1007/s11661-003-0305-8 ↗
20. H.K.D.H. Bhadeshia and D. Edmonds: Metall. Trans. A, 1979, Vol. 10A, pp. 895–907.10.1007/BF02658309 ↗
21. H.K.D.H. Bhadeshia: Bainite in Steels. The Institute of Materials, Cambridge University Press, Cambridge; 1992.
22. M. Onink, C.M. Brakman, F.D. Tichelaar, E.J. Mittemeijer, S. van der Zwaag and N.B. Konyer (1993) Scripta Metall. Mater. 29(8):1011–16.10.1016/0956-716X(93)90169-S ↗
23. I.B. Timokhina, E.V. Pereloma, P.D. Hodgson, M. Militzer, W.J. Poole, and E. Essadiqi eds.: 42 nd Conference Proceedings of CIM 2003, Transformation and Deformation Mechanisms in Advanced High Strength Steels, 2003, Vancouver, Canada, Canadian Institute of Mining, Metals and Petroleum 6, CD-ROM, pp. 331–35.
24. I.B. Timokhina, H. Beladi, X.Y. Xiong, Y. Adachi, P.D. Hodgson: Acta Mater., 2011, Vol. 59, pp. 5511–22.10.1016/j.actamat.2011.05.024 ↗
25. I.B. Timokhina, E.V. Pereloma, S.P. Ringer, R.K. Zheng, P.D. Hodgson: ISIJ International, 2010, Vol. 50 (4), pp. 574–82.10.2355/isijinternational.50.574 ↗
26. I.B. Timokhina, P.D. Hodgson and E.V. Pereloma: Metall. Mater. Trans. A, 2004, Vol. 35A, pp. 2331–41.10.1007/s11661-006-0213-9 ↗
27. J.J. Gracio: Mater. Sci. Eng. A, 1994, Vol. 174, pp. 111–19.10.1016/0921-5093(94)91118-5 ↗
28. N.A. Gjostein (1963) Metal Surfaces. ASM, Metals Park, OH, pp. 99–154.
29. G. Neumann and G.M. Neumann: Surface Self-Diffusion of Metals, Diffusion Monograph Series, F.H. Wohlbier, ed., 1972, vol. 1, p. 69.
30. A.H. Cottrell, B.A. Bilby: Proc. Phys. Soc., 1949, 63, pp. 49–62.10.1088/0370-1298/62/1/308 ↗
31. D. Kalish, M. Cohen: Mater. Sci. Eng., Vol. 6, 1970, p. 156–61.10.1016/0025-5416(70)90045-5 ↗
32. B.P. Sandvik: Metall. Trans. A, 1982, Vol. 13A, pp. 789–806.10.1007/BF02642392 ↗
33. T. Nakamura and S. Nagakura: International Conference on Martensite Transformation, ICOMAT 86, Japan Institute of Metals, Sendai, 1986, pp. 386–91.