Kinetics and Mechanisms of Isothermal Devitrification in Amorphous Cu50Zr50
Source abstract
Abstract
The crystallization kinetics and microstructural dynamics associated with devitrifying a melt-spun Cu50Zr50 metallic glass were investigated using isothermal treatments, in situ high-energy synchrotron X-ray diffraction, conventional and high-resolution transmission electron microscopy, and differential scanning calorimetry. The analysis of isothermal transformations allows us to more clearly unravel the complex interplay between nucleation and growth of competing stable and metastable phases. The isothermal devitrification response was found to involve the Cu10Zr7, CuZr2, and CuZr phases, consistent with previously reported constant heating rate experiments, but here we have resolved the phase evolution and structural characteristics of the transformation, including the very early stages of crystallization. At 671 K (398 °C), the isothermal transformation starts with the formation of the Cu10Zr7 phase, which grows in a generally equiaxed morphology. At a size of approximately 100 nm, the growth of the Cu10Zr7 particles is interrupted by the precipitation of a thin layer of the CuZr2 phase, upon which the metastable CuZr (B2) grows epitaxially. Crystallization kinetics are quantified here though in situ measurements (HEXRD, DSC) and ex situ microstructural analysis (TEM, HRTEM). Finally, the influences of chemical partitioning, diffusion, and crystallographic orientation on this sequence are examined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Phase-change materials and chalcogenides · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. J. Eckert, J. Das, S. Pauly, and C. Duhamel: J. Mater. Res. 2007, vol. 22, pp. 285–301.10.1557/jmr.2007.0050 ↗
2. R. Hasegawa: J. Magn. Magn. Mater., 2012, vol. 324(21), pp. 3555–57.10.1016/j.jmmm.2012.02.088 ↗
3. Inoue, A. and Zhang, W. 2004 Mater. Trans. 45(2), 584–587.10.2320/matertrans.45.584 ↗
4. R. Ray and B.C. Giessen, Scripta Metall., 1968, vol. 2 (6), pp. 357–5910.1016/0036-9748(68)90138-5 ↗
5. Xu, D., Lohwongwatana, B., Duan, G., Johnson, W. L., and Garland, C. (2004) Acta Mater. 52(9), 2621 – 2624.10.1016/j.actamat.2004.02.009 ↗
6. 6.R.L. Freed and J.B. Vander Sande: J. Non-Cryst. Solids, 1978, vol. 27(1), 9–28.10.1016/0022-3093(78)90032-7 ↗
7. D. Polk, C. Dube, and B. Giessen: The Effect of Oxygen Additions on the Properties of Amorphous Transition Metal Alloys, Defense Technical Information Center, 1978.
8. Kerns, A., Polk, D., Ray, R., and Giessen, B. (1979) Mater. Sci. Eng. 38(1), 49 – 53.10.1016/0025-5416(79)90031-4 ↗
9. Buschow, K. H. J. (1981) J. Appl. Phys. 52(5), 3319–3323.10.1063/1.329152 ↗
10. 10.Z. Altounian, T. Guo-hua, and J.O. Strom-Olsen, J. Appl. Phys., 1982, vol. 53(7), 4755–4760.10.1063/1.331304 ↗
11. Buschow, K. H. J. (1984) J. Phys. F: Met. Phys. 14(3), 593.10.1088/0305-4608/14/3/005 ↗
12. Dini, K. and Dunlap, R. A. (1985) J. Phys. F: Met. Phys. 15(2), 273.10.1088/0305-4608/15/2/005 ↗
13. M. Harmelin, A. Naudon, J.-M. Frigerio, and J. Rivory: in Rapidly Quenched Metals, S. Steeb and H. Warlimont, eds., Elsevier, Amsterdam, 1985, pp. 659–6210.1016/B978-0-444-86939-5.50158-5 ↗
14. Kneller, E., Khan, Y., and Gorres, U. Mar 1986 Z. Metallkd 77(3), 152–163.
15. Stelter, E. C. and Lazarus, D. Dec 1987 Phys. Rev. B 36, 9545–9558.10.1103/PhysRevB.36.9545 ↗
16. Lu, H., Bao, C., Xue, Q., and Tang, D. (1991) Appl. Phys. A. 52(5), 302–306.10.1007/BF00324769 ↗
17. Ohshiro, H. and Arakawa, T. November 1994 J. Alloys Compd. 215, 251–255.10.1016/0925-8388(94)90849-4 ↗
18. W.-N. Myung, H.-G. Kim, and T. Masumoto: Mater. Sci. Eng. A., 1994, Part 1(0), 179–180, 252–55.10.1016/0921-5093(94)90204-6 ↗
19. A. Pratap, A. Prasad, S. Joshi, N. Saxena, M. Saksena, and K. Amiya: International Symposium on Metastable, Mechanically Alloyed and Nanocrystalline Materials (ISMANAM-94)/European Meeting on Disordering and Amorphization, Grenoble, France, June 27–July 01, 1994, Transtec Publications Ltd., European Union, Japan Soc Powder & Powder Met, Ecole Electrochim & Electromet Grenoble, Zoz Gmbh, Kurimoto Ltd, Int Sci Fdn, ISF, Grenoble, Switzerland, 1995, vol. 179, pp. 851–54.10.4028/www.scientific.net/MSF.179-181.851 ↗
20. E. Leonova, S. Kaloshkin, and I. Tomilin: Izv. Ross. Akad. Nauk. Ser. Fiz. 2001, vol. 65 (10), pp. 1420–23.
21. Lad, K., Maaroof, M., Raval, K., Pratap, A., and Raval, K. (2002) Prog. Cryst. Growth Charact. Mater. 45(1–2), 15–19.10.1016/S0960-8974(02)00022-0 ↗
22. Kwon, O., Kim, Y., Kim, K., Lee, Y., and Fleury, E. (2006) Metals and Materials International 12(3), 207–12.10.1007/BF03027532 ↗
23. Kwon, O.-J., Lee, Y.-K., Park, S.-O., Lee, J.-C., Kim, Y.-C., and Fleury, E. (2007) Mater. Sci. Eng. A. 449–51(0), 169–71.10.1016/j.msea.2006.02.298 ↗
24. Louzguine-Luzgin, D. V., Xie, G., Zhang, W., and Inoue, A. AUG 2007 Mater. Trans. 48(8), 2128–32.10.2320/matertrans.MF200633 ↗
25. 25.N. Mattern, A. Sch ̈ops, U. Kuhn, J. Acker, O. Khvostikova, and J. Eckert: J. Non-Cryst. Solids , 2008, 354(10–11), pp. 1054–60.10.1016/j.jnoncrysol.2007.08.035 ↗
26. Mehta, N., Singh, K., and Saxena, N. (2008) Phys. B 403(21–22), 3928–3110.1016/j.physb.2008.07.016 ↗
27. Wang, X. D., Jiang, Q. K., Cao, Q. P., Bednarcik, J., Franz, H., and Jiang, J. Z. (2008) J. Appl. Phys. 104(9), 1–5.
28. 28.S. Pauly, J. Das, N. Mattern, D.H. Kim, and J. Eckert, Intermetallics, 2009, vol. 17(6), pp. 453–62.10.1016/j.intermet.2008.12.003 ↗
29. Fernández, R., Carrasco, W., and Zúñga, A. (2010) J. Non-Cryst. Solids 356(33–34), 1665–69.10.1016/j.jnoncrysol.2010.06.016 ↗
30. D.V. Louzguine-Luzgin, G. Xie, Q. Zhang, and A. Inoue: 2010
31. 3rd International Conference on Characterization and Control of Interfaces for High Quality Advanced Materials, Amer Ceram Soc: Amer Ceramic Soc., Kurashiki, Japan, 2009, vol. 219, pp. 3-8.
32. Louzguine-Luzgin, D., Xie, G., Zhang, Q., Suryanarayana, C., and Inoue, A. (2010) Metall. Mater. Trans. A 41A, 1664–69.10.1007/s11661-009-0087-8 ↗
33. Kalay, I., Kramer, M., and Napolitano, R. (2011) Metall. Mater. Trans. A 42A, 1144–53.10.1007/s11661-010-0531-9 ↗
34. Mattern, N., Shariq, A., Schwarz, B., Vainio, U., and Eckert, J. (2012) Acta Mater. 60(5), 1946–56.10.1016/j.actamat.2012.01.019 ↗
35. Cui, X., Zu, F., Wang, Z., Huang, Z., Li, X., and Wang, L. (2013) Intermetallics 36(0), 21–24.10.1016/j.intermet.2012.12.008 ↗
36. J. Jang and C.O.C.T. Koch: Scripta Metall., 1989, vol. 23 (10), pp. 1805–10.10.1016/0036-9748(89)90365-7 ↗
37. C. Tang and P. Harrowell: Nat. Mater. 2013, vol. 12(6), 507–11.10.1038/nmat3631 ↗
38. Zhou, S. and Napolitano, R. (2010) Acta Mater. 58(6), 2186–96.10.1016/j.actamat.2009.12.004 ↗
39. Carvalho, E. and Harris, I. (1980) J. Mater. Sci. 15(5), 1224–30.10.1007/BF00551811 ↗