journal article·2013-05Open access

Bulk Metallic Glass Multiscale Tooling for Molding of Polymers with Micro to Nano Features: A Review

David J. Browne, Dermot Stratton, Michael D. Gilchrist, Cormac J. Byrne

Abstract

There is a growing demand for single-use disposable polymer devices with features at submicron scales. This requires resilient tooling which can be patterned to scales of the order of hundreds of nanometers. The requisite topology can be imparted to silicon, but it is too brittle to be of use in a die to mold thousands of plastic parts. The polycrystalline nature of tool steel means that it cannot be patterned with submicron detail. Some bulk amorphous alloys have the requisite mechanical properties to be viable as materials for such dies, and can be patterned—e.g., via embossing as a supercooled liquid into MEMS silicon or using focused ion beam (FIB)—with submicron features which may persevere over many thousands of molding cycles. The composition of the amorphous alloy must be carefully selected to suit the particular molding application (polymer/process). The state-of-the-art methodology is presented, along with results of our recent experimental investigations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanofabrication and Lithography Techniques · Advanced Surface Polishing Techniques · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Frost & Sullivan, Private Report, August 2011, Frost & Sullivan, Mountain View, CA
2. Yole Développement, Report, July 2011, Yole Développement SA, Lyon, France.
3. C.T. Pan, M.F. Chen, P.J. Cheng, Y.M. Hwang, S.D. Tseng and J.C. Huang, Sensors & Actuators A, 2009, vol. 150, pp. 156-167.10.1016/j.sna.2008.12.010 ↗
4. D. Wang, G. Liao, J. Pan, Z. Tang, P. Peng, L. Liu and T. Shi (2009) J. Alloys Cmpds, 2009, vol. 484, pp. 118-122.10.1016/j.jallcom.2009.04.092 ↗
5. N. Zhang, C.J. Byrne, D.J. Browne and M.D. Gilchrist, Materials Today, 2012, vol.15. pp. 216-221.10.1016/S1369-7021(12)70092-5 ↗
6. D.J. Stratton, C. Byrne, J. Mulcahy, and D.J. Browne: MRS Proceedings, 2011, vol. 1300, mrsf10-1300-u02-08.10.1557/opl.2011.273 ↗
7. SEMI MS9-0611, Specification for High Density Permanent Connections Between Microfluidic Devices, SEMI Global Headquarters, San Jose, CA.
8. H.N. Hansen, R.J. Hocken and G. Tosello, CIRP Annals—Manufacturing Technology, 2011, vol. 60, pp. 695-714.10.1016/j.cirp.2011.05.008 ↗
9. N. Zhang and M.D. Gilchrist, Polym. Test., 2012, vol. 31, pp. 748–758.10.1016/j.polymertesting.2012.04.012 ↗
10. N. Zhang, J.S. Chu, C. Byrne, D.J. Browne and M.D. Gilchrist, Journal of Micromechanics and Microengineering, 2012, vol. 22, 065019.10.1088/0960-1317/22/6/065019 ↗
11. M.R. Kamal, J.S. Chu, S. Derdouri and A. Hrymak, Plast. Rubber Compos., 2010, vol. 39, pp. 332–341.10.1179/174328910X12691245470518 ↗
12. B.R. Whiteside, R. Spares, K. Howell, M.T. Martyn and P.D. Coates, Plast. Rubber. Compos, 2005, vol. 34, pp. 380–386.10.1179/174328905X72011 ↗
13. C.J. Byrne, M. Eldrup, M. Ohnuma and R.S. Eriksen, Journal of Materials Processing Technology, 2010, vol. 210, pp. 1419–1428.10.1016/j.jmatprotec.2010.03.016 ↗
14. N. Lee, S-D. Moon, S. Kang and S. Ahn, Optical Review, 2003, Vol. 10, pp. 290-294.10.1007/s10043-003-0290-6 ↗
15. S. Ding, J. Kong and J. Schroers, J. Appl. Phys., 2011, vol. 110, 04350810.1063/1.3615630 ↗
16. T. Zhang, X. Zhang, W. Zhang, F. Jia, A. Inoue, H. Hao and Y. Ma, Mater. Lett., 2011, vol. 65, pp. 2257–2260.10.1016/j.matlet.2011.04.033 ↗
17. C. Byrne, A.M. Kueck, S.P. Baker and P.H Steen, Mater. Sci. Eng. A, 2007, vol. 459, pp. 172-181.10.1016/j.msea.2006.12.123 ↗
18. J.G. Lee, S.S. Park, S.B. Lee, H.-T. Chung, and N.J. Kim, Scripta Materialia, 2005, vol. 53, pp. 693–697.10.1016/j.scriptamat.2005.05.018 ↗
19. G. Duggan and D.J. Browne, Transactions of the Indian Institute of Metals, 2009, vol. 62, pp. 417-421.10.1007/s12666-009-0057-2 ↗
20. [20] D. East, M. Kellam, M.A. Gibson, A. Seeber, D. Liang and J.-F. Nie, Mater. Sci. Forum, 2010, vol. 654-656, pp. 1078-1081.10.4028/www.scientific.net/MSF.654-656.1078 ↗
21. Y. Kawamura, T. Nakamura, H. Kato, H. Mano, and A. Inoue, Materials Science and Engineering, 2001, vol. A304–306, pp. 674–678.10.1016/S0921-5093(00)01562-8 ↗
22. G. Kumar, H.X. Tang and J. Schroers, Nature, 2009, vol. 457, pp. 868-872.10.1038/nature07718 ↗
23. .F. Liu, C.T. Pan, K.H. Liu, Y.C. Chen, J.L. Chen, and J.C. Huang, J. Materials Engineering & Performance 20 (2011) pp. 1544-155310.1007/s11665-011-9836-0 ↗
24. C.T. Pan, T.T. Wu, Y.T. Liu, Y. Yamagata and J.C. Huang, Journal of Materials Processing Technology, 2009, vol. 209, pp. 5014–5023.10.1016/j.jmatprotec.2009.01.025 ↗
25. J. A. Wert, C. Thomsen, R.D. Jensen and M. Arentoft, Journal of Materials Processing Technology, 2009, vol. 209, pp. 1570-1579.10.1016/j.jmatprotec.2008.04.005 ↗
26. J.A. Bardt, G.R. Bourne, T.L. Schmitz, J.C. Ziegert and W.G. Sawyer, J. Mater. Res., 2007, vol. 22, pp. 339-343.10.1557/jmr.2007.0035 ↗
27. J.J. He, N. Li, N. Tang, X.Y. Wang, C. Zhang and L. Liu, Intermetallics, 2012, vol. 21, pp. 50-55.10.1016/j.intermet.2011.10.001 ↗
28. J. Schroers, Q. Pham and A. Desai , Journal of Microelectromechanical Systems, 2007, vol. 16, pp. 240-247.10.1109/JMEMS.0007.892889 ↗
29. N. Chen, H. A. Yang, A. Caron, P. C. Chen, Y. C. Lin, D. V. Louzguine-Luzgin, K. F. Yao, M. Esashi and A. Inoue, J Mater Sci, 2011, vol. 46, pp. 2091–2096.10.1007/s10853-010-5043-x ↗
30. [30] G. Kumar, A, Desai and J. Scroers, Adv. Mater., 2011, vol. 23, pp. 461–476.10.1002/adma.201002148 ↗
31. N.H. Pryds, Mat. Sci. Eng. A, 2004, vol. 186, pp. 375-377.
32. M. Carmo, R.C. Sekol, S. Ding, G. Kumar, J. Schroers and A.D. Taylor, ACS Nano, 2011, vol. 5, pp. 2979-2983.10.1021/nn200033c ↗
33. B. Sarac, G. Kumar, T. Hodges, S. Ding, A. Desai and J. Schroers, Journal of Microelectromechanical Systems, 2011, vol. 20, pp. 28-36.10.1109/JMEMS.2010.2090495 ↗
34. A. Wiest, J. S. Harmon, M. D. Demetriou, R. D. Conner and W. L. Johnson, Scripta Mater., 2009, vol. 60, pp. 160-163.10.1016/j.scriptamat.2008.09.021 ↗
35. M. D. Demetriou, M.E. Launey, G. Garrett, J.P. Schramm,D.C. Hofmann, W. L. Johnson and R.O. Ritchie, Nature Materials, 2011, vol. 10, pp. 123-128.10.1038/nmat2930 ↗
36. A.L. Greer, Nature Materials, 2011, vol.10, pp. 88-89.10.1038/nmat2949 ↗
37. K. Fujita, Y. Morishita, N. Nishiyama, H, Kimura and A. Inoue, Materials Transactions, 2005 vol. 46, pp. 2856-2863.10.2320/matertrans.46.2856 ↗
38. M. Bakkal and V. Naksiler, Materials and Manufacturing Processes, 2009, vol. 24, pp. 1249–1255.10.1080/10426910903129711 ↗
39. S. H. Yeo, P.C. Tan, E. Aligiri, S.B. Tor and N.H. Loh, Materials and Manufacturing Processes, 2009, vol. 24, pp. 1242–1248.10.1080/10426910903129661 ↗
40. J.A. Koza, R. Sueptitz, M. Uhlemann, L. Schultz and A. Gebert, Intermetallics, 2011, vol. 19, pp. 437-444.10.1016/j.intermet.2010.10.025 ↗
41. S.N. Aqida, D Brabazon, S. Naher, Z. Kovacs and D.J. Browne, Applied Physics A: Materials Science & Processing, 2010, vol. 101, pp. 357-360.10.1007/s00339-010-5829-3 ↗
42. Y. Yang, J.C. Ye, J. Lua, F.X. Liu and P.K. Liaw, Acta Materialia, 2009, vol. 57, pp. 1613–1623.10.1016/j.actamat.2008.11.043 ↗
43. [43] B. W. Zhou, X. G. Zhang, W. Zhang, H. Kimura, T. Zhang, A. Makino and A. Inoue, Materials Transactions, 2010, Vol. 51, pp. 826 to 829.10.2320/matertrans.MBW200928 ↗
44. W. Kai, I.F. Ren, P.C. Kao, R.F. Wang, C.-P. Chuang, M.W. Freels and P.K. Liaw, Advanced Engineering Materials, 2009, vol. 11, pp. 380-386.10.1002/adem.200800366 ↗
45. W. Kai, T.H. Ho, H.H. Hsieh, Y.R. Chen, D.C. Qiao, F. Jiang, G. Fan and P.K. Liaw, Metall. Mater. Trans. A, 2009, vol. 39A, pp. 1838-1846.
46. J.L. Zhang, W.H. Cao and C. H. Shek, J. Alloys Comps., 2011, vol. 509S, S219-S222.10.1016/j.jallcom.2011.01.076 ↗
47. D.L. Hennan, V. Srivastava, H.K. Taylor, M.R. Hale, D.E. Hardt and L. Anand, J. Micromech. Microeng., 2009, vol. 19, 115030.10.1088/0960-1317/19/11/115030 ↗