journal article·2018-11Open access

Importance of Non-uniform Boundary Migration for Recrystallization Kinetics

Fengxiang Lin, Yubin Zhang, Wolfgang Pantleon, Dorte Juul Jensen

Abstract

Recrystallization kinetics is studied by three characterization methods: post-mortem electron microscopy, in situ three-dimensional X-ray diffraction (3DXRD), and ex situ electron microscopy. Cold-rolled copper is used as a model material. The post-mortem analysis shows that the average migration velocity of unimpinged recrystallizing boundaries decreases strongly with annealing time, leading to a low Avrami exponent. For individual grains, the in situ 3DXRD measurement reveals that the growth rates decrease significantly shortly after nucleation. This is explained by the ex situ characterizations, which show that different segments of the recrystallizing boundaries migrate with significantly different velocities, and some boundaries, although unimpinged, remain stationary. This non-uniform migration of recrystallizing boundaries leads to an amoeba-like growth, and is proposed to be responsible for the decrease of the average boundary migration velocity, because the fraction of slowly moving/stationary boundaries increases during the recrystallization. Reasons for stationary boundaries are discussed based on a quantitative analysis of the local deformed microstructure. It is concluded that non-uniform boundary migration has a significant influence on recrystallization kinetics and needs to be included in recrystallization models.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. W. A. Johnson, R. F. Mehl: Trans. AIME, 1939, vol. 135 (8), pp. 396–415.
2. M. Avrami: The Journal of Chemical Physics 1939, vol. 7 (12), pp. 1103–1112.10.1063/1.1750380 ↗
3. A.N. Kolmogorov: Bull. Acad. Sci. USSR Math. Ser., 1937, vol. 1, pp. 355–359.
4. H. Luo, J. Sietsma, S. Van Der Zwaag: Metallurgical and Materials Transactions A 2004, vol. 35 (6), pp. 1889–1898.10.1007/s11661-004-0097-5 ↗
5. R. A. Vandermeer, B. Rath: Metallurgical Transactions A 1989, vol. 20 (10), pp. 1933–1942.10.1007/BF02650280 ↗
6. R. A. Vandermeer, P. Gordon: Trans. Aime 1959, vol. 215, pp. 577–588.
7. T. Sabin, G. Winther, D. Juul Jensen: Acta Materialia 2003, vol. 51 (14), pp. 3999–4011.10.1016/S1359-6454(03)00220-9 ↗
8. A. Ridha, W. Hutchinson: Acta Metallurgica 1982, vol. 30 (10), pp. 1929–1939.10.1016/0001-6160(82)90033-5 ↗
9. F. Lin, Y. Zhang, N. Tao, W. Pantleon, D. Juul Jensen: Acta Materialia 2014, vol. 72, pp. 252–261.10.1016/j.actamat.2014.03.036 ↗
10. F. Humphreys: Acta Metallurgica 1977, vol. 25 (11), pp. 1323–1344.10.1016/0001-6160(77)90109-2 ↗
11. Y. Zhang, D. Juul Jensen, Y. Zhang, F. Lin, Z. Zhang, Q. Liu: Scripta Materialia 2012, vol. 67 (4), pp. 320–323.10.1016/j.scriptamat.2012.05.006 ↗
12. A. English, W. Backofen: Trans. TMS-AIME 1964, vol. 220, pp. 396–407.
13. D. Juul Jensen: Acta Metallurgica et Materialia 1995, vol. 43 (11), pp. 4117–4129.10.1016/0956-7151(95)00111-8 ↗
14. K. Mukunthan, E. Hawbolt: Metallurgical and Materials Transactions A 1996, vol. 27 (11), pp. 3410–3423.10.1007/BF02595434 ↗
15. R. A. Vandermeer, R. Masumura, B. Rath: Acta Metallurgica et Materialia 1991, vol. 39 (3), pp. 383–389.10.1016/0956-7151(91)90317-T ↗
16. E. Lauridsen, S. Schmidt, S. F. Nielsen, L. Margulies, H. Poulsen, D. Juul Jensen: Scripta Materialia 2006, vol. 55 (1), pp. 51–56.10.1016/j.scriptamat.2006.02.028 ↗
17. G. Wu, D. Juul Jensen: Philosophical Magazine 2012, vol. 92 (25-27), pp. 3381–3391.10.1080/14786435.2012.711494 ↗
18. F. Lin, Y. Zhang, W. Pantleon, D. Juul Jensen: Philosophical Magazine 2015, vol. 95 (22), pp. 2427–2449.10.1080/14786435.2015.1063787 ↗
19. C. M. Hefferan, J. Lind, S. F. Li, U. Lienert, A. D. Rollett, R. M. Suter: Acta Materialia 2012, vol. 60 (10), pp. 4311–4318.10.1016/j.actamat.2012.04.020 ↗
20. C. Xu, Y. Zhang, A. Godfrey, G. Wu, W. Liu, J. Z. Tischler, Q. Liu, D. Juul Jensen: Scientific reports 2017, vol. 7, pp. 42508.10.1038/srep42508 ↗
21. D. Field, L. Bradford, M. Nowell, T. Lillo: Acta Materialia 2007, vol. 55 (12), pp. 4233–4241.10.1016/j.actamat.2007.03.021 ↗
22. A. Vorhauer, S. Scheriau, R. Pippan: Metallurgical and Materials Transactions A 2008, vol. 39 (4), pp. 908–918.10.1007/s11661-007-9409-x ↗
23. F. Brisset, A.-L. Helbert, T. Baudin: Microscopy and Microanalysis 2013, vol. 19 (04), pp. 969–977.10.1017/S1431927613000299 ↗
24. Y. Jin, B. Lin, M. Bernacki, G. S. Rohrer, A. Rollett, N. Bozzolo: Materials Science and Engineering: A 2014, vol. 597, pp. 295–303.10.1016/j.msea.2014.01.018 ↗
25. W. Truszkowski, J. Kr’ol, B. Major: Metallurgical Transactions A 1980, vol. 11 (5), pp. 749–758.10.1007/BF02661204 ↗
26. F. Lin, T. Leffers, W. Pantleon, and D. Juul Jensen: Materials Science Forum, Vol. 753. Trans Tech Publication, Zurich, 2013, pp. 285–288.
27. G. Wu, D. Juul Jensen: Mater. Charact. 2008, vol. 59 (6), pp. 794–800.10.1016/j.matchar.2007.06.015 ↗
28. E.E. Underwood: Stereology and Quantitative Metallography. ASTM International, West Conshohocken, 1972.
29. S. O. Poulsen, E. M. Lauridsen, A. Lyckegaard, J. Oddershede, C. Gundlach, C. Curfs, D. Juul Jensen: Scripta Materialia 2011, vol. 64 (11), pp. 1003–1006.10.1016/j.scriptamat.2011.01.046 ↗
30. Y. Zhang, A. Elbrønd, F. Lin: Materials Characterization 2014, vol. 96, pp. 158–165.10.1016/j.matchar.2014.08.003 ↗
31. A. Godfrey, W. Cao, Q. Liu, N. Hansen: Metallurgical and Materials Transactions A 2005, vol. 36 (9), pp. 2371–2378.10.1007/s11661-005-0109-0 ↗
32. E. A. Jägle, E. J. Mittemeijer: Metallurgical and Materials Transactions A 2012, vol. 43A (4), pp. 1117–1131.10.1007/s11661-011-0959-6 ↗
33. Y. Lü, D. A. Molodov, G. Gottstein: Acta Materialia 2011, vol. 59 (8), pp. 3229–3243.10.1016/j.actamat.2011.01.063 ↗
34. H. Chao, H. Sun, W. Chen, E. Wang: Materials Characterization 2011, vol. 62 (3), pp. 312–320.10.1016/j.matchar.2011.01.007 ↗
35. G. Speich, R. Fisher: Recrystallization, American Society for Metals, Metals Park, 1966, p. 563.
36. R.A. Vandermeer, D. Juul Jensen: Jensen 2003, vol. 51 (10), pp. 3005–3018.10.1016/S1359-6454(03)00112-5 ↗
37. E. Villa, P. R. Rios: Acta Materialia 2009, vol. 57 (13), pp. 3714–3724.10.1016/j.actamat.2009.04.014 ↗
38. S. Storm, D. Juul Jensen: Scr. Mater., 2009, vol. 60 (7), pp. 477–480.10.1016/j.scriptamat.2008.11.020 ↗
39. R.A. Vandermeer: Acta Materialia 2005, vol. 53 (5), pp. 1449–1457.10.1016/j.actamat.2004.10.054 ↗
40. P. R. Rios, L. Pereira, F. Oliveira, W. Assis, J. Castro: Acta Materialia 2007, vol. 55 (13), pp. 4339–4348.10.1016/j.actamat.2007.04.003 ↗
41. P. R. Rios, R. Godiksen, S. Schmidt, D. Juul Jensen, R. Vandermeer: Scripta Materialia 2006, vol. 54 (8), pp. 1509–1513.10.1016/j.scriptamat.2005.12.037 ↗
42. B. Patterson and S. Grandhi: Proceedings of the 36th Riso International Symposium on Materials Science, Roskilde, Denmark, 2015, pp. 429–37.
43. A. Gokhale: Metallurgical Transactions A 1989, vol. 20 (3), pp. 349–355.10.1007/BF02653913 ↗
44. Y. Zhang, A. Godfrey, Q. Liu, W. Liu, D. Juul Jensen: Acta Mater., 2009, vol. 57 (9), pp. 2631–2639.10.1016/j.actamat.2009.01.039 ↗
45. M. Cook, T. Richards: J INST MET 1947, vol. 73, pp. 1–31.
46. D. Juul Jensen, T. Leffers: Stress Microstr., 1989, vol. 10 (4), pp. 361–373.10.1155/TSM.10.361 ↗
47. F. Haessner and S. Hofmann: Recrystallization of Metallic Materials (A79-22801 08-26), Dr. Riederer Verlag GmbH, Stuttgart, 1978, pp. 63–95.
48. A. Rollett, D. J. Srolovitz, R. Doherty, M. Anderson: Acta Metallurgica 1989, vol. 37 (2), pp. 627–639.10.1016/0001-6160(89)90247-2 ↗
49. M. Oyarzábal, A. Martínez-de Guerenu, I. Gutiérrez: Materials Science and Engineering: A 2008, vol. 485 (1), pp. 200–209.10.1016/j.msea.2007.07.077 ↗
50. B. Scholtes, R. Boulais-Sinou, A. Settefrati, D. P. Muñoz, I. Poitrault, A. Montouchet, N. Bozzolo, M. Bernacki: Computational Materials Science 2016, vol. 122, pp. 57–71.10.1016/j.commatsci.2016.04.045 ↗
51. L. Madej, M. Sitko, K. Radwanski, R. Kuziak: Materials Chemistry and Physics 2016, vol. 179, pp. 282–294.10.1016/j.matchemphys.2016.05.040 ↗
52. R. Doherty, I. Samajdar, C. Necker, H. Vatne, and E. Nes: Proceedings of the 36th RISO International Symposium on Materials Science, Roskilde, Denmark, 1995, pp. 1–23.
53. D. L. Olmsted, E. A. Holm, S. M. Foiles: Acta Materialia 2009, vol. 57 (13), pp. 3704–3713.10.1016/j.actamat.2009.04.015 ↗
54. P. A. Beck, P. R. Sperry, H. Hu: Journal of Applied Physics 1950, vol. 21 (5), pp. 420–425.10.1063/1.1699676 ↗
55. G. Fan, Y. Zhang, J.H. Driver, D. Juul Jensen: Scr. Mater., 2014, vol. 72, pp. 9–12.10.1016/j.scriptamat.2013.09.031 ↗
56. Y. Zhang, J. Budai, J.Z. Tischler, W. Liu, R. Xu, E. Homer, A. Godfrey, D. Juul Jensen: Sci. Rep., 2017, vol. 7, p. 4423.10.1038/s41598-017-04087-9 ↗
57. A. Gokhale, C. Iswaran, R. DeHoff: Metallurgical Transactions A 1979, vol. 10 (9), pp. 1239–1245.10.1007/BF02811979 ↗
58. J. Christian: The Theory of Transformation in Metals and Alloys Part. Pergamon, Oxford, 1981.
59. Y. Zhang, A. Godfrey, D. Juul Jensen: Scr. Mater., 2011, vol. 64 (4), pp. 331–334.10.1016/j.scriptamat.2010.10.028 ↗