Dendritic Growth, Solidification Thermal Parameters, and Mg Content Affecting the Tensile Properties of Al-Mg-1.5 Wt Pct Fe Alloys
Source abstract
Abstract
Les alliages Al-Mg-Fe sont désignés comme favorables en ce qui concerne les coûts et toutes les propriétés requises pour un service de navire réussi. Cependant, les interrelations expérimentales des paramètres thermiques de solidification, de la microstructure et de la résistance mécanique sont encore indéterminées. Dans le présent travail de recherche, les dépendances des propriétés de traction sur l'échelle de longueur de la morphologie dendritique des alliages ternaires Al-1,2 pct Mg-1,5 pct Fe et Al-7 pct Mg-1,5 pct Fe sont examinées. Les conditions transitoires de flux de chaleur pendant la solidification ont été obtenues par l'utilisation d'un système de solidification directionnelle, permettant ainsi une caractérisation complète des microstructures dendritiques à effectuer. Les calculs thermo-calcaires, la diffraction des rayons X et les analyses par microscopie électronique à balayage sont effectués pour soutenir l'évaluation microstructurale approfondie effectuée avec les deux alliages ternaires Al-Mg-Fe. Des relations de croissance expérimentales des espacements des bras de dendrite primaires, λ 1, et secondaires, λ 2, avec la vitesse de refroidissement ( $$ {\dot T}_{\rm{L}} $$ ) et des propriétés de traction avec λ 2 sont proposées. Pour les deux alliages examinés, les formules de type Hall–Petch montrent que la résistance à la traction augmente avec la diminution de λ 2. L'équilibre résistance-ductilité le plus sain est présenté par l'échantillon d'alliage Al-7 en poids pct Mg-1,5 en poids pct Fe avec une microstructure raffinée. Il est démontré que cela est dû à une distribution plus homogène des particules intermétalliques en relation avec le renforcement de la solution solide favorisé par le Mg. Des interrelations expérimentales fonctionnelles des propriétés de traction avec la croissance (V L) et les vitesses de refroidissement ( $$ {\dot T}_{\rm{L}} $$ ) pour les deux alliages ternaires Al-Mg-Fe ont également été dérivées.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. J.W. Bray: ASM Metals Handbook, 10th ed., vol. 2, ASM International, Metals Park, OH, 1976, pp. 148–49.
2. D.S. D’Antuono, J. Gaies, W. Golumbfskie, and M.L. Taheri: Scripta Mater., 2014, vol. 76, pp. 81–4.10.1016/j.scriptamat.2014.01.003 ↗
3. J.R. Davis: Corrosion of Aluminum and Aluminum Alloys, ASM International, Materials Park, OH, 1999.10.31399/asm.tb.caaa.9781627082990 ↗
4. E. Romhanji, E. Popovic, D. Glisic, R. Dodok, and D. Jovanovic: J. Mater. Process. Technol., 2006, vol. 177, pp. 386–9.10.1016/j.jmatprotec.2006.04.036 ↗
5. E. Ghassemieh: in New Trends and Developments in Automotive Industry, M. Chiaberge, ed., In Tech Europe, Rijeka, 2011, pp. 365–94.
6. F. Kabirian, A.S. Khan, and A. Pandey: Int. J. Plast., 2014, vol. 55, pp. 232–46.10.1016/j.ijplas.2013.11.001 ↗
7. G.B. Burger, A.K. Gupta, P.W. Jeffrey, and D.J. Lloyd: Mater. Charact., 1995, vol. 35, pp. 23–9.10.1016/1044-5803(95)00065-8 ↗
8. C. Vargel: Corrosion of Aluminium, 1st ed., Elsevier Science, 2004, pp. 63–64.10.1016/B978-008044495-6/50012-4 ↗
9. V.S. Zolotorevsky, N.A. Belov, and M.V. Glazoff: Casting Aluminum Alloys, vol. 12, Elsevier, Amsterdam, 2007.
10. P.R. Goulart, J.E. Spinelli, N. Cheung, N. Mangelinck-Noel, and A. Garcia: J. Alloys Compd., 2010, vol. 504, pp. 205–10.10.1016/j.jallcom.2010.05.089 ↗
11. S. Ji, W. Yang, F. Gao, D. Watson, and Z. Fan: Mater. Sci. Eng. A, 2013, vol. 564, pp. 130–9.10.1016/j.msea.2012.11.095 ↗
12. Z. Yi, Y.X. Gao, P.D. Lee, and T.C. Lindley: Mater. Sci. Eng. A, 2004, vol. 386, pp. 396–407.10.1016/S0921-5093(04)00964-5 ↗
13. Y.L. Liu and S.B. Kang: J. Mater. Sci., 1997, vol. 32, pp. 1443–7.10.1023/A:1018545732009 ↗
14. Y.L. Liu and S.B. Kang: Mater. Sci. Technol., 1997, vol. 13, pp. 331–6.10.1179/mst.1997.13.4.331 ↗
15. S. Kumar, N.H. Babu, G.M. Scamans, D.G. Eskin, and Z. Fan: Int. J. Mater. Res., 2012, vol. 103, pp. 1228–34.10.3139/146.110760 ↗
16. J.K. Kim, D.H. Shin, and W.J. Kim: Scripta Mater., 1998, vol. 38, pp. 991–8.10.1016/S1359-6462(97)00560-5 ↗
17. J.D. Hunt and S.Z. Lu: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 611–23.10.1007/BF02648950 ↗
18. D. Bouchard and J.S. Kirkaldy: Metall. Mater. Trans. B, 1997, vol. 28B, pp. 651–63.10.1007/s11663-997-0039-x ↗
19. J.M.V. Quaresma, C.A. Santos, and A. Garcia: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 3167–78.10.1007/s11661-000-0096-0 ↗
20. P.R. Goulart, J.E. Spinelli, W.R. Osorio, and A. Garcia: Mater. Sci. Eng. A, 2006, vol. 421, pp. 245–53.10.1016/j.msea.2006.01.050 ↗
21. J.E. Spinelli and A. Garcia: J. Mater. Sci. Mater. Electron., 2014, vol. 30, pp. 401–7.
22. P.R. Goulart, K.S. Cruz, J.E. Spinelli, I.L. Ferreira, N. Cheung, and A. Garcia: J. Alloys Compd., 2009, vol. 470, pp. 589–99.10.1016/j.jallcom.2008.03.026 ↗
23. P.R. Goulart, J.E. Spinelli, N. Cheung, and A. Garcia: Mater. Chem. Phys., 2010, vol. 119, pp. 272–8.10.1016/j.matchemphys.2009.08.063 ↗
24. M.V. Canté, C. Brito, J.E. Spinelli, and A. Garcia: Mater. Des., 2013, vol. 51, pp. 342–6.10.1016/j.matdes.2013.04.023 ↗
25. R.N. Duarte, J.D. Faria, C. Brito, N.C. Veríssimo, N. Cheung, and A. Garcia: Int. J. Mod. Phys. B, 2016, vol. 30, pp. 1550261-1–1550261-9.10.1142/S0217979215502616 ↗
26. A.P. Silva, J.E. Spinelli, and A. Garcia: J. Alloys Compd., 2009, vol. 475, pp. 347–51.10.1016/j.jallcom.2008.07.021 ↗
27. J.E. Spinelli, N. Cheung, P.R. Goulart, J.M.V. Quaresma, and A. Garcia: Int. J. Therm. Sci., 2012, vol. 51, pp. 145–54.10.1016/j.ijthermalsci.2011.08.014 ↗
28. M. Gunduz and E. Çadirli: Mater. Sci. Eng. A, 2002, vol. 327, pp. 167–85.10.1016/S0921-5093(01)01649-5 ↗
29. C. Brito, T.A. Costa, T.A. Vida, F. Bertelli, N. Cheung, J.E. Spinelli, and A. Garcia: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 3342–55.10.1007/s11661-015-2967-4 ↗
30. L.F. Mondolfo: Aluminum Alloys: Structure and Properties, Butterworth and Co. Ltd., London, 1976.
31. F. Bertelli, N. Cheung, I.L. Ferreira, and A. Garcia: J. Chem. Thermodyn., 2016, vol. 98, pp. 9–20.10.1016/j.jct.2016.02.018 ↗
32. I.L. Ferreira, J.F.C. Lins, D.J. Moutinho, L.G. Gomes, and A. Garcia: J. Alloys Compd., 2010, vol. 503, pp. 31–9.10.1016/j.jallcom.2010.04.244 ↗
33. M. Rappaz and W.J. Boettinger: Acta Mater., 1999, vol. 47, pp. 3205–19.10.1016/S1359-6454(99)00188-3 ↗