A Transient Heat Transfer Model for Assessment of Flash Temperature During Dry Sliding Wear in a Pin-on-Disk Tribometer
Source abstract
Abstract
In this research work, an analytical transient heat transfer model has been proposed for measurement of flash temperature in a pin-on-disk tribometer in view of the variation in coefficient of friction (dependent on wear mechanism). The model was successfully validated with experimental results of the present research work as well as with reported experimental data. The model also suggested a rise in flash temperature to a high level [441 K (168 °C)] resulting in an evolution of nodular oxide (Al2O3) that eventually reduced the wear loss to a considerable extent.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Tribology and Wear Analysis · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. S. Kumar, A. Bhattacharyya, D.K. Mondal, K. Biswas, and J. Maity: Wear, 2011, vol. 270, pp. 413–421.10.1016/j.wear.2010.12.007 ↗
2. C. Jaeger: J. Proc. R. Soc. N. S. W., 1942, vol. 76, pp. 203-224.
3. F.P. Bowden and D. Tabor: Friction and Lubrication of Solids. Part I, Clarendon Press, Oxford, 1954.
4. M. K. Kar, and S. Bahadur: Wear, 1981, vol. 67, pp. 71–84.10.1016/0043-1648(81)90076-4 ↗
5. A. Yevtushenko, O. Ukhanska, and R. Chapovska: Wear, 1996, vol. 196, pp. 219-225.10.1016/0043-1648(95)06911-9 ↗
6. A. Yevtushenko, and J. Tolstoj-Sienkiewicz: Arch. Appl. Mech., 2006, vol. 76, pp. 33–47.10.1007/s00419-006-0003-2 ↗
7. R. A. Singh, G.S.V.L Narasimham, and S. K. Biswas: Tribol. Lett., 2002, vol. 12, pp. 203-207.10.1023/A:1015434909963 ↗
8. H. So: Tribol. Int., 1996, vol. 29, pp. 415-423.10.1016/0301-679X(95)00097-N ↗
9. H. So, and D. C. Liu: Wear, 1991, vol. 146, pp. 201-218.10.1016/0043-1648(91)90063-Z ↗
10. A. Evtushenko, and Y. Tolstoi-Senkevicha: J. eng. phys. Thermophys., 2007, vol. 80, pp. 136-143.10.1007/s10891-007-0019-7 ↗
11. N. Laraqi, N. Alilat, J. M. Garcia de Maria, and A. Bairi: Wear, 2009, vol. 266, pp. 765–770.10.1016/j.wear.2008.08.016 ↗
12. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng., 1987, vol. 93, pp.107-117.10.1016/0025-5416(87)90417-4 ↗
13. D. Kuhlmann-Wilsdorf: J. Tribol., 1987, vol. 109, pp. 321-329.10.1115/1.3261361 ↗
14. X. Tian and F.E. Kennedy Jr: J. Tribol., 1994, vol. 116, pp. 167-174.10.1115/1.2927035 ↗
15. B. Gecim and W.O. Winer: J. Tribol., 1985, vol 107, pp. 333-341.10.1115/1.3261068 ↗
16. T.F.J. Quinn and W.O. Winer, J. Tribol., 1987,vol 109, pp. 315-319.10.1115/1.3261358 ↗
17. J.P. Holman: Heat Transfer, 6th ed., McGraw-Hill Book Co., New York, 1986, pp. 136–38.
18. Anon: Metals Handbook, 10th ed., ASM International, Materials Park, OH, 1990.
19. Anon: Thermal Properties of Metals, ASM Ready Reference. ASM International, Materials Park, OH, 2002.
20. R. Choudhary, H. Kumar, and R. K. Garg: Indian J. Eng. Mater. Sci., 2010, vol.17, pp. 91-98.
21. G. Straffelini, D. Trabucco, and A. Molinari: Wear 2001, vol. 250, pp. 485–491.10.1016/S0043-1648(01)00661-5 ↗
22. Anon: Metals Handbook, 10th ed., ASM International, Materials Park, OH, 1990.
23. M. K.Mondal, K. Biswas and J. Maity: Mater. Sci. Technol., 2013, vol. 29(11), pp. 1394-1402.10.1179/1743284713Y.0000000273 ↗
24. G.W. Stachoiak and A.W. Batchelor: Engineering Tribolog, Tribology series 24, Elsevier, Amsterdam, 1993.
25. F. H. Stott: Tribol. Int., 1998, vol. 31, pp. 61–71.10.1016/S0301-679X(98)00008-5 ↗
26. S. Natarajan, R. Narayanasamy, S. P. Kumaresh Babu, G. Dinesh, B. Anil Kumar, and K. Sivaprasad: Mater. Des., 2009, vol. 30, pp. 2521-2531.10.1016/j.matdes.2008.09.037 ↗
27. R. L. Deuis, C. Subramanian, and J. M. Yellup: Compos. Sci. Technol., 1997, vol. 57, pp. 415-435.10.1016/S0266-3538(96)00167-4 ↗
28. J. Jiang, F. H. Stott, and M. M. Stack: Wear, 1995, vol. 181-183, pp. 20-31.10.1016/0043-1648(95)90004-7 ↗